Surface Burner Stabilizer Clip Kit 814103 | Official Whirlpool Part | Fast Shipping | PartSelect
Surface Burner Stabilizer Clip Kit – Part Number: 814103
Surface Burner Stabilizer Clip Kit – Part Number: 814103 Surface Burner Stabilizer Clip Kit – Part Number: 814103 https://partselectcom.azureedge.net/Schematics/Whirlpool/TCQ7ZAKF.gif

Surface Burner Stabilizer Clip Kit

Product Description

Surface Burner Stabilizer Clip Kit Specifications

The surface burner stabilizer keeps your burners level and secure to your gas range. Stabilizers are used to ensure there is a constant burning of the gas-air mixture by the surface burner. If your burner is not producing heat, or not heating evenly, there could be an issue with the stabilizing clip. The clip is made of plastic, and if it is broken or not working properly it should be replaced. This genuine OEM surface burner stabilizer kit is sourced directly from the manufacturer, and comes with everything you need to install the stabilizer clip. This includes the clip, one screw, and one nut.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Element will not heat.

This part works with the following products:

Range, Cooktop, Microwave Oven Combo.

This part works with the following brands:

Whirlpool, Roper, KitchenAid, Kenmore, Estate.

Part # 814103 replaces these:

3148789, 3148790, 3155, 814103, AP2963492.
Questions and Answers
Ask our experts a question on this part and we'll respond as soon as we can.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 8 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Jon from Oakley, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
WPW10196405, WPW10196406, 814103, 330031
Surface elements quit working
Drilled out old and broken hold down clips, installed new ones(4). Cut old wires attached to surface plug in block, striped wires, and attached new plugin kit(4), warmed up heat shrink with a hair dryer, put in new drip bowels, the stove is like new.
I ordered the parts on line early one morning, the next day they were at my door and installed that day, everything that I ordered was there, and fit properly.

Way to go Part Select.com

Jon
230 of 314 people found this instruction helpful.
Was this instruction helpful to you?
Donna from Petaluma, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
Parts Used:
WPW10196405, WPW10196406, 814103
Needed to replace chrome drip bowls and replace one of the hold down clip since previous owner used incorrect drip bowls and put pressure on the hold down clip.
Pulled out the electric element from the range, replaced the new drip bowl on three of the burners and then replaced the electric element pushing it into the hold down clip. On the fourth burner, I removed the electric outlet, the previous incorrect drip bowl and had to drill out the broke off hold down clip that was no longer there. Next I placed the new hold down clip in position, alligned and fed the little screw through the hold down clip. I used a vice grip to hold the nut in place and with a screw driver tighened the nut. I placed the drip bowl in place, attached the electric element and slipped it into the new hold down clip. Everything went smoothly and I experienced an excellent repair job. We received prompt service and had no problems. I just hope the used appliance that we bought works now. It looks great. It is for a rental unit.
210 of 409 people found this instruction helpful.
Was this instruction helpful to you?
Scott from Pleasant Valley, CT
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
814103, WP660533, 330031
Burner was arching or not heating up.
I followed the instructions on removing the existing burner, recepticle, and section of wire. Then followed same instructions for reinstalling above new parts. The instructions were simple and straight forward. The only gluich was that I had to drill out the rivets holding in the old hold down clips. I drilled these out with an 1/8" bit on the burner side off the opening.
12 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Roseanne from North Syracuse, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
814103
replacing the hold down clip for the burner
Started out removing the old clip that didnt hold burner element down anymore. It was a bit rough, since i was taking off a rivet. I used the screwdriver to carefully wedge the edges of the rivet upward so that i could get the wire cutters underneath it enough to snap the head off. After some fanagling for about 20 minutes, i popped it off. The rest of the repair went like cake, and i am soooo thankful that the replacement part i ordered from you included a screw and a nut. Next time, if there is a next time, this repair could be done in 2 minutes. THANK YOU FOR SAVING THANKSGIVING AND A $100 REPAIRMAN SERVICE COST FOR A $10 PART!!!
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Phillip from Pekin, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
814103
old stabilizer clip was broken
I removed surface burner and drip pan from stove. Then drilled out the remaining part of the old stabilizer clip. Once clip was removed I installed the new stabilizer clip with the screw and nut that came with the clip. Then I placed the drip pan back into position and installed the burner and locked it into the new clip.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Robert from Cincinnati, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Parts Used:
814103, WP308180, WP308126
bad element and burner clips were broken
Pulled out the stove and unplugged. Removed the back of the oven and removed the element connections. Removed the two screws holding the element in place and installed the new one.
Removed the remaining parts of the old clips and installed the new ones. Very easy
2 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Joseph from Irmo, SC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
814103
Clips worn/broken
I had to remove the original clips (broken or damaged). This was the hardest part -- the clips were held on by rivets (not screws), so I had to pound/punch them out (using care so not to damage the stove top). Once I punched the rivet out all that remained was a small hole, I just used the small nut and bolt that came with my stablizer clip kit and mounted the new clips. Everything worked out fine.
1 person found this instruction helpful.
Was this instruction helpful to you?
Phillip from Pekin, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
814103, WP660533
Clip was broken, plug in connector end bad on burner
lifted up burner and pulled it free from its connection, then removed drip pan. used my cordless drill to drill out broken stabilizer clip. cleaned up chips from the drill process before installing new clip. installed clip with enclosed screw and nut. I then installed the new burner by lining it up with the connection under the cook top pushed it place and lowered it into the stabilizer clip. Then I turned the burner on to try it out, but I waited for about one hour before turning on the burner because it was cold from being outside.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
2 Reviews
3.5
out of 5
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS389114
Manufacturer Part Number: 814103
Brand
Model Number
Description
Whirlpool
4RF302BXDW0
Range - Freestanding, Electric
Whirlpool
4RF310PXDQ0
Range - Electric
Whirlpool
4RF315PXDQ0
Range - Freestanding, Electric
Whirlpool
4RF315PXDW0
Range - Freestanding, Electric
Kenmore
664RF3020XYN1
Range
Kenmore
664RF3020XYN2
Range
Kenmore
664RF3020XYW0
Range
Kenmore
664RF3020XYW1
Range
Kenmore
664RF3020XYW2
Range
Roper
FEC330BL0
Range - Freestanding 30" Electric, Conventional
Roper
FEC330BW0
Range - Freestanding 30" Electric, Conventional
Roper
FEP310BL0
Range - Freestanding 30" Electric, Conventional
Roper
FEP310BL1
Range - Freestanding 30" Electric, Conventional
Roper
FEP310BW0
Range - Freestanding 30" Electric, Conventional
Roper
FEP310BW1
Range - Freestanding 30" Electric, Conventional
Whirlpool
FEP310YL0
Range
Whirlpool
FEP310YL1
Range
Whirlpool
FEP310YL2
Range
Roper
FEP310YW0
Range - Electric
Roper
FEP310YW1
Range - Electric
Roper
FEP310YW2
Range - Electric
Roper
FEP320BL0
Range - Freestanding, Electric
Roper
FEP320BL1
Range - Freestanding, Electric
Roper
FEP320BW0
Range - Freestanding, Electric
Roper
FEP320BW1
Range - Freestanding, Electric
Whirlpool
FEP320YL0
Range
Whirlpool
FEP320YL1
Range
Whirlpool
FEP320YL2
Range
Roper
FEP320YW0
Range - Freestanding, Electric
Roper
FEP320YW1
Range - Freestanding, Electric