Whirlpool/Whirlpool_Thumb/8VEJ4BYT.gif
See part 9 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Receptacle Kit

★★★★★
★★★★★
9 Reviews
$ 30.53   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS389217
Manufacturer Part Number 814399
Manufactured by Whirlpool
Product Description

Receptacle Kit Specifications

This assembly of parts is a surface burner receptacle kit, and is used in conjunction with your range. The assembly comes with two wires, two wire nuts, two pieces of heat-shrink tubing, and the receptacle. If your element is not heating, you may need to replace your surface burner receptacle. The function of this part is to connect the surface element to the wire harness. The tools you will need for this installment include a number two square-head screwdriver or a number two Phillips screwdriver, a pair of wire strippers and crimpers, and a heat gun.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Whirlpool, Roper, Estate, Inglis.
Part# 814399 replaces these:
AP3030713, 725224, 814399, 14210242, 814399, 814399VP
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

3 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Carlos
    April 30, 2018
    My oven doesn't heat at all. The clock doesn't work but all of the top elements will burn. What could be the causing this problem. Please help! Thanks
    For model number WFC150M0EW0
    Hi Carlos, Thank you for your question. There are a few parts that you could check. I would suggest testing your elements and your temperature sensor. You can test all three of those parts with a multi meter. If they are all working then it may be your electronic control board that is the issue. I hope that helps. Good luck with your repair.

    5 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Deborah
    January 14, 2019
    Trouble with burners on stove they will heat up to high when they are set on low.
    For model number WFC150M0EB0
    Hi Deborah, thank you for your question. Be sure to cut power to your appliance and remove any parts before doing tests. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your element. It should be reading between 0 - 50 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. It could also be your wiring that is the issue but you should see visual damage on that part in most cases. I hope that helps. Good luck with your repair.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Earl
    November 17, 2019
    Replaced receptacle and stove top burner, burner still doesn't work. What can be the issue?
    For model number RF365PXMW1
    Hi Earl, the only thing left would likely be the switch for the burner. Thank you for your question and good luck with your repair!

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your Whirlpool Range Receptacle Kit

      Customer Repair Stories
       Average Repair Rating: 4.3 / 5.0, 14 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Stove would not heat up
      Cut old wires to receptacle, striped the wires, wire nutted to new receptacle, screwed new receptacle into stove and installed heating element.

