Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Patrick R - March 15, 2018
Verified Purchase
I made it harder than it needed to be
The part was an exact fit replacement, good condition and an easy fix, much to my wife’s disappointment, she was hoping to get a new stove. Tip for other customers, don’t be like me, open the drawer under your stove first to see if you can get to the wiring easily before trying to get to it through the inside of the stove.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Igniter turned red but oven would not light
Remove broiler pan, disconnect wires from igniter to gas safety valve and connection in back corner of stove, under a metal plate held in with one screw. Remove two screws holding igniter in and take it out. With new igniter, cut neutral wire as per instructions with it, attach electrical clips to the wire ends, install the new igniter wi
... Read moreth the two screws, plug in the two wire clips to the safety valve just below the igniter and plug in the plastic clip with both wires going into it over in the corner of the stove, and replace the cover over that connection with the one screw, which you removed at the beginning of this process, and you're done.
Read less
Dwayne from Mesquite, TX
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
15 of 21 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ignitor glowed but did not ignite
took oven base plate out. diconnected ignitor , put new clips on neutral wire as per instructions, inserted new ignitor, put everything back, worked ok.
james from long beach, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
22 of 31 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
November 28, 2017
My boiler only takes 30sec. To have gas turn on and ignite, but bake takes over 2min and 30sec to have gas turn on. Both igniters look to be the same brightness. Any suggestions?
For model number SF365BEYQ1
Hi David,
Thank you for your inquiry. Based on what you described, you will need to replace your oven igniter. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mary
March 28, 2019
My stand alone gas range operates on lp gas. Does this make a difference when ordering a replacement ignitor for the oven?
For model number SF367PEYW4
Hi Mary,
Thank you for your question. No, the replacement igniter will work for both natural gas and liquid propane. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Peter
May 23, 2019
The igniter you show for this KitchenAid wall oven has a much shorter ceramic piece/bar than the igniter in my oven (total length is 5 1/4"). Will your short bar be ok in my wall oven or will your short bar cause your wires to be too exposed to the oven heat?
For model number KGBS246SBL0
Hi Peter, thank you for your question. Anything listed underneath the model number that you got directly from your appliance is guaranteed to be correct because your manufacturer directly advised that it was the correct part. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
