Quick Question!

Have you ever purchased from PartSelect.com before?

373087-1-S-Whirlpool-4392065           -Maintenance Kit
373087-1-S-Whirlpool-4392065           -Maintenance Kit 373087-2-S-Whirlpool-4392065           -Maintenance Kit 373087-3-S-Whirlpool-4392065           -Maintenance Kit https://www.partselect.com/Schematics/Whirlpool/BJVPXWJX.gif

Maintenance Kit

Your Price

$42.85
Order within the next 3 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS373087
Manufacturer Part Number 4392065
Manufactured by Whirlpool

This maintenance kit or dry repair kit is used for dryers. The kit includes the drum belt, drum support rollers, one idler pulley, four tri-rings, and one clip. If your dryer is making loud, squeaking, and squealing noises while the drum is turning, or the drum has stopped turning, using this maintenance kit is the solution. The tools needed for this installation project are: putty knife, Phillips screwdriver, 5/16 nut driver, and a small flat blade screw driver. This kit can be used for gas and electric dryers. Remember to unplug the dryer from the power source before beginning this project.

This part works with the following brands: Whirlpool, Kenmore, Roper, Estate, KitchenAid, Inglis, Crosley, Maytag, Amana, Admiral, Magic Chef.

This part works with the following products: Dryer, Washer.

This part fixes the following symptoms:

  • Noisy.
  • Will not tumble.
  • Will Not Start.
  • No heat or not enough heat.
  • Marks left on clothes.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Multi Rib Belt - 92-1/4"

Part Number 346995

This multi rib belt is an important part in your dryer, it is what helps rotate the drum. The belt attaches to the drum, idler pulley, and motor pulley. As the armature of the motor rotates, the belt begins to move and turns the drum. If you notice the drum of your dryer is not spinning during the dry cycle, but you hear the motor running, your belt may have snapped and it will need to be replaced. This belt features four ribs and three grooves, however it replaces a wide variety of belts including wider styles that had five ribs and four grooves. When installing this part make sure the grooves are facing down, against the drum. This replacement part is 92 1/4 inches in length, and 1/4 inch wide. Before you begin any repair work, make sure your dryer has been unplugged.

Order within the next 3 hrs and your part ships today!
$14.56
In Stock

Rear Drum Support Roller Kit

Part Number 347627

The drum support roller kit allows the dryer to tumble properly by supporting the drum cylinder. The kit includes two drum rollers, four tri-rings and one palnut (or retaining washer). The kit does not include a belt or idler pulley and rollers are not sold individually. The drum support roller kit may need to be replaced if the dryer is noisy or will not tumble. The tools needed to complete this repair are a putty knife, Phillips screw driver, and a 5/16 nut driver. It is recommended to look at the rear felt before reassembling the dryer to ensure there are no gaps or damage. This is an OEM part sourced directly from the manufacturer.

Order within the next 3 hrs and your part ships today!
$12.47
In Stock

Idler Pulley Assembly

Part Number 11743765

This part provides the tension required for a multi-ribbed belt. It also serves to help the belt to rotate the drum and attaches to the idler pulley wheel. If your dryer will not start or tumble, takes too long to dry, or is noisy during operation, you may need to replace the idler pulley assembly. Make sure to disconnect power before installing this part, and work gloves are recommended to protect your hands. While the dryer is disassembled for this repair, consider replacing the drive belt as well. You will need a putty knife, a Phillips screwdriver and a 5/16 nut driver for this repair.

Order within the next 3 hrs and your part ships today!
$10.04
In Stock

Tri Ring

Part Number 11755850

If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pulley shaft, or on the rear drum roller shaft. In either case, you will need to remove the front panel of the dryer and the drum to access the part for repair. Once you have accessed the damaged tri ring, you will simply need to slip it off and replace it with the new one. This part is sold individually. Be sure to disconnect the power source from the dryer before you begin this repair.

Order within the next 3 hrs and your part ships today!
$5.76
In Stock

Support Roller Clip

Part Number 11746832

Sold Individually.

