Door Spring Assembly with Adjusting Hook 675611

Hi Roger, Thank you for your inquiry. Yes, these springs will work on your dishwasher. I hope this helps. Thank you and have a great day!

Hi Ira, Thank you for the question. Here is a repair story left on the site from a previous customer on how they installed the spring. " Open door part way and flex the plastic hinge 'pins' on the kick plate out of the door itself. Once these are out you can close the door and lay the kick plate down towards you. This will expose a spring that is attached to pins on either side of the kick plate and held in place by a rubber cap. Remove the cap, pull the loop of the spring off the pin, and repeat for the other side. At this point you can remove the kick plate and set aside out of the way. There is a second plate behind the kick plate held in place by four screws. Remove the screws with a Phillips head screw driver or a 1/4 inch wrench or socket, then remove the plate and set aside. Now you have exposed the frame rails that somewhat hide the springs, one on each side." Hope this helps!