Average Repair Rating: 2.2 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The side trim on the glass door needed to be replaced.
After we put the latch pins in, the door was easily lifted off. We placed the door on the table and unscrewed the trim pieces. The new trim pieces went into place after we cleaned the door. We slipped the door back on the oven and removed the hinge pins.
Mary from LARAMIE, WY
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I was trying to remove the oven door so I could clean the glass. Spills had run down between the layers of glass.
This oven probably was manufactured in the '60s when the house was built. The door doesn't just pull off like the newer models. These pins fit into small holes on the oven hinges. I inserted the pins and lifted the door to a 45 degree angle, before pulling the door completely off. Now that turned out to be the easy part. I then proce
... Read moreeded to completely dismantle the door. It actually has 4 glass layers which had to be cleaned individually. The hardest part of all was actually remembering how to put it back together again. I put the door back on just as I had removed it, then took out the pins, and I was finally done! This was not an easy project, BUT the results look great.
Read less
Karen from Oklahoma City, OK
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Beverley
March 12, 2018
I fell on the door and now it won't close. I also cannot lift the door off. Can this be repaired?
For model number RF361PXQ
Hello Beverley, thank you for your question. The hinges are probably bent too far back and need to be replaced. You will want to order the hinges, part number WP8053807. This hinge can be used on either side of the door. To remove the door you will need to remove the oven door by flipping the stoppers on the hinges up and pulling the oven door straight out. Hopefully the door hinges are not bent enough that the door will be able to be removed. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Linda
December 30, 2017
How do you take the door off of the oven to work on putting parts around the glass? My husband took the door apart so we could clean between the glass and now we cannot figure how to put it back together with the door still on the stove?
For model number GR470LXMP0
Hello Linda,
Thanks for your question. Unplug the range. You will need to remove the oven door by flipping the stoppers on the hinges up and pulling the oven door straight out. From there, unscrew the door trim to take it apart. To install it again, line the door up with the hinges and press the stoppers on the hinges down to secure it.
I hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