Order within the next 3 hrs and your part ships today!
$2.96
In Stock

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful

Question:

My dryer is super noisy and the drum seems to be lacking stability and I’m looking to completely overhaul it. Is this the kit I would need to do that?

Elsa
Answer:

Hi Elsa, this dryer repair kit 4392065 will work with your model. The belt will be just shy of 0.25 inches shorter than your belt, and will have 4 instead of 5 grooves. We suggest using turbine oil on the rollers, shafts, and idler pulley (just a few drops). This will help situate the parts, and should give them a longer life span. Best of luck with this repair.

5 people found this helpful.
Question:

Will this stop the screeching noises

Basem
Answer:

Hello Basem, this dryer maintenance kit 4392065 includes everything you need to get rid of the squeaking noise. Please let us know if you have any further questions.

2 people found this helpful.

Most Recent

Question:

Is there a video on how the belt loops around the idler and pulleys or how to properly install the belt?

Bill for model number LEQ8000JQ1
Answer:

Hi Bill, Thank you for your inquiry. Yes, we have a video on how you install this kit: http://www.partselect.com/PS373087-Whirlpool-4392065-Maintenance-Kit.htm#RepairVideo . It is right underneath the part information. Good luck with your repair.

Question:

The power on my dryer comes on but it will not run. Will this fix the problem?

Heather for model number WED6400SW1
Answer:

Hi Heather, Thank you for your inquiry. I would actually suggest checked your door switch and your thermistor to see if either of those parts are malfunctioning. If anything in the maintenance kit was not working, you would either hear it squeaking or have a burning rubber smell. You can test your door switch and your thermistor with a multi-meter to see if either of those parts are not working. Good luck with your repair.

Question:

I know depending on the model dryer they have different number of rollers. This kit only has 2 rollers do I need to buy extra or does it come with everything I need?

Sara
Answer:

Hi Sara, this repair kit will work for your model and you do not need to purchase extra rollers, it comes with enough. The video above should give you a brief overview of how to install the parts, however they may look slightly different for your model. I hope this helps.

2 people found this helpful.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.5 / 5.0, 55 reviews What's this?
1-15 of 55
 

235 of 257 people found this instruction helpful

Parts Used:
  • Maintenance Kit
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Nutdriver, Screw drivers
Customer: DENNIS from ALTOONA, FL

Broken drive belt

Grow a second set of hands. Always unplug any appliance. Remove lint screen. remove two screws (philips Head). I took a wooden shim lightly tapped w/hammer to pop front of dryer top free. Mine worked on hinges and just flipped back til it rested against the wall. Removed two 5/16 screws inside holding face on carefully raise face section off the support clips at either side on the bottom. Pull drum out (I have the large style drum commercial size [approx.). Clean the inside free of all lint (known to be fire hazard). Sling new belt around drum. Get newly grown set of hands to hold drum in place. Pinch belt to fit between tensioner, lift tensioner and place belt around motor pulley. Spin drum couple times to make certain belt isn't twisted. Reverse dismantle proccess to put back together. Replace all parts that come with kit, you'll feel better knowing you got a new dryer, almost.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

62 of 69 people found this instruction helpful

Parts Used:
  • Maintenance Kit
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Nutdriver, Screw drivers, Wrench (Adjustable)
Customer: Michael from Haines City, FL

Dryer making extra noise while running

1st Unpluged power.
2nd removed two screws under lint screen cover.
3rd poped up lid with flathead screwdryer, then removed (2) 5/16 screws from door cover and unpluged lid switch, lifted up dryer door pannel
4th removed drum
5th took out plastic triangle wheel rings
6th removed old belt guild (to motor pully)
7th removed old wheels and plastic rings stops
8th cleaned excessive hair dust with shopvac
9th put new replaicment part in dryer. made sure to turn manually to make sure belt was lined up properly, then put all dryer peices back.
10th aditional work, took back cover off and removed the (4) 1/4 screws for lint screen case (left side in dryer) vacumed out any excessive dirt lint ect, also cleaned any excessive dust I found in back of dryer, dryer , exhaust ect, and put all back together.
JUst like a new dryer aain after all PM was complete.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

