This assembly of parts is a surface burner receptacle kit, and is used in conjunction with your range. The assembly comes with two wires, two wire nuts, two pieces of heat-shrink tubing, and the receptacle. If your element is not heating, you may need to replace your surface burner receptacle. The function of this part is to connect the surface element to the wire harness. The tools you will need for this installment include a number two square-head screwdriver or a number two Phillips screwdriver, a pair of wire strippers and crimpers, and a heat gun.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Richard S - December 4, 2023
Verified Purchase
Stove receptacle replacement
Perfect fit. Thanks so much.
★★★★★
★★★★★
Troy P - October 6, 2021
Verified Purchase
Easy Repair
Part arrived quickly. Instructional video was helpful. Took 10 minutes to repair.
★★★★★
★★★★★
Christopher P - April 29, 2020
Verified Purchase
Relatively straightforward repair, easy with video!
The part arrived exactly as described and the repair was straightforward while following the very helpful video. The only parts that were tricky were:
1) stripping the wires - on my first few tries I ended up cutting into the wire. Got it right eventually without using up all the slack.
2) heat shrink wrapping - I used a lighter and didn't get it to shrink all the way to be snug with the wire. Not sure if it's supposed to be completely snug.
Also bought a new element because the prongs on the old one were corroded. The repair was successful and works great now!
★★★★★
★★★★★
Karen Z - January 23, 2020
Verified Purchase
Great part
easy instalation, work great
★★★★★
★★★★★
Art S - December 31, 2019
Verified Purchase
Easy repair
This part worked as it should. The element now heats up like it should.
★★★★★
★★★★★
Lawrence R - November 22, 2019
Verified Purchase
Great part
The part fit perfectly and I am pleased with how easy it was to get!! I put in a model number and found all I needed.
★★★★★
★★★★★
Paul R - March 28, 2019
Verified Purchase
8" stove eye & connecting receptale
The part was as advertised & easy to install. Great company to do business with. Paul Rogers
★★★★★
★★★★★
Norbert A - March 26, 2019
Verified Purchase
receptacle kit
burner on stove repaired and working
★★★★★
★★★★★
Lois S - August 16, 2018
Verified Purchase
Great part.
Great part. Fitted perfect. Thanks
★★★★★
★★★★★
Lou F - April 13, 2018
Verified Purchase
Repair to burner
The part came quickly after I ordered it at store. The Clerk was very helpful. We received it and fixed the stove in no time flat Thank you
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 18 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven heating coil snapped and would no longer heat.
It was so easy to change this out. Unplugged the stove and removed a couple of screws on mounting plate and pulled out the old heating element. Plugged in the new one and replaced the screws. Problem solved!
Diane from Gillett, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Contacts for burner plugin was burnt
Easy fix. Lift the top of the stove and change the connector. No problem because the parts were exactly what was needed.
Dirty, unused range. Found rusted drip bowls and one element plug that had failed.
Unplugged the range. Cleaned the top of the range using Brillo pad, 1 inch putty knife, vinegar/water, 0000 steel wool. Removed debris and build up under the stove top with the same tools. Connected the receptacle kit per the instructions that came with it, worked very well. Install the new drip pans, cleaned the elements, let everyt
... Read morehing dry, plug it back in and tested. Worked very well.
Removed back plate, replaced infinite switch. Replaced receptacle holder. Took a moment to see how to install wires into the receptacle, no instructions on orientation of wires into the receptacle. Wired receptacle per instructions. Placed receptacle into holder and installed burner. Burner Burner would not lay flat, receptacle longe
... Read morer than original. Removed receptacle from holder, plugged in burner and placed burner into position.
Unscrewed the switches and let the switch hang while replacing one wire at a time. Followed instructions on wire replacement. Exact parts, only shaft on 6" switch was too long -- okay, because it is designed to break off a piece on end of shaft, then the knob fit. Everything was perfect.
Uneven heating of surface burners. Occasional electrical sound (arching) when burner was turned on. Also the burner would heat up and cool down while burner when turned on.
Replaced all heating surface burners. We noticed signs of arching on the front left (large) burner so we replaced that receptacle with a replacement receptacle kit. Very quick and easy install (5-10 mins) using the short part select video on receptacle kit information page.
I followed the directions that came with the receptacle kit very carefully. The most important thing to remember is UNPLUG YOUR RANGE FIRST!!!!!!!! I am an 84 year old great-grandma, and not a electrician , but I found the job very easy and enjoyable!
I had a receptacle melt in front of my eyes. I few questions later PartSelect.com showed me the part I needed and was checking out in less than 10minutes. Part arrived 3 days later and 20 minutes after that it was installed. I'm Amazing!!! No, PartSelect.com is AMAZING!
TROY from YPSILANTI, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner plug broken
Cut wires removed old plug,new plug in wire nuts on.Put heat on shrink tube done. Less than 30 min.
Norman from Newport, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
heating element and socket needed to be replaced
It was very easy, the element is held in place by a point that protrudes from the element's frame through a hole in the stove top. This hole is located directly across from the electrical socket your bheating element plugs into, under the stove top. Push the heating element in towards the socket and the heating element can now be lifted u
... Read morep and out of the burner tray. Remove the burner's reflector tray. Remove the single screw securing the elements electrical socket to the stove top. Lift the stove top up and secure. Remove socket and cut wires about 4 inces from the old socket. place shrink wrap over each wire and wire nut new socket to existing wires. place shrink wrap over wire nuts and heat to secure. reverse proceedure and test.
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carlos
April 30, 2018
My oven doesn't heat at all. The clock doesn't work but all of the top elements will burn. What could be the causing this problem. Please help! Thanks
For model number WFC150M0EW0
Hi Carlos,
Thank you for your question. There are a few parts that you could check. I would suggest testing your elements and your temperature sensor. You can test all three of those parts with a multi meter. If they are all working then it may be your electronic control board that is the issue. I hope that helps. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Deborah
January 14, 2019
Trouble with burners on stove they will heat up to high when they are set on low.
For model number WFC150M0EB0
Hi Deborah, thank you for your question. Be sure to cut power to your appliance and remove any parts before doing tests. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your element. It should be reading between 0 - 50 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. It could also be your wiring that is the issue but you should see visual damage on that part in most cases. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Earl
November 17, 2019
Replaced receptacle and stove top burner, burner still doesn't work. What can be the issue?
For model number RF365PXMW1
Hi Earl, the only thing left would likely be the switch for the burner. Thank you for your question and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Merlin
March 10, 2023
The stove top heating element heats up than it shuts off and than doesn't come back on
For model number Rf303pxkq2
Hi Merlin, thank you for the question. According to our research, there are two sizes of surface elements on the cooktop in this model. If your element size is 8 inches, we recommend checking the infinite switch, part number PS11740775. If this is fine, most likely the burner surface element, part number PS11747315, is faulty and needs to be replaced. Similarly, if your element size is 6 inches, we suggest inspecting the infinite switch, part number PS11740785. If this is fine, most likely the burner surface element, part number PS11753286, is faulty and needs to be replaced. We hope this is helpful!
