Quick Question!

Have you ever purchased from PartSelect.com before?

395284-1-S-Whirlpool-833697            -Condenser Fan Motor Kit
395284-1-S-Whirlpool-833697            -Condenser Fan Motor Kit 395284-2-S-Whirlpool-833697            -Condenser Fan Motor Kit https://www.partselect.com/Schematics/Maytag/14290.gif

Condenser Fan Motor Kit

Your Price

$37.73
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS395284
Manufacturer Part Number 833697
Manufactured by Whirlpool

This condenser fan motor kit is designed for use with refrigerators. This fan draws air through the condenser coils and over the compressor. It does this with the goal of cooling the warm refrigerant before it enters the evaporator. When your fan or fan motor is not working your refrigerator will not cool properly. This is a 2-Watt, 115 Volt motor that rotates the fan in a counter clockwise direction. This kit includes the hardware needed for installation, and a set of instructions. Before you begin any repair work make sure to unplug your appliance.

This part works with the following brands: Kenmore, Amana, Whirlpool, Admiral, Maytag, Magic Chef, KitchenAid, Crosley, Jenn-Air, Roper, Litton, Hoover, International, Norge, Estate, Gibson, Caloric, General Electric.

This part works with the following products: Refrigerator, Freezer, Dryer.

This part fixes the following symptoms:

  • Freezer section too warm.
  • Noisy.
  • Fridge too warm.
  • Fridge runs too long.
  • Will Not Start.
  • Fridge and Freezer are too warm.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Condenser Fan Blade

Part Number 1672384

$20.09
No Longer Available

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful

Question:

Freezer is working fine but the refrigerator is too warm. Hovering around 55 degrees. The compressor fan seems to be working. Maybe not working as efficiently?

Chris for model number ET22PKXWN10
Answer:

Hi Chris, Thank you for the question. I suggest checking the Door gasket first. Make sure there are no gaps that could let the warm air leak through. In the evening when the room is dark you can put a flash light in the fridge and see if there is any light coming through once the door is closed. If you see light then the gasket will need to be replaced. If the gasket is fine you can check the Evaporator Fan Motor at the back of the freezer. This part pulls air into the evaporator coils and then disperses the air in a continuous motion throughout the refrigerator and freezer.If this is not working then the cold air is not flowing in to the fridge section as it should. It can get build up of dust and dirt over time and sometimes needs a cleaning so the fan it working properly. Since you are back there it sometimes help to vacuum off the coils! Hope this helps!

1 person found this helpful.
Question:

To determine which direction a motor is turning do i look at the shaft or do i look at the opposite end

George
Answer:

Hello George, thank you for contacting us. For the fan motor it would spin clockwise. Good luck with the repair!

Most Recent

Question:

Lately it wasn't cooling properly. I cleaned the coils which was very dirty and notice the fan wasn't turning. I turned the fan blade and it started turning. It has been working great for about 2 months, today it wasn't cooling properly again and the outsides was real warm. I checked the fan and it wasn't turning, i turned the fan lightly and it started spinning again, what part do i need to check or replace?

Scott for model number whirlpool ET18PKXAW01
Answer:

Hello Scott, thank you for contacting us. That would be a weak fan motor, you would just need to replace that to fix the issue. Good luck with the repair!

Question:

My refrigerator is not cooling properly. I can feel the cold air being distributed in the freezer compartment but there is no air coming through the vents in the refrigerator section. The condensor fan seems to be spinning underneath the fridge. Which part would you consider needing to be replaced?

chris for model number ET22PKXWN10
Answer:

Hi Chris, Thank you for your inquiry. If your refrigerator is not cooling properly, there are a few parts you will need to check. You will need to check the defrost timer, the condenser fan motor kit, the capacitor, the evaporator fan motor kit, the cold control thermostat, the fresh food door gasket, the start relay cover and the light rocker switch. I hope this helps. Thank you and have a great day!