      Piece of cake, but then again my degree is in electrical engineering so I should be able to handle a couple of wire nuts.
      • Tim from Pittsford, NY
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WP9761346, 814399
      82 of 102 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Stove heat was inconsistent and
      After turning off the circuit breaker, I removed the elements and pans, raised the top and cut the wires to the receptacle assembly. Stripped the wires, slid on the shrink tubing and applied the wire nuts. I used a hair dryer rather than a match to shrink the tubing. Reinstalled the drip pans and inserted the elements. The instructions were clear and the project was easy. The stove works like new.
      • Thomas from Longwood, FL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WPW10259865, WP660532, 814399
      43 of 51 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Receptacle burned out, due to short
      This was the second repair of the same problem. I realized this time that there was a poor connection between the burner and the receptacle causing a arch, creating extra heat and burning out the receptacle.
      All that I had to do was to cut two wires to the existing receptacle assembly and use the wire nuts to connect the new assembly and one philips screw holds it in place...The kit required me to assemble it first and there were four items to put together. No problem....
      • Rolland from Walla Walla, WA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        814399, WP660533
      15 of 19 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      3 burners had stopped working and drawer glides broke.
      Removed the old burners and lifted top assembly. It made it easier to work with the wires by removing the top, easily remove the screws holding the wire harness and ground wire, then slid the top to the right and it came right off. splicing the wires in was very easy and all the parts required were sent with the kits. reassembled stove and it worked like a champ. The drawer was very easy as well the plastic glides were all broken or worn out, and one screw each to replace. like a new oven now, saved at least 300 by not purchasing a new one.
      • Tracy from Green Cove Springs, FL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        814399, WP8053334, WP3195546
      11 of 14 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      heating element and socket needed to be replaced
      It was very easy, the element is held in place by a point that protrudes from the element's frame through a hole in the stove top. This hole is located directly across from the electrical socket your bheating element plugs into, under the stove top. Push the heating element in towards the socket and the heating element can now be lifted up and out of the burner tray. Remove the burner's reflector tray. Remove the single screw securing the elements electrical socket to the stove top. Lift the stove top up and secure. Remove socket and cut wires about 4 inces from the old socket. place shrink wrap over each wire and wire nut new socket to existing wires. place shrink wrap over wire nuts and heat to secure. reverse proceedure and test.
      • Steve from Mount Carmel, PA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        814399, WP660533
      9 of 12 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      elements would not work at times
      simply removed the old elements and receptacles and installed the new ones. The fit was perfect. My range looks new again.
      • Pedro from kent, WA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      7 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Stove burner wouldn't heat
      First I disconnected the power, removed the screw that hold the element in place. Then, I pulled the element out and cut the two wires. I connected the two wires with the new element as the instruction provided by Part Select. I put the element back and screwed it in place. I plugged in the power and turned on the burner. It works. It is really easy to repair.
      • DAICHI from Louisville, KY
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        814399
      6 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Receptacle Assembly Has Burned Out
      Remove old receptacle and connected and replace new one. Burner now works perfectly again.
      • ANN from MANITOWOC, WI
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        814399
      3 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      back burner would not heat
      removed the heating element then removed the screw that holds the plug in on cut the two wires and reconnect the two wires and put back
      • wayne from whittemore, IA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      3 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      burner plug broken
      Cut wires removed old plug,new plug in wire nuts on.Put heat on shrink tube done.
      Less than 30 min.
      • Norman from Newport, NC
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        814399
      2 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      9 Reviews
      5.0
      Filter By Rating:
      • 5 Stars
        9
      • 4 Stars
        0
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS389217
          Manufacturer Part Number: 814399
          Brand
          Model Number
          Description
          Whirlpool
          4RF302BXEQ1
          Range - Freestanding, Electric
          Whirlpool
          4RF302BXGQ0
          Range - Freestanding, Electric
          Whirlpool
          4RF302BXGQ1
          Range - Freestanding, Electric
          Whirlpool
          4RF302BXKQ0
          Range - Freestanding, Electric
          Whirlpool
          4RF302BXKQ1
          Range - Freestanding, Electric
          Whirlpool
          4RF315PXEQ0
          Range - Freestanding, Electric
          Whirlpool
          4RF315PXGQ0
          Range - Freestanding, Electric
          Whirlpool
          4RF315PXKQ0
          Range - Freestanding, Electric
          Whirlpool
          4RF315PXMQ0
          Range - Freestanding, Electric
          Maytag
          ACR2303MFW4
          Range
          Maytag
          ACR4303MFB4
          Range
          Maytag
          ACR4303MFS4
          Range
          Maytag
          ACR4303MFW4
          Range
          Maytag
          ACR4503SFB4
          Range
          Maytag
          ACR4503SFW4
          Range
          Amana
          AEP200VAW0
          Range - 20" ELECTRIC FREESTANDING RANGE
          Amana
          AEP200VAW1
          Range - 20" ELECTRIC FREESTANDING RANGE
          Amana
          AEP222VAW0
          Range - ELECTRIC RANGE
          Amana
          AEP222VAW1
          Range - 20" ELECTRIC FREESTANDING RANGE
          Maytag
          AEP222VAW3
          Range
          Maytag
          AEP222VAW4
          Range
          Amana
          AER5522VAS0
          Range - FREE STANDING - ELECTRIC
          Amana
          AER5522VAW0
          Range - FREE STANDING - ELECTRIC
          Amana
          AER5522VCS0
          Range - FREE STANDING - ELECTRIC
          Amana
          AER5522VCW0
          Range - FREE STANDING - ELECTRIC
          Amana
          AER5523XAB0
          Range - 30" ELECTRIC FREESTANDING RANGE
          Amana
          AER5523XAQ0
          Range - 30" ELECTRIC FREESTANDING RANGE
          Amana
          AER5523XAW0
          Range - 30" ELECTRIC FREESTANDING RANGE
          Crosley
          CE11000VAV0
          Range - Freestanding, Electric
          Magic Chef
          CER3311XAW0
          Range - 30" ELECTRIC FREESTANDING RANGE

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service