Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
The flat style oven igniter is also known as a range oven igniter. The function of this part is to glow extremely hot in order to ignite the gas for the oven burner. With this flat style oven igniter, you must reuse the original bracket from your original igniter. Be very careful during installation to not touch the black element part of the flat style oven igniter as it is very fragile. If your oven does not heat you should check to see if your igniter is glowing. If your igniter is glowing and the oven is not heating there is a chance that the igniter is not strong enough to heat your oven and it will need to be replaced.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Dolores B - January 26, 2021
Verified Purchase
Part did the job - back to cooking!
Being that the part is so fragile, you did a super job in packing it. Instructions would have been helpful though.
★★★★★
★★★★★
John S - November 22, 2018
Verified Purchase
Better than replacing the oven.
Very easy to install. Two screws and two wire nuts.
★★★★★
★★★★★
Daniel S - August 8, 2018
Verified Purchase
Oven repair
The best part of the deal was the help in troubleshooting. I would never have guessed that the igniter was the cause of the gas valve not working. It was, the new igniter came quickly, and now my oven works again.
★★★★★
★★★★★
Sandra P - November 28, 2018
Verified Purchase
Oven Igniter
Part came within less then a week. Was easy to install.
★★★★★
★★★★★
GLEN E - February 15, 2018
Verified Purchase
Correct Part
Fast shipping , correct part and awesome place to get parts
★★★★★
★★★★★
Jacob K - July 17, 2019
Verified Purchase
Works well - no issues
Ordered, and the part arrived in 2 days. Exact igniter I needed for my old Caloric oven.
★★★★★
★★★★★
CLINTON B B - February 15, 2020
Verified Purchase
Easy repair, great part - Worked as expected
My oven used to take approximately 5 minutes to light!!! Seriously!!! Now it only takes 30 seconds!!! Now that's a serious improvement!!! I'm VERY satisfied!!!
★★★★★
★★★★★
Christopher C - June 6, 2020
Verified Purchase
As expected.
How could this go wrong? The part was received undamaged and working and appears to be in new condition. So really this only could have been 5 or zero stars.
★★★★★
★★★★★
Richard K - December 4, 2021
Verified Purchase
Easy repair and the part works as expected
The part was delivered within 4 days and I was able to fix the oven without calling a technician. I'm sure I saved a couple of hundred for the repair by doing it myself and it was surprisingly simple.
★★★★★
★★★★★
John W - April 18, 2021
Verified Purchase
Part was not available locally, in a 100,000 plus population city.
All is good. Use this company in the future if I need a part.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 35 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven would not light
Removed old ignightor and installed new one
Daniel from NAPERVILLE, IL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
NO Work.
Followed Instructions with part. Easy Install. However the problem not solved. I believe Oven Control defective (Worn Out). Replacement May not be available. Still looking. Thank You. RJC
Robert J. from WESTMINSTER, MD
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old igniter would not light stove
Ceramic connectors were taken off the old igniter, pulled off old igniter and replaced in the same way the new igniter
Carlos from EAST NEWARK, NJ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broiler inoperative
For the third time in less than a year I had to replace the broiler igniter. The range is 27 years old and has given us excellent service. When the igniter failed it's replacement lasted 3 months. The next replacement lasted about 6 months. This last replacement has been in service about 1 week. We shall see. The last one had an open wire
... Read more within the ceramic mould. There was continuity from one wire, through the black portion, but not to the second wire. It seems like it was a fault in manufacturing.
Read less
Donald from East Syracuse, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the iron gets red hot but not enough to open the gas valve.
Took the pan out of the bottom of the oven. Took the screws out of the assembly for the iron, disconnect the power wires under the stove and pull out the old iron. Reverse the proceedure but be careful with the new iron, it is very fragile. Connect the wires put the screws back and you are done. Make sure before you start the job that yo
... Read moreu unplug the appliance !!!!
Read less
Paul from SEWAREN, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broiler Igniter failed
Had to take entire back panel off, to disconnect wiring. Once disconnected, removed two screws holding up igniter in oven. Pulled it through and removed from holder, Be careful new igniter very fragile. Reconnected, put panel back on, then turn on to verify, all went well, fully operational.
Ramon from Little Falls, NJ
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven not turning on
I took out the oven racks. There are 2 cross head screws and 1 screw with a hex head holding the igniter. Pulling out the igniter carefully and the wire nuts also came out. Replaced the wires using the existing wirenuts and slid the igniter into place. Replaced the 3 screws and DONE. Wish the igniters were a little cheaper as this is th
... Read moree third one to go weak. The new one draws about 3.2 amps while the old one only drew 2.85Amps, not enough to open the gas valve. Oven works Fine now. Thanks parts select for the rapid delivery.
Read less
charles from college point, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not light
After the appliance store told me that the repair would cost about $500 to fix an oven that wouldn't light we didn't have the money to repair it or buy a new one so we went without an oven (only the oven) for almost 1 year. The igniter would glow but the oven would not light. my son found your site online and passed it on to me. It was so
... Read more simple it's almost funny. I opened the oven door and removed the burner cover. Then reached in and removed the three screws that held the igniter in place. Turned off the gas, disconedted it so I could pull the stove out to get behind it. Found the wires to the igniter and undid the 2 wire nuts. Removed the igniter cover from the old one and slid it onto the new one. Be very careful because the igniter is very delicate and be sure to not toucjh the heating eliment. Slid the new part into place, reinstalled the screws, connected the new wires with the old wire nuts, reconnected the gas and turned on the oven. BAM it worked like a charm.
