This handle end cap kit, also known as a door handle end cap, includes both the upper and lower door handle caps for freezers and fresh food compartment handles. Used in refrigerators and freezers, the end cap covers the rear of the door handles. If your door does not close or open properly, this kit can solve the issue. *Please note: The handle is not included because they must be ordered separately. The only available color is chrome, the rest have been discontinued. Please refer to the diagram provided by the manufacturer for instructions.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ellen B - April 23, 2023
Verified Purchase
Perfect
It fit exactly and took 10 minutes to install
★★★★★
★★★★★
Bessie C - November 12, 2022
Verified Purchase
The handle for my fridge was easy to replace with no problem.
The parts was delivered in a timely manner in good condition.. The were replaced and everything is working to my satisfaction. Thank you.
★★★★★
★★★★★
Richard R - February 13, 2022
Verified Purchase
It worked as expected. That's it.
Very efficient delivery. The actual handle replacement was significantly longer than i needed. Lucky I kept the old one. While the bottom piece was silver colored and would not match what I needed i still used it. No problem.
★★★★★
★★★★★
Ed P - January 8, 2022
Verified Purchase
Exact Fit
Very good customer service and pricing. Thanks.
★★★★★
★★★★★
Thomas D - July 23, 2019
Verified Purchase
Not black its actually Silver
This picture is very deceiving since it looks black on line and is actually made of cheap silver plastic. The order was delayed and it was crushed by a truck and put in another box when I received it. Over all very poor experience. Lets see if I get my refund now!
July 24, 2019
Thank you for your review. I’m sorry to hear that happened. We have contacted you about this and look forward to trying to help you with your issue.
★★★★★
★★★★★
Preston H - July 17, 2019
Verified Purchase
The correct part, but wrong color
the part I received is the correct part, but in the wrong color. It was silver in color and I needed in white.
★★★★★
★★★★★
Francine L - April 3, 2019
Verified Purchase
Endcap kit
The frig endcap kit was perfect for my repair...it was exactly as described.. easy repair.
★★★★★
★★★★★
Slavko P - November 12, 2018
Verified Purchase
Same parts that I needed, minus the color. (Black discountined))
Same parts that were needed to do repair on 20 year old refrigerator door handle except for the color. Black was the original color, but has been discountinued. Chrome is what’s offered now.
★★★★★
★★★★★
David G - November 3, 2018
Verified Purchase
Easy repair
The part was the correct one. Installation very easy with a Phillips head screwdriver.
★★★★★
★★★★★
John F - October 29, 2018
Verified Purchase
Handle rerpair.
Parts fit perfectly and easy to install. Original parts had been glued together for repair but replacement parts seemed well built and worked well.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 9 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
End cap of fridge door had failed
Simple to unscrew and replace parts
Christine from WASHINGTON, DC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The end pieces for the refrigerator door broke
The repair was so easy. All I had to do was take out the screws, and fit the new pieces in. Even though the new pieces were chrome plated plastic (unlike the original metal black ones) you can't tell that they didn't come that way. It makes the refrigerator almost look brand new! When we move out our landlords will definitely have receive
... Read mored an upgrade!
Read less
Jaclyn from Pleasant Grove, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
End Cap on refrigerator handle broke
I unscrewed the top broken end cap and bottom end cap (had to match-up the chrome pieces), attached the handle to both of the new end caps, and using a phillips screw driver, screwed them back on to the refrigerator. Very easy. The blow-up illustration I used to order the part, it was very helpful.
Stephanie from Tucson, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
20 of 26 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bracket on lower door handle broken.
Purchased replacement set of brackets. Unscrewed broken and other brackets. Replaced brackets and handles. Done.
Lesli from Denton, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
10 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
End Cap cracked and broke from age.
Removed the one screw and replaced with new end cap. Only disappointment was the beige color, as I would have preferred a white one. White color was not offered. Other than that it took less than five minutes. I'd rate it 4 stars.
Bonnie J from Nottingham, NH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigeration Door Handle End Cap cracked
The repair was REALLY SIMPLE. I popped off the cap cover from the existing end cap, insert the door handle to the new end cap, screw on the new end cap with a Phillips screw driver, and then push the old cap cover back on. Took less than 10 minutes, if that.
Jon from Brea, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The endcap broke, door handle fell off
Found the model number of my refrigerator, sat down at my computer, went to PartSelect.com, easily found what I needed and ordered it. A couple of days later the part was at my door. With a srewdriver in hand and In less than 5 minutes the repair was complete and good as new. Total cost of repair$15.44. Of coarse I had to charge the wife
... Read more a service call LOL
Read less
Brad from North Mankato, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
10 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Could not properly open the door wirhout the handle
I Clean the handle both top and bottom. I place the cap in place on the bottom of the handle and tap it in snug with a hammer. I then place the top of the handle back into it's original position and then I screwed the end cap in place at the bottom. EASY !!
Kenneth from Neptune, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old door handle bent in a move--Missing
First of all, I looked at the blow apart diagrams on Part Select website. That made it really easy to determine the parts I needed to complete the repair. Once I had received the parts and verified that all had arrived in good order, it took me 5 minutes and a Phillips screwdriver to do the rest.
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wayne
October 3, 2017
Does this kit come in white? If so, what is the part number? Thanks!
For model number ET18NKXFW00
Hi Wayne, Thank you for the question. The kit is only made and sold in Silver. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Doug
May 3, 2018
What type and size screws are required to mount the door handle end cap kit?
For model number ET18NKXFW04
Hello Doug, thank you for your question. You would need two of part number Sheet Metal Screw
Part Number: PS11742729 for the freezer door handle end caps (top and bottom). The fridge handle requires one of Sheet Metal Screw Part Number: PS11742729 and one of Screw with Washer Part Number: PS11742721. I hope this helps!
Was this helpful?
Thank you for voting!
Robert
December 12, 2019
Does this come in white? The one i have is in silver.
Hello Robert, thank you for writing. We will need the model number for your appliance to determine the compatible replacement parts for it. We look forward to hearing back from you!
Was this helpful?
Thank you for voting!
Ronald
April 6, 2023
What I need is the little plastic part of the door handle listed as 2 with a screw part 6 and screw cover 8, I don't see that in the picture labeled 2. Is there a parts store in Seattle WA?
For model number ET18PKXFW01
Hi Ronald,
Thank you for your question. Number 2 in the diagram is the handle end cap kit, part number PS392679. It includes both the upper and lower door handle caps for freezers and fresh food compartment handles. The screws would be sold separately. The part number listed for the screw labeled number 8 is PS11742721, and the part number listed for the screw labeled number 6 is PS11742729. If you have any questions, please let us know. We look forward to hearing from you!
