See part 25 in the diagram
( Grid squares measure 1x1 inch )
Flat Style Oven Igniter
$
58.90
In Stock
In Stock
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS387058
Manufacturer Part Number 786324
Manufactured by
Whirlpool
Product Description
Flat Style Oven Igniter Specifications
The flat style oven igniter is also known as a range oven igniter. The function of this part is to glow extremely hot in order to ignite the gas for the oven burner. With this flat style oven igniter, you must reuse the original bracket from your original igniter. Be very careful during installation to not touch the black element part of the flat style oven igniter as it is very fragile. If your oven does not heat you should check to see if your igniter is glowing. If your igniter is glowing and the oven is not heating there is a chance that the igniter is not strong enough to heat your oven and it will need to be replaced.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Gas igniter glows | but will not light | Will Not Start | Little to no heat when baking
This part works with the following products:
Range, Wall Oven, Cooktop, Microwave Oven Combo.
This part works with the following products:
Amana, Caloric, Whirlpool, Maytag.
Part# 786324 replaces these:
AP2934763, 1191, 786324, 0309145, 0062766, 0063148, 0064395, 0064446, 0064671, 0068025, 0068026, 0068043, 0087699, 0308103, 0309145, 0309157, 0309158, 0309159, 14210904, 31939901
... Show more
, 4157300, 4179150, 4315139, 4363426, 786324, 786659, 786660, 87699, R0710104, R0710221, Y0062766, Y0063148, Y0064395, Y0064446, Y0064671, Y0068025, Y0068026, Y0068043, Y0087699, Y0308103, Y0309145, Y0309157, Y0309158, Y0309159, Y87699
Show less
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
November 2, 2017
Is there a way to test the flat style oven igniter before replacing it? Whirlpool oven does not come on.
For model number SF378PEWN0
Hi Mark, Thank you for the question.The oven igniter should have a resistance reading of 3.2 to 3.6 ohms. If the igniter ohms are good,you can check the resistance of the oven safety valve. The gas valve should have 1.5 ohms of resistance. If the gas valve is good, the oven thermostat should be checked,It should read approximately 1080 – 1090 ohms at room temperature.The igniter requires 120vac to operate. If all other parts check out but the igniter is not getting 120vac you may need to replace the control board. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
January 1, 2018
I have a Caloric wall oven after 10 min it fails to stay lit . Igniter still glows red hot could this be a bad igniter
For model number rw212
Hello Dave, Thank you for your inquiry. This is one of the parts it could be, I would also check the gas valve, the electric control and the temperature sensor. I have included a link to a video on troubleshooting this symptom. Hope this helps!
https://www.partselect.com/Repair/Range-Stove-Oven/Gas-Igniter-Will-Not-Light/
3 people found this helpful.
Was this helpful?
Thank you for voting!
Brandon
November 25, 2017
Is this part covered by a warranty?
Hi Brandon,
Thank you for your question. We have a 1 year warranty on all parts purchased with our company. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robert
October 17, 2019
Our Caloric oven will not light. I want to replace the igniter but i think the model number is rsr363 but i cannot find this on various parts lists.
For model number rsr363
Hello Robert, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS387058. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Erik
December 11, 2018
What is the size of the wire on the part? I have to replace one of the ceramic wire nuts and i would like to be sure of the wire size. The part that i ordered does not come with replacement ceramic wire nuts.
Hello Erik, Thank you for the question. Very sorry but we do not have the dimensions for the wire. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. Hope this helps!
Was this helpful?
Thank you for voting!
Lou
November 11, 2017
Bough igniter and install it. Still does not work. This a modern maid build in double oven about 26 year old ... the bottom oven works but not the top one ...the does not come on.do you have any ideal what it may be? the model # was hard to make out...
For model number phu202uk
Hi Lou,
Thank you for your inquiry. If your upper oven is not working, you will need to check the oven igniter. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 35 reviews.
What's this?
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven wouldn't heat. Glow ignitor was weak and wouldn't ignite flame.
After shutting off the gas and removing the oven door, which simply slid off of the hinges, I removed the oven plate. The ignitor was attached to the manifold. I removed that and noted the wires were attached back behind a hole in the back of the oven. I thought I would have to access them from the back but when I pulled on them I was able to reach them from the front. I was surprised to find plastic lugs covering the wire ends, rather than ceramic. I attached the new ignitor wires and reused the plastic lugs, as no ceramic ones came with the new ignitor. I carefully slid the new ignitor back into the cage/shield attached to the manifold and replaced the manifold. I then turned the gas back on and tested the ignitor (which worked perfectly) before replacing the oven plate. The repair took less than 30 minutes, but my wife and I thoroughly cleaned the door and interior while we had it apart. The hardest part was getting the door back on the hinges, but this too was accomplished after several attempts. The oven heats up beautifully now.