Read less
Rick from Laguna HIlls, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
12 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven would not light/get hot.
I slid out the oven burner disconected the old igniter and replaced it with the new one & slid back in place and connected the two wires and I was back in business. The job was relativly an easy one.
gregory from sayreville, NJ
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven does not heat
Daughter and family came to visit Gramps for the weekend; Saturday morning, arose and opened a couple of cans of grand buscuits. Set aside to let rise then turned oven on to preheat. Came back later and oven did not work. Stove top worked, broiler worked, but no oven. What to do, didn't want to waste dough; perhaps salvage for dumplings,
... Read more no; make poorboy doughnuts, no; Aha, lets use the outside gas grill, never done it, worth the try, remember old camping days except using gas. Worked like a charm, crisis over. Now back to oven. Since everything worked except the oven burner problem could be in the igniter, or oven control. Removed covers to burner assembly, pulled igniter, checked for continuity across the two leads. No go. Wait, need to check oven control, placed voltmeter across incomming leads, turned oven controls on and had voltage. Conclusion, igniter bad. Also noticed a small rust hole in the burner tube next to igniter, not good. Went on-line to PartsSelect, entered make and model number. No model but gave choice close to model. Viewed pictures, found one that came close. Placed order. Parts came in a very short time. Matched new parts to old. perfect. Removed burner tube and installed new one, one screw, simple. Wire nut the incomming leads to igniter and install, three screws, simple. Turned oven on, igniter glows bright, gas comes on, good blue flame, no need to adjust air inlet vents on burner tube. Turned off oven, replaced covers, then turned on oven, baked cornbread and enjoyed. Thanks, back in business. Dave
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
November 2, 2017
Is there a way to test the flat style oven igniter before replacing it? Whirlpool oven does not come on.
For model number SF378PEWN0
Hi Mark, Thank you for the question.The oven igniter should have a resistance reading of 3.2 to 3.6 ohms. If the igniter ohms are good,you can check the resistance of the oven safety valve. The gas valve should have 1.5 ohms of resistance. If the gas valve is good, the oven thermostat should be checked,It should read approximately 1080 – 1090 ohms at room temperature.The igniter requires 120vac to operate. If all other parts check out but the igniter is not getting 120vac you may need to replace the control board. Hope this helps!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
January 1, 2018
I have a Caloric wall oven after 10 min it fails to stay lit . Igniter still glows red hot could this be a bad igniter
For model number rw212
Hello Dave, Thank you for your inquiry. This is one of the parts it could be, I would also check the gas valve, the electric control and the temperature sensor. I have included a link to a video on troubleshooting this symptom. Hope this helps!
https://www.partselect.com/Repair/Range-Stove-Oven/Gas-Igniter-Will-Not-Light/
5 people found this helpful.
Was this helpful?
Thank you for voting!
Rogelio
June 4, 2022
igniter glows but fire will not ligth
For model number RWD 212
Hello Rogelio, Thank you for your inquiry. If the igniter is glowing but not lighting the gas, it may not be drawing enough power to light the gas, in which case you should replace it. You can test it with a multimeter. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Brandon
November 25, 2017
Is this part covered by a warranty?
Hi Brandon,
Thank you for your question. We have a 1 year warranty on all parts purchased with our company. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robert
October 17, 2019
Our Caloric oven will not light. I want to replace the igniter but i think the model number is rsr363 but i cannot find this on various parts lists.
For model number rsr363
Hello Robert, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS387058. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mark
June 29, 2021
igniter glows red/orange the gas tube lights but the oven heats slowly with a smell of gas. All gas connections are tight . Once in a while the oven operates efficiently.
For model number ARGS7650WW
Hi Mark,
Thank you for your question. If you are smelling gas during the pre-heating stage, what you are smelling could be odorant. Odorant is an additive that is added to natural gas and propane and it is normal to smell this when the oven is pre-heating. Depending on how much of the odorant was added to the gas by your supply company, the smell can vary from low to strong. If what you are experiencing is a gas smell, then you may have a weak igniter and it will need to be replaced. If what you are experiencing is a rotten egg smell, then you need to turn the power and gas supply off to the oven, ventilate your home by opening the windows, leave the house and contact the company who supplies your gas. We hope this helps! Good luck with the repair!
Was this helpful?
Thank you for voting!
Erik
December 11, 2018
What is the size of the wire on the part? I have to replace one of the ceramic wire nuts and i would like to be sure of the wire size. The part that i ordered does not come with replacement ceramic wire nuts.
Hello Erik, Thank you for the question. Very sorry but we do not have the dimensions for the wire. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. Hope this helps!
Was this helpful?
Thank you for voting!
Lou
November 11, 2017
Bough igniter and install it. Still does not work. This a modern maid build in double oven about 26 year old ... the bottom oven works but not the top one ...the does not come on.do you have any ideal what it may be? the model # was hard to make out...
For model number phu202uk
Hi Lou,
Thank you for your inquiry. If your upper oven is not working, you will need to check the oven igniter. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
