Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Valerie S - May 26, 2023
Verified Purchase
Top spray arm assembly
Part was exactly what I needed. Easy to install. Took 10 seconds to snap in place. The top spray arm spins as it should with the clip and top spray arm. The clip is what I needed as the old one no longer held the arm in place. Would be nice to be able to order only a replacement top arm clip though instead of the spray arm also. Part works as it should and delivered fast.
★★★★★
★★★★★
John Z - November 26, 2022
Verified Purchase
Easy fix
The exact part I needed. The repair went well,
★★★★★
★★★★★
William D K - February 25, 2022
Verified Purchase
Part Solved the problelm.
Part was easy to install; took about 10 minutes. Many Thanks; I'll be back next time.
★★★★★
★★★★★
Richard R - November 3, 2021
Verified Purchase
Great vIdeo installation guide!
Easy order - fast delivery, but the video on how to install the part was above expectations!
★★★★★
★★★★★
Catherine B - September 25, 2021
Verified Purchase
Fast fix
The video made fitting the part a snap!
★★★★★
★★★★★
Edward C - May 29, 2021
Verified Purchase
Good service and correct part
Chellesey took the time to see the status of my part and let me know the expected delivery. Part fit perfectly and I like the video instructions that are included.
★★★★★
★★★★★
Frank S - February 26, 2021
Verified Purchase
Easy Repair
This was the part I needed to make an easy repair. The PartSelect site made it a snap for me to figure out that this was the part I needed. The video confirmed it and the part arrived and went in place as described. Couldn't be more happy with the overall service.
★★★★★
★★★★★
DONNA M - February 18, 2021
Verified Purchase
Easy repair
Got it, installed it. Works great and received in timely fashion
★★★★★
★★★★★
Jim K - February 8, 2021
Verified Purchase
Good part
Good part and service.
★★★★★
★★★★★
Kevin S - January 7, 2021
Verified Purchase
Exact replacement
Fast shipping. Right part. Got my dishwasher running again.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 61 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Spinner attached to the upper wash arm needed replacing.
After watching the video on the PartSelect website, followed these steps: 1. Removed both drawers. 2. Loosened upper wash arm by depressing holding clips. 3. Rotated wash arm clockwise a little bit, then removed it by depressing the holding clip. 4. Attached new spinner with the supplied fastener. 5. Reattached wash arm. Very easy.
Donald from SAN RAMON, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper Wash Arm was detaching account worn attachment fastener
1. Remove upper dish basket (Where glasses and cups go) from dish washer by removing end caps from roller tracks (spring loaded button releases them. 2. Cover bottom of dishwasher with a towel to prevent parts loss. 3. remove old male wash arm fastener and replace with a new by slightly bending the spray assembly away from the top of the
... Read moredishwasher enclosure. 4. Put female portion of wash arm fastener in hole in wash arm and push into spray assembly so that it snaps into the male end of fastener by pinching the two fasteners together between thumb and opposing finger. 5. Remove towel and reinstall upper basket.
Read less
Alan from COLUMBINE VLY, CO
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer arm fell off
The arm stays in by a simple plastic pin that fits into the arm that hangs on top of the dishwasher. That pit drops into an indentation on the arm, and snaps into a plastic bolt type of thing that holds the arm and allows it to spin. The plastic wore loose over a decade, and the new parts just snap in. It's a little tricky to feel where t
... Read morehe top piece fits. I put a dishtowel below over the racks, in case the part dropped, so I wouldn't lose it in the bottom area of the dryer. It snapped in very easily once the parts were in place.
Read less
Carole from NEW YORK, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper wash arm fell off
Installed new upper arm kit. Removed both baskets . Covered sump/drain area with a towel. Snapped the new arm onto the bar at the top of the dishwasher
Pasquale from PRT WASHINGTN, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper washer arm pin wore out.
1 minute repair if the old wash arm is already off. Even fixed it with the dishwasher full. It's to bad you can't just buy the pin that holds it on.
Stephen from LOVELAND, CO
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The spray arm came off
I watched the video on line first. Then, I followed instructions from the video in my repairs. It was very easy. Thank you. It was that easy.
Wilbur from LOCUST GROVE, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper Wash Arm fell into washer
Followed the video provided by this site. Since the old Upper Wash Arm had come unfastened and fell, did not have to remove the assembly that holds it. Simply removed the lower basket and upper basket, held the new part in place and gently depressed the arm of the upper assembly along the roof of the washer, and snapped the fastner with
... Read moremy finger.
Read less
Jeff from CLEWISTON, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper spray arm fell off
Ordered the part, snapped it on per your video. DONE
Kenneth from ELMA, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper wash rotating arm detatched
See previous advice. Make sure you place a bath towel in bottom of machine to prevent dropped parts getting into drain. slightly push down on upper water supply tube to permit room to get finger and attaching button in place. Squeeze button by opposing finger and thumb to snap together the arm keeper receptacle and arm.
Alan from Columbine Valley, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The upper wash arm came off and there was a piece missing.
I Googled the part number and "repair instructions". Someone else, who had experienced the same problem, wrote a paragraph on how to do it. The most important thing he had to say was "place something under the arm to catch any parts you might drop". I'm finding that you can usually find instructions on the web to fix almost anything.
... Read more Sometimes, you're even lucky enough to get a YouTube video with step by step instructions. Thanks for the speedy service!
Read less
William from Williamsburg, VA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mary
February 8, 2020
I found part 8538389, resting on the top rack of our kitchenaide dishwasher. Can i easily reinstall it. Can i run dishwasher without it in place?
Hello Mary,
Thank you for your question. You can easily reinstall the upper wash arm by following the installation video on our site for the part, and we suggest you install it because although it is possible to run the dishwasher without it, it could cause the dishes to not clean as well, and possible damage the water outlet the spray arm attaches too. We hope this helps.
8 people found this helpful.
Was this helpful?
Thank you for voting!
Christine
September 2, 2019
Regarding the upper spray arm kit, can I purchase only the bearing and the rivet? I don’t need the sprayer since i still have the one that came off.
For model number KUDR01TJBL0
Hello Christine, Thank you for the question. Very sorry but the parts are only sold as part of the kit. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Duane
November 22, 2018
Lower spray arm seems to be working and the dishes clean fine on bottom rack, but the upper rack doesn't get clean. I don't believe the upper sprayer is working so checked water channel to top and seem to be open. Could it be the water pump not providing enough water pressure for the upper sprayer arm even if the bottom arm is working?
For model number 66516473300
Hi Duane, thank you for your question. That could be. I would suggest double checking that all of your filters and your sump is free of debris/clogs. You may also just want to double check the holes in the upper wash arm and make sure they are not clogged over as well. If they are all fine, then it is likely your pump that is the issue. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Anthony
February 6, 2020
Re: Upper wash arm kit: I installed the upper wash arm upside down. If i pull the arm from the pin and holding washer, will i damage the kit?
For model number KUDM01FKSS0
Hello, Thank you for your question. You should be okay to remove the Wash arm, but ensure you remove all parts as well so nothing is damaged if a screw is missed. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
