Hi, what would you recommend for black touch up paint for a Kenmore side by side fridge, elite trio24.8 cu ft., black finish. Thanks
For model number 463677609
Thank you for your question. The black touch up paint we suggest is under part PS11727841 for your model. We hope this helps.
Was this helpful?
Thank you for voting!
June 7, 2019
Why would water be running out of the ice maker on every cycle? I have the ice maker out but there is nothing obvious except some of the black paint is coming out of where the water fills into
For model number ET18HMXXW00
Hi Mike, thank you for your question. There are two parts that you should check for this issue. The first part to test would be your water inlet valve. The valve has two solenoids that control either the dispenser or the ice maker. Even if your dispenser is working the ice maker solenoid may not be and vise versa. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is testing correctly then you should look into your ice maker being the issue. I hope that helps. Good luck with your repair.