-
John from Niles, MI -
Difficulty Level:Easy -
Total Repair Time:15 - 30 mins -
Tools:Screw drivers -
Parts Used:786324
78 of 82 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Amana oven & broiler igniters failed after 7+ years of service
Broiler Igniter:
Disconnected stove from electricity
Removed the two screws that hold the broiler igniter assembly
Pulled asembly out to expose ceramic wire nuts
Removed ceramic wire nuts and save them
Removed broiler igniter assembly (broiler igniter & brolier mounting bracket are assembled together)
Loosened screws/nuts that hold the broiler igniter to the brolier mounting bracket
Remove old broiler igniter
Carefully inserted new brolier igniter into the broiler igniter bracket
Place the brolier igniter bracket into position. Make sure you look at the diagram provided so the position is correct. There is a "up" & "down" side to the broiler igniter
Tightened screws & bolts on broiler igniter bracket
Reconnected the ceramic wire nuts
Inserted two mounting screws and tightened
Finished.
Oven Igniter:
Removed oven door
Removed bottom oven drawer
Removed nut that holds heat shield/disperser in place
Removedheat shield/disperser
Removed all oven tray screws
removed oven burner
disconnected oven igniter
disconneted oven igniter assembly
inserted new oven igniter
reassembled
Disconnected stove from electricity
Removed the two screws that hold the broiler igniter assembly
Pulled asembly out to expose ceramic wire nuts
Removed ceramic wire nuts and save them
Removed broiler igniter assembly (broiler igniter & brolier mounting bracket are assembled together)
Loosened screws/nuts that hold the broiler igniter to the brolier mounting bracket
Remove old broiler igniter
Carefully inserted new brolier igniter into the broiler igniter bracket
Place the brolier igniter bracket into position. Make sure you look at the diagram provided so the position is correct. There is a "up" & "down" side to the broiler igniter
Tightened screws & bolts on broiler igniter bracket
Reconnected the ceramic wire nuts
Inserted two mounting screws and tightened
Finished.
Oven Igniter:
Removed oven door
Removed bottom oven drawer
Removed nut that holds heat shield/disperser in place
Removedheat shield/disperser
Removed all oven tray screws
removed oven burner
disconnected oven igniter
disconneted oven igniter assembly
inserted new oven igniter
reassembled
-
Mark from Munroe Falls, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
-
27 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not light
After the appliance store told me that the repair would cost about $500 to fix an oven that wouldn't light we didn't have the money to repair it or buy a new one so we went without an oven (only the oven) for almost 1 year. The igniter would glow but the oven would not light. my son found your site online and passed it on to me. It was so simple it's almost funny. I opened the oven door and removed the burner cover. Then reached in and removed the three screws that held the igniter in place. Turned off the gas, disconedted it so I could pull the stove out to get behind it. Found the wires to the igniter and undid the 2 wire nuts. Removed the igniter cover from the old one and slid it onto the new one. Be very careful because the igniter is very delicate and be sure to not toucjh the heating eliment. Slid the new part into place, reinstalled the screws, connected the new wires with the old wire nuts, reconnected the gas and turned on the oven. BAM it worked like a charm.
-
Rick from Laguna HIlls, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
-
Parts Used:786324
11 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven ignitor stopped working (does this every 6-7 years)
First we removed the oven doors. Then removed the shelf that separates the oven from the broiler, giving us more room to work. At first we thought we needed to loosen the screws around the bracket holding the ignitor, but we realized that the burner needed to be removed. Lifting the burner up from the front gave us the room to pull it gently from the back of the oven wall, giving more room to pull the wires connected to the ignitor from the back of the oven wall out and then disconnecting them. Then carefully pulling the ignitor out of the bracket.
Putting the new ignitor in was easy. Carefully sliding it into the bracket, not touching the ceramic piece, connected the electric wires, pushed the wires back into the hole in the back of the oven. Then placing the burner back into place.
We then turned on the gas and the electricity and the ignitor glowed and the burner lit. PERFECT! In the past we've had a repair man come in and this time we saved $100. Even more perfect.
Putting the new ignitor in was easy. Carefully sliding it into the bracket, not touching the ceramic piece, connected the electric wires, pushed the wires back into the hole in the back of the oven. Then placing the burner back into place.
We then turned on the gas and the electricity and the ignitor glowed and the burner lit. PERFECT! In the past we've had a repair man come in and this time we saved $100. Even more perfect.
-
Jean from Manalapan, NJ
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:
-
Parts Used:786324
11 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
my oven took for ever to light after a while it didn't
i disconnected the power supply, took all shelves out of oven, removed screw that holds the bunner to oven, removed bunner along with igniter. cut wires to igniter wired new igniter , tested before
installing bunner,( ok) installed bunner and screw
fired up and all is well.
installing bunner,( ok) installed bunner and screw
fired up and all is well.
-
joseph from wyandotte, MI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
-
Parts Used:786324
7 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't heat up, but everything else worked, broiler and gass range
was so each, we removed the door and the racks. and the bottom drawer out. All we had to do was remove the ignitor that was held in wtih screws we could read the wires from the bottom of the oven and then put the new one in and attached the wires from the bottom. We had read reviews of others that did the same repair and were confident that we could do it because they described it and said it was so easy. Thanks everyone.
