Whirlpool/Whirlpool_Thumb/8VEJ4BYT.gif
See part 9 in the diagram
Replacing your Whirlpool Range Receptacle Kit play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Receptacle Kit

★★★★★
★★★★★
10 Reviews

Rated by 16 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your AEP200VAW1!
 Fits your AEP200VAW1!
PartSelect Number PS389217
Manufacturer Part Number 814399
Manufactured by Whirlpool
You May Also Need?
Product Description

Receptacle Kit Specifications

This assembly of parts is a surface burner receptacle kit, and is used in conjunction with your range. The assembly comes with two wires, two wire nuts, two pieces of heat-shrink tubing, and the receptacle. If your element is not heating, you may need to replace your surface burner receptacle. The function of this part is to connect the surface element to the wire harness. The tools you will need for this installment include a number two square-head screwdriver or a number two Phillips screwdriver, a pair of wire strippers and crimpers, and a heat gun.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Whirlpool, Roper, Estate, Inglis.
Part# 814399 replaces these:
AP3030713, 725224, 814399, 14210242, 814399, 814399VP
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

3 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carlos
April 30, 2018
My oven doesn't heat at all. The clock doesn't work but all of the top elements will burn. What could be the causing this problem. Please help! Thanks
For model number WFC150M0EW0
Hi Carlos, Thank you for your question. There are a few parts that you could check. I would suggest testing your elements and your temperature sensor. You can test all three of those parts with a multi meter. If they are all working then it may be your electronic control board that is the issue. I hope that helps. Good luck with your repair.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Deborah
January 14, 2019
Trouble with burners on stove they will heat up to high when they are set on low.
For model number WFC150M0EB0
Hi Deborah, thank you for your question. Be sure to cut power to your appliance and remove any parts before doing tests. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your element. It should be reading between 0 - 50 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. It could also be your wiring that is the issue but you should see visual damage on that part in most cases. I hope that helps. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Earl
November 17, 2019
Replaced receptacle and stove top burner, burner still doesn't work. What can be the issue?
For model number RF365PXMW1
Hi Earl, the only thing left would likely be the switch for the burner. Thank you for your question and good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Whirlpool Range Receptacle Kit

Replacing your Whirlpool Range Receptacle Kit play video
Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 16 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Stove would not heat up
Cut old wires to receptacle, striped the wires, wire nutted to new receptacle, screwed new receptacle into stove and installed heating element.