60 of 81 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Pliers, Socket set
Customer: Herbert from Holley, NY

No heat,thumping when running

Removed front panel, drum,replaced belt,tensioner and worn rollers. Then removed rear panel and replaced heating element and high limit thermostat. While I was there completely cleaned inside of dryer. Repair and replacement of parts was quite easy. Just take your time and don't hurry it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

48 of 57 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: Matthew from East Islip, NY

Drum stopped turning on dryer

Great! Spent about $36.00 and I ended up with a overhauled dryer. I ended up cleaning the whole thing out, it's amazing how much stuff accummulates in the frame of a dryer, I also found about $2.00 in change. It's a good idea to clean out a dryer every few years and the broken belt forced me to do it.
But anyway the parts cam very quick and had easy to follow directions.
I would reccomend part select. Matt

Help other customers find the most helpful instructions.

Were these instructions helpful?   

28 of 32 people found this instruction helpful

Parts Used:
  • Maintenance Kit
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers, Wrench set
Customer: Clifford from Mastic, NY

Dryer stopped tumbling

Pryed the top off the dryer, unplugged the door switch, took the screws out of the front panel, then lifted the drum out. Placed the new belt around the drum and while my wife held it in place and steadied it, I reached underneath and looped the belt through (as per instructions), reassembled and back in business! Reaching under the drum was not that easy....VERY tight space to work in and there was no way I could get both hands through, I almost gave up, but one last try and a couple of good grunts, and it popped into place. Getting the wires back on the door switch was a bit of an ordeal too. Took about 30 mins. but still worth it. I'm sure I saved at least a $100 repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

25 of 26 people found this instruction helpful

Parts Used:
  • Maintenance Kit
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers
Customer: Jesus E from Palm Bay, FL

Dryer makes a lot of noice, bad rolleres

super fast shipping, got the part in two days, and had it done in 15-20 min, remove the front pannel, remove the belt and tenssioner,took the drum out , took the old rollers , lubed the shafts,replaced the old rollers with the new ones, intalled the drum back, the tenssioner and the new belt, reinstalled the front pannel, and done...easy and fast job, like new dryer, works nice...save some money...the new one will do the same..just dry the clothes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

17 of 18 people found this instruction helpful

Parts Used:
  • Maintenance Kit
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Shawn from Akron, OH

Dyer drum doesnt turn

It was really quite esy remove the screws from the back and pop the top off . then remove 2 top inside screws from the front , lift the front off the sides , support the drum and lift out , you will then see the idler wheels, replace them with the new ones ,replce the tensioner , wrap the belt around the drum, need help putting the drum back in the case, have someone hold the drum in place while you lay on the ground and put the belt around the motor pulley and the tensioner on the bottom.you then put the front panel back into place and secure with the 2 inside screws, then put the rest back together in reverse oder. ... hope this helps someone

Help other customers find the most helpful instructions.

Were these instructions helpful?   

18 of 22 people found this instruction helpful

Parts Used:
  • Maintenance Kit
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Richard from Groveland, MA

Belt broke, dryer stopped.

Replaced the belt and the wheels supplied with the kit. I also cleaned the inside of the unit. It looks and works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

17 of 19 people found this instruction helpful

Parts Used:
  • Maintenance Kit
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Screw drivers
Customer: Charles from Gray, TN

Drayer was making squeaking sound

Took off the top and front panel. Found that the belt tensioner was worn out. Decided to pull drum out,and replace the belt and drum rollers also. Put it back together, and it works fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16 of 18 people found this instruction helpful

Parts Used:
  • Maintenance Kit
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Lynda from Syracuse, NY

