Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
October 10, 2023
Front right burner does not light all the time, have to light with a match. It sparks but doesn't light, cleaned with a brass brush but didn't help.
For model number SCS3014LSO
Hi John, thank you for your question! When you try to ignite the burner, you can hear a clicking noise and see sparks. But the gas does not ignite. The reason this happens is that the gas supply is partially blocked. Lift the grate off the burners. Take the burner cap off. On the back of the burner, there is a small hole that feeds the gas through the igniter. Sometimes it can get blocked with grease or grime, which stops the gas from igniting. Use a needle to give the hole a good clean. The next step is to check the igniter connections to ensure that they are securely in place. We would recommend checking the spark ignition switch and harness, part number PS11742675. We hope this solves your problem!