Piece of cake, but then again my degree is in electrical engineering so I should be able to handle a couple of wire nuts.
Other Parts Used:
Surface Burner Element - 8 Inch
  • Tim from Pittsford, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
83 of 103 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stove heat was inconsistent and
After turning off the circuit breaker, I removed the elements and pans, raised the top and cut the wires to the receptacle assembly. Stripped the wires, slid on the shrink tubing and applied the wire nuts. I used a hair dryer rather than a match to shrink the tubing. Reinstalled the drip pans and inserted the elements. The instructions were clear and the project was easy. The stove works like new.
Other Parts Used:
Range Surface Element Standard Y-Frame Range Surface Burner
  • Thomas from Longwood, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
44 of 53 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Receptacle burned out, due to short
This was the second repair of the same problem. I realized this time that there was a poor connection between the burner and the receptacle causing a arch, creating extra heat and burning out the receptacle.
All that I had to do was to cut two wires to the existing receptacle assembly and use the wire nuts to connect the new assembly and one philips screw holds it in place...The kit required me to assemble it first and there were four items to put together. No problem....
Other Parts Used:
Surface Burner - 8 Inch - 2600W
  • Rolland from Walla Walla, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
16 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
3 burners had stopped working and drawer glides broke.
Removed the old burners and lifted top assembly. It made it easier to work with the wires by removing the top, easily remove the screws holding the wire harness and ground wire, then slid the top to the right and it came right off. splicing the wires in was very easy and all the parts required were sent with the kits. reassembled stove and it worked like a champ. The drawer was very easy as well the plastic glides were all broken or worn out, and one screw each to replace. like a new oven now, saved at least 300 by not purchasing a new one.
Other Parts Used:
Rear Drawer Glide Front Drawer Glide
  • Tracy from Green Cove Springs, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
11 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
heating element and socket needed to be replaced
It was very easy, the element is held in place by a point that protrudes from the element's frame through a hole in the stove top. This hole is located directly across from the electrical socket your bheating element plugs into, under the stove top. Push the heating element in towards the socket and the heating element can now be lifted up and out of the burner tray. Remove the burner's reflector tray. Remove the single screw securing the elements electrical socket to the stove top. Lift the stove top up and secure. Remove socket and cut wires about 4 inces from the old socket. place shrink wrap over each wire and wire nut new socket to existing wires. place shrink wrap over wire nuts and heat to secure. reverse proceedure and test.
Other Parts Used:
Surface Burner - 8 Inch - 2600W
  • Steve from Mount Carmel, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
10 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
elements would not work at times
simply removed the old elements and receptacles and installed the new ones. The fit was perfect. My range looks new again.
Other Parts Used:
Range Surface Element Drip Bowl - 8 Inch - Black
  • Pedro from kent, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stove burner wouldn't heat
First I disconnected the power, removed the screw that hold the element in place. Then, I pulled the element out and cut the two wires. I connected the two wires with the new element as the instruction provided by Part Select. I put the element back and screwed it in place. I plugged in the power and turned on the burner. It works. It is really easy to repair.
  • DAICHI from Louisville, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned out wires and 2 switches.
Unscrewed the switches and let the switch hang while replacing one wire at a time. Followed instructions on wire replacement. Exact parts, only shaft on 6" switch was too long -- okay, because it is designed to break off a piece on end of shaft, then the knob fit. Everything was perfect.
Other Parts Used:
Infinite Control Switch, 6" Infinite Switch - 8 Inch
  • Douglas from RAEFORD, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
back burner would not heat
removed the heating element then removed the screw that holds the plug in on cut the two wires and reconnect the two wires and put back
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch
  • wayne from whittemore, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Receptacle Assembly Has Burned Out
Remove old receptacle and connected and replace new one. Burner now works perfectly again.
  • ANN from MANITOWOC, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
5.0
Filter By Rating:
  • 5 Stars
    10
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS389217
Manufacturer Part Number: 814399
Brand
Model Number
Description
Whirlpool
4RF302BXEQ1
Range - Freestanding, Electric
Whirlpool
4RF302BXGQ0
Range - Freestanding, Electric
Whirlpool
4RF302BXGQ1
Range - Freestanding, Electric
Whirlpool
4RF302BXKQ0
Range - Freestanding, Electric
Whirlpool
4RF302BXKQ1
Range - Freestanding, Electric
Whirlpool
4RF315PXEQ0
Range - Freestanding, Electric
Whirlpool
4RF315PXGQ0
Range - Freestanding, Electric
Whirlpool
4RF315PXKQ0
Range - Freestanding, Electric
Whirlpool
4RF315PXMQ0
Range - Freestanding, Electric
Maytag
ACR2303MFW4
Range
Whirlpool
ACR2303MFW5
Range - Range
Maytag
ACR4303MFB4
Range
Whirlpool
ACR4303MFB5
Range - Range
Maytag
ACR4303MFS4
Range
Maytag
ACR4303MFW4
Range
Whirlpool
ACR4303MFW5
Range - Range
Maytag
ACR4503SFB4
Range
Maytag
ACR4503SFW4
Range
Amana
AEP200VAW0
Range - 20" ELECTRIC FREESTANDING RANGE
Amana
AEP200VAW1
Range - 20" ELECTRIC FREESTANDING RANGE
Amana
AEP222VAW0
Range - ELECTRIC RANGE
Amana
AEP222VAW1
Range - 20" ELECTRIC FREESTANDING RANGE
Maytag
AEP222VAW3
Range
Maytag
AEP222VAW4
Range
Amana
AER5522VAS0
Range - FREE STANDING - ELECTRIC
Amana
AER5522VAW0
Range - FREE STANDING - ELECTRIC
Amana
AER5522VCS0
Range - FREE STANDING - ELECTRIC
Amana
AER5522VCW0
Range - FREE STANDING - ELECTRIC
Amana
AER5523XAB0
Range - 30" ELECTRIC FREESTANDING RANGE
Amana
AER5523XAQ0
Range - 30" ELECTRIC FREESTANDING RANGE

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service