Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jan R - April 4, 2019
Verified Purchase
They work fine
Great service,as I ended my order on the phone I went to mailbox there was my order. ????
★★★★★
★★★★★
David L - January 9, 2019
Verified Purchase
??
Spot on??
★★★★★
★★★★★
Vanessa L - December 29, 2018
Verified Purchase
rubber feet
the parts were good shipping a little slow and overpriced it cost more for shipping that the part
★★★★★
★★★★★
Christine B - September 28, 2018
Verified Purchase
They do not fit
They are too small for the cooktop grate t have, which means they fall out and roll around when trying to clean. I came to this website because your site said it had comparable products for jenn air. And it doesn’t. So i would like to return my purchase. Please advise
September 28, 2018
Hello,
Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order and the Adhesive required for the pads, PartSelect Number PS11728058. Hope to hear from you!
★★★★★
★★★★★
PEGGY H - August 3, 2018
Verified Purchase
Burner Grate Pads
Just what we needed! Thank you for providing a stable cooktop for our kitchen!
★★★★★
★★★★★
Tom T - May 19, 2018
Verified Purchase
Easy repair parts worked great !!
My appliance is back in working order.
★★★★★
★★★★★
Jack S - April 21, 2018
Verified Purchase
easy repair-
parts were received promptly.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 10 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Rubber grate pads that protect the range top had worn and were flat.
It didn't. The grate pads (PN# PS389174) were too small for the grate (W10311216) and wouldn't work. (PN# recommended by Whirlpool parts department) The pads were smaller in diameter and shorter. Yes I could have glued them in, but because of the size the pads would be flat in no time. The only thing I could order from KitchenAid was
... Read morethe total grate. I ordered the pads late December, they were backordered. I got them the 1st week of February. I tried getting through to Whirlpool by calling to see if there was something I could reorder, but no luck, couldn't through. Am I unhappy? Oh some, but I handle it. Its not the first time I have been rode hard and put away wet.
Read less
Herbert from LATON, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pads melt and fall out of the burner grate
cleaned out pad area with an awl. then the pads just slide in.
Karen from Palm Desert, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Too much heat caused the turntable to shatter and the table support ring to melt.
Washed the turntable and placed it in the microwave.
remove grate - flip upside down - be sure holes are clean and dry - using toothpick, swab some RTV sealant into the holes and a bit on the pads ... insert pads till they seat - be sure to hold in place till all air is evacuated - wipe excess RTV with paper towel...DONE
joe from des plaines, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner grate pads came off over time and were lost, knob skirt clips had broken
attached grate pads with GE clear silicone caulk (withstands heat) to burners. skirts just snap in.
Been looking for grate pads for 10 years and finally found you site and part # WPL 814323. Wasn't sure that they would fit but couldn't even find new grates so decide to try them --Fit perfect. Kitchen aide stove top gas with round grates. Used the drill to clean out the holes with broken pads still embedded.With clean holes the
... Read more new pads just screwed in like the originals. Thank you very much
Read less
Robert from Rio Rancho, NM
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Missing bumper pads
Original bumper pads NOT glued into the burner grates. Hence they began to disappear during routine use and cleaning. Very simple repair with a little glue this time around. But fairly expensive for a very small part set
Martin from Denver, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
7 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
several grate pads fell out/lost /broke during cleaning
The only real issue was locating the proper adhesive to ensure that the new pads would not fall out. The small insert paper slip in the package noted that a RTV adhesive should be used. After much searching at the home improvement super store, I learned it would be found at an auto supply store. It is black, and is for high temp use. It i
... Read mores available in a small tube for around $2.00. The RTV is usually used to make gaskets for heat/oil exposure in auto repair. I did have trouble removing a broken stub from a pad that had broken off in the hole. I used an awl to get what I could and push the rest into the hole deeper, then insert a new pad with along with the adhesive.
Read less
Sabrina from Mooresville, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
61 of 67 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rubber pads on bottom of grate broke off, grate was scratching stainless steel top
I just put the grate pads in the bottom of the grate. The repair was a snap.
Melissa from The Woodlands, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
13 of 20 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
VG
February 7, 2022
Will these burner grate pads fit my range - KDRS467VSS04? Thank you!
For model number KDRS467VSS04
Hello VG, thank you for your question. We have researched the model you have provided, and we would suggest the Grate pads, part number PS988447. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Maritza
February 28, 2018
Need to know if item # 814465 or 814323 are compatible with my model, these are the rubber feet for the grate on the gas range
For model number FPGH3077RFA
Hi Maritza, Thank you for the question. Unfortunately the rubber feet for these grates are not sold separately from the grates themselves. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robert
July 14, 2021
What is the # for replacement spark ignighters. This KitchenAid glass cooktop is about 18 years old.
For model number kGCT305BBL4
Hi Robert,
Thank you for your question. The part number listed under your model number for the spark electrode is PS11740866. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
I am wondering if this bumper is compatible with the grates for model ksdg950ess
For model number KSDG950ESS
Hi Natalie, thank you for your question. Regrettably your grate feet only come with the grates for your appliance. I hope that helps. Good luck with your repair.
Wondering if these rubber feet are compatible with my KitchenAid dual fuel range? If not, what part number should i be looking for?
For model number KGRS505XSS
Hi Heidi, sadly we could not find the requested parts, I recommend contacting the manufacturer directly. If they can provide you with a part number you can check back to see if we stock the part. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Victor
July 6, 2021
Elkit que tienen cuantas almohadillas trae ya que yo necesito las de todas las regillas y 5 regillas
For model number KGCT366EBL0
Hola Victor, Gracias por la pregunta. Este kit incluye 5 almohadillas. Si necesita más de 5 almohadillas, deberá solicitar otro kit, ya que no se venden individualmente. ¡Esperamos que esto ayude!
Was this helpful?
Thank you for voting!
Dana
February 10, 2022
Do these rubber pads fit my grate?
For model number KGCS166GSS
Hello Dana, thank you for writing. Our research indicates the correct burner grate pads are PartSelect Number PS389247. We hope this helps.
Was this helpful?
Thank you for voting!
Neil
February 16, 2022
Trying to find rubber bumpers for the stove top grates. Kitchenaid has part number for grate only.
For model number YKSDB900ESS1
Hello Neil, thank you for your question. We have researched the model you have provided, and we would suggest the BUMPER, part number FIX12070915. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Looking for grate feet replacement for this model ?
For model number CGDS3065PFH
Hi Randy,
Thank you for your question. There is a grate foot kit listed for Frigidaire gas ranges. It includes the feet and adhesive. The part number listed for it is PS2373826. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Range","title":"Range","url":"/Range-Parts.htm"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/Range-Elements-and-Burners.htm"},{"position":3,"name":"814323","title":"814323","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