-
Angela from carol stream, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
-
Parts Used:786324
7 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broiler Igniter failed
Had to take entire back panel off, to disconnect wiring. Once disconnected, removed two screws holding up igniter in oven. Pulled it through and removed from holder, Be careful new igniter very fragile. Reconnected, put panel back on, then turn on to verify, all went well, fully operational.
-
Ramon from Little Falls, NJ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
-
Parts Used:786324
5 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
switches knobs and igniter replaced
Very easy, I just hope appliance has more life in it to justify repairing it.
-
steve from penngrove, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
-
5 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stove would heat up but smelled gassy after cycling
Repair can be done through the oven after removing the dip pan on top of the oven burner. The drip pan slids out - no tools needed. Remove 1 screw that holds the element close to the burner and 2 screws that hold the element cover to the stove. Remove bottom drawer and remove wire nuts from element wires. Reverse the process to install new element. Care must be taken to avoid damage to the element as it can be easily broken. I cut and stripped the wires coming from the stove valve as they were not in good shape after removing the wire nut.
-
Paul from Ham Lake, MN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
-
Parts Used:786324
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat
i read other stories and found after checking rotating heat switch with ohm meter found the igniter was the problem, pulled up on door and it came off, found bottom of oven pulled up and out, removed wing nut from deflector and two bolts and one wiring connector, just reversed removal to install new igniter and all complete, took about 20 minutes,
-
michael from WILLITS, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
-
Parts Used:786324
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Christina S - December 21, 2018
thanks for having it!
The part was exact and in good condition the part tested as working
Sandra P - November 28, 2018
Oven Igniter
Part came within less then a week. Was easy to install.
John S - November 22, 2018
Better than replacing the oven.
Very easy to install. Two screws and two wire nuts.
Sabrina R - October 30, 2018
Part has been broken 2 times now
I have received this part broken 2 times now. Subpar packaging however customer service has been wonderful with replacement of the part. Hopefully when I receive my 3rd part it isn’t shattered to bits once again. I’ve been out an oven for over a month now. Not sure if they are cheap china parts or what but it is getting quite frustrating.
Taylor C - October 2, 2018
Works great
Great piece, works wonderfully, took awhile to find an instructions video online.
Michael M - August 29, 2018
Easy repair.
The part arrived broken. Waiting for a replacement took another week.
Daniel S - August 8, 2018
Oven repair
The best part of the deal was the help in troubleshooting. I would never have guessed that the igniter was the cause of the gas valve not working. It was, the new igniter came quickly, and now my oven works again.
Bill S - June 2, 2018
Fragile igniter, needs better packaging
I was disappointed that the shipping packaging was inadequate and my first igniter arrived broken. This is a fragile product, so it should have been better protected. The cardboard sleeve with cutout was evidently not up to the rigors of the shipping and handling process. Thankfully, PartSelect Customer Service was able to ship me a replacement, but had to process as a new order (kind of surprising in this day & age of computerized records).The second igniter arrived intact and I was able to install it without much difficulty other than the physical contortions of accessing the mounting point in our Caloric oven with broiler. This is the second time I've replaced an igniter in this oven, but that's a lot cheaper than buying a new oven and keeps stuff out of the landfill. I think the previous (identical) one lasted 7 years or so. I miss the simplicity of a pilot light, but I guess it's safer and wastes less gas. I like fixing things, but it reminds me why I'm not a full-time appliance repair person. :-) I greatly appreciate PartSelect--especially when there are helpful videos.
Gary U - March 6, 2018
Experiment repair
Unfortunately the new igniter did not work, most likely another issue altogether. Delivery was fast and installation was fairly easy. Unit is 24 years old. Time for a new one!
GLEN E - February 15, 2018
Correct Part
Fast shipping , correct part and awesome place to get parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS387058
Manufacturer Part Number: 786324
Manufacturer Part Number: 786324
Brand
Model Number
Description
Amana
AGDS902SS-P1131828NSS
Range
- Amana Range/Stove/Oven Model AGDS902SS-P1131828NSS (AGDS902SSP1131828NSS, AGDS902SS P1131828NSS) Parts
Amana
AGDS902SS-P1131831NSS
Range
- Amana Range/Stove/Oven Model AGDS902SS-P1131831NSS (AGDS902SSP1131831NSS, AGDS902SS P1131831NSS) Parts
Amana
AGDS902SS-P1131833NSS
Range
- Amana Range/Stove/Oven Model AGDS902SS-P1131833NSS (AGDS902SSP1131833NSS, AGDS902SS P1131833NSS) Parts
Amana
AGDS902WW-P1131828NWW
Range
- Amana Range/Stove/Oven Model AGDS902WW-P1131828NWW (AGDS902WWP1131828NWW, AGDS902WW P1131828NWW) Parts
Amana
AGDS902WW-P1131831NWW
Range
- Amana Range/Stove/Oven Model AGDS902WW-P1131831NWW (AGDS902WWP1131831NWW, AGDS902WW P1131831NWW) Parts