Dryer sounded like I was strangling a dog

First, I watched a utube video of replacing the dryer belt. Then I went to Sears Hardware and couldn't find a part. Then I ordered the parts for my favorite online repair parts source - partselect.com. I had the part in one day! We did exactly what the video showed and also replaced the two wheels that looked like roller blade wheels. Piece of cake. Saved a $75 repair call plus whatever the parts would have been and spent about 20 minutes doing it. Back in business. Great for a 12 year old dryer! Buy the dryer kit!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

13 of 15 people found this instruction helpful

Parts Used:
  • Maintenance Kit
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Daniel from Hamilton, OH

Squeaky dryer

I looked for squeaky dryer within parts select and went with the 80%. I received the Maintenance Kit, replaced two rollers and it works like new. Amazing since this is the first time I have ever opened a dryer. The instruction sheet and parts were all I needed.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

11 of 13 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Customer: Charles from Clarissa, MN

Motor wore out

I took the dryer apart ( using a repair book ) It was Super Simple to do I only needed a extra set of hand's to hold the drum in place while reassembling it. removed the hold down snap on collar's on the Motor ( after removing the Blower from the back of the dryer ( super simple. Extra set of hand's needed ) Reassembled in the same order. And now The Dryer work's like NEW..Shure Beat Buying a new Dryer..

Help other customers find the most helpful instructions.

Were these instructions helpful?   

10 of 11 people found this instruction helpful

Parts Used:
  • Maintenance Kit
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Judy from Kalamazoo, MI

Bearings wore out of drum rollers

I raised the top of the dryer, removed the front, the belt and the drum. Slipped off old rollers, installed new ones and new tensioner. Reinstalled drum and belt, bolted front back on and closed the top.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

9 of 10 people found this instruction helpful

Parts Used:
  • Maintenance Kit
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Customer: Chandra from Orange, CA

Rollers were wore out

Just follow the instructions the one was provided with Maitanace kit we bought from you.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

10 of 13 people found this instruction helpful

Parts Used:
  • Maintenance Kit
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Wrench (Adjustable)
Customer: Kelly from Waukegan, IL

Quick and simple - quickest $100 I've ever saved!

Removed the two screws under the lint trap
Opened the top (had to use flathead screwdriver to release latches)
Disconnected door switch harness from front panel
Removed 2 screws holding front panel on dryer
Lifted out dryer drum (previous belt had broken)
Vacuumed inside of dryer (found $3 in quarters!)
Put new belt around drum
Put drum back in dryer, using empty laundry soap bottle to support its weight
Looped belt around pulley and motor; secured pulley to dryer bottom
Made sure rear gasket thingy was aligned properly and drum turned freely
Put front panel back on
Re-attached door switch
Closed top and put screws back in under lint trap
Fired it up - WOOHOO!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-15 of 55

Model Cross Reference

This part works with the following models:

PartSelect Number: PS373087
Manufacturer Part Number: 4392065
Brand Model Number Description
Kenmore11060012001Dryer
Kenmore11060172001Dryer
Kenmore11060232001Dryer
Kenmore11060522900Dryer
Kenmore1106062110Dryer
Kenmore11061202010Dryer
Kenmore11061202011Dryer
Kenmore11061252010Dryer
Kenmore11061252011Dryer
Kenmore11062202101Dryer
Kenmore11062212101Dryer
Kenmore11062512101Dryer
Kenmore11062514101Dryer
Kenmore11062602101Dryer
Kenmore11062612101Dryer
Kenmore11062622101Dryer
Kenmore11062702101Dryer
Kenmore11062712101Dryer
Kenmore11062722101Dryer
Kenmore11062724101Dryer
Kenmore11062802101Dryer
Kenmore11062812101Dryer
Kenmore11062822101Dryer
Kenmore11062824101Dryer
Kenmore11062852101Dryer
Kenmore11062872101Dryer
Kenmore11063102100Dryer
Kenmore11063112100Dryer
Kenmore11064102300Dryer
Kenmore11064112200Dryer