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.1 / 5.0, 37 reviews What's this?
31-37 of 37
 

1 of 2 people found this instruction helpful

Parts Used:
  • Condenser Fan Motor Kit
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers
Customer: craig from maple grove, MN

Noisy fridge, perimeter of door heating up

figured out the condenser fan was kaput. Tried WD, worked for several days then gave out completely. Took off back of fridge and trained small fan on compressor while I ordered new condenser fan. The swap was easy, undid the housing bolts, stripped off the connector, reconnected and voila! works perfect.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Condenser Fan Motor Kit
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Socket set
Customer: William from Milford, MA

Freezer and food section too warm

removed lower back cover. diconnected fan ass'y electrical connection, removed fan housing (3 screws). removed fan motor from housing. cut old connector from fan and installed on new fan with wire nuts included. re-installed new fan to housing and re-installed housing to frame.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Condenser Fan Motor Kit
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set, Wrench set
Customer: william from whitwell, TN

Fan motor had gone bad

I removed the nuts that held the motor mount, then removed fan blade, cut the wires, and slid the motor pass the mounts and the coil shroud, Installed motor in reverse order. worked out ok.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 5 people found this instruction helpful

Parts Used:
  • Condenser Fan Motor Kit
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Socket set
Customer: Al from Tonka Bay, MN

Condenser fan failure

Partition between Freezer and Fridge was running very hot. (Warm is normal). Oiling fan did not work. The only problems encountered in the replacement were getting fan out and in through coolant lines, cut plug off to accomodate generic fan wiring, getting the screws back in without cooking your hand on a hot compressor. Unit works great!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 6 people found this instruction helpful

Parts Used:
  • Condenser Fan Motor Kit
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers, Wrench set
Customer: Jeremy from State College, PA

Refrigerator would not stay cold

Removed rear cover to see non-operating fan - removed three mounting screws on the motor that were a challenge to access. Swapped fan from old motor onto new motor - one threaded nut on the motor shaft. Spliced new fan wires into fan wires of the wiring harness and mounted with three self-tapping screws supplied with new fan motor. Replaced rear cover and plugged it in! Now the refrigerator cools like new (1981 model side-by-side Admiral)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 3 people found this instruction helpful

Parts Used:
  • Condenser Fan Motor Kit
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Richard from Morgan, UT

Noisey fan

yup

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 1- 2 hours
Tools:
Customer: James from massapequa, NY

Waterhose socket leaked- fan didn't work and kick grid was broken

We followed directions and thank god my husbund is a electrician. He was able to reconnect the water-- make the fan work and replace the kick grille. Very happy everything worked.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

31-37 of 37

Model Cross Reference

This part works with the following models:

PartSelect Number: PS395284
Manufacturer Part Number: 833697
Brand Model Number Description
Kenmore106106-8130600Refrigerator
Kenmore106106-8130610Refrigerator
Kenmore106106-8130620Refrigerator
Kenmore106106-8130630Refrigerator
Kenmore106106-8130640Refrigerator
Kenmore106106-8130650Refrigerator
Kenmore106106-8130660Refrigerator
Kenmore106106-8130680Refrigerator
Kenmore106106-8130690Refrigerator
Kenmore1061068130670Refrigerator
Kenmore10650202990Refrigerator
Kenmore10650202991Refrigerator
Kenmore10650202992Refrigerator
Kenmore10650202993Refrigerator
Kenmore10650203990Refrigerator
Kenmore10650203991Refrigerator
Kenmore10650203993Refrigerator
Kenmore10650204990Refrigerator
Kenmore10650204991Refrigerator
Kenmore10650209990Refrigerator
Kenmore10650209991Refrigerator
Kenmore10650257000Refrigerator
Kenmore10650257001Refrigerator
Kenmore10650259001Refrigerator
Kenmore10650262990Refrigerator
Kenmore10650262992Refrigerator
Kenmore10650264990Refrigerator
Kenmore10650264992Refrigerator
Kenmore10650267990Refrigerator
Kenmore10650267991Refrigerator