Maintenance Kit 4392065 | Official Whirlpool Part | Fast Shipping | PartSelect

Maintenance Kit

Product Description

Maintenance Kit Specifications

  • This multi rib belt helps rotate the drum. The drum support roller kit allows the dryer to tumble properly by supporting the drum cylinder. The idler pulley provides the tension required for a multi-ribbed belt.

  • Black, White, Silver

  • Plastic, Metal, Rubber

  • Dryer Repair Kit

  • This is one complete maintenance kit. The kit includes the drum belt, drum support rollers, one idler pulley, four tri-rings, and one clip.

  • The belt attaches to the drum, idler pulley, and motor pulley. The drum rollers are attached to shafts on the rear bulkhead and the idler assembly attaches to the dryer base. The support rollers are attached to the dryer drum and roller shaft. The idler pulley is located by the motor and the belt. Tri rings can be found both on the idler pulley shaft, or on the rear drum roller shaft.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Noisy, Will not tumble, Will Not Start, No heat or not enough heat.

This part works with the following products:

Dryer.

This part works with the following brands:

Whirlpool, Kenmore, Roper, Inglis, Estate, KitchenAid, Crosley, Maytag, Amana, Admiral, Magic Chef.

Part # 4392065 replaces these:

2014, 26000279435, 26000279436, 279435, 279436, 279708, 279708MS, 279709, 279709MS, 279860, 279948, 4392065, 4392065VP, 587636, 80046, 8106, 8237, 8238, AP3131942.

What does this part do:

This multi rib belt is an important part in your dryer, it is what helps rotate the drum. The drum support roller kit allows the dryer to tumble properly by supporting the drum cylinder. The idler pulley provides the tension required for a multi-ribbed belt.

Why does this part break:

The dryer has moving parts that are subjected to intense tumbling action and heat. These parts included in the kit are wear and tear parts that will deteriorate over time.

What happens when this part breaks:

If your dryer is in need of a maintenance kit, it may be making loud, squeaking, and/or squealing noises while the drum is turning. This is from normal wear and tear. The drum may eventually stop turning all together.

Attaches to:

The belt attaches to the drum, idler pulley, and motor pulley. The drum rollers are attached to shafts on the rear bulkhead and the idler assembly attaches to the dryer base. The support rollers are attached to the dryer drum and roller shaft. The Idler Pulley is down by the motor and the belt. Tri rings can be found both on the idler pulley shaft, or on the rear drum roller shaft.
Part Videos
Difficulty: Easy | Tools Required: Screw drivers,Nutdriver
Repair Tip: Clean the lint from the motor and heater when installing this kit. The idler may not be the same as the original but it is an improved design.

Replacing your Whirlpool Dryer Maintenance Kit

Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 59 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
DENNIS from ALTOONA, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Parts Used:
4392065
Broken drive belt
Grow a second set of hands. Always unplug any appliance. Remove lint screen. remove two screws (philips Head). I took a wooden shim lightly tapped w/hammer to pop front of dryer top free. Mine worked on hinges and just flipped back til it rested against the wall. Removed two 5/16 screws inside holding face on carefully raise face section off the support clips at either side on the bottom. Pull drum out (I have the large style drum commercial size [approx.). Clean the inside free of all lint (known to be fire hazard). Sling new belt around drum. Get newly grown set of hands to hold drum in place. Pinch belt to fit between tensioner, lift tensioner and place belt around motor pulley. Spin drum couple times to make certain belt isn't twisted. Reverse dismantle proccess to put back together. Replace all parts that come with kit, you'll feel better knowing you got a new dryer, almost.
245 of 268 people found this instruction helpful.
Was this instruction helpful to you?
Michael from Haines City, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
Parts Used:
4392065
Dryer making extra noise while running
1st Unpluged power.
2nd removed two screws under lint screen cover.
3rd poped up lid with flathead screwdryer, then removed (2) 5/16 screws from door cover and unpluged lid switch, lifted up dryer door pannel
4th removed drum
5th took out plastic triangle wheel rings
6th removed old belt guild (to motor pully)
7th removed old wheels and plastic rings stops
8th cleaned excessive hair dust with shopvac
9th put new replaicment part in dryer. made sure to turn manually to make sure belt was lined up properly, then put all dryer peices back.
10th aditional work, took back cover off and removed the (4) 1/4 screws for lint screen case (left side in dryer) vacumed out any excessive dirt lint ect, also cleaned any excessive dust I found in back of dryer, dryer , exhaust ect, and put all back together.
JUst like a new dryer aain after all PM was complete.
70 of 78 people found this instruction helpful.
Was this instruction helpful to you?
Herbert from Holley, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
Parts Used:
4392065, WP3977767, 279838
No heat,thumping when running
Removed front panel, drum,replaced belt,tensioner and worn rollers. Then removed rear panel and replaced heating element and high limit thermostat. While I was there completely cleaned inside of dryer. Repair and replacement of parts was quite easy. Just take your time and don't hurry it.
67 of 89 people found this instruction helpful.
Was this instruction helpful to you?
Matthew from East Islip, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Parts Used:
4392065, WP347139
drum stopped turning on dryer
Great! Spent about $36.00 and I ended up with a overhauled dryer. I ended up cleaning the whole thing out, it's amazing how much stuff accummulates in the frame of a dryer, I also found about $2.00 in change. It's a good idea to clean out a dryer every few years and the broken belt forced me to do it.
But anyway the parts cam very quick and had easy to follow directions.
I would reccomend part select. Matt
56 of 66 people found this instruction helpful.
Was this instruction helpful to you?
Clifford from Mastic, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
Parts Used:
4392065
Dryer stopped tumbling
Pryed the top off the dryer, unplugged the door switch, took the screws out of the front panel, then lifted the drum out. Placed the new belt around the drum and while my wife held it in place and steadied it, I reached underneath and looped the belt through (as per instructions), reassembled and back in business! Reaching under the drum was not that easy....VERY tight space to work in and there was no way I could get both hands through, I almost gave up, but one last try and a couple of good grunts, and it popped into place. Getting the wires back on the door switch was a bit of an ordeal too. Took about 30 mins. but still worth it. I'm sure I saved at least a $100 repair.
30 of 34 people found this instruction helpful.
Was this instruction helpful to you?
Jesus E from Palm Bay, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Parts Used:
4392065
dryer makes a lot of noice, bad rolleres
super fast shipping, got the part in two days, and had it done in 15-20 min, remove the front pannel, remove the belt and tenssioner,took the drum out , took the old rollers , lubed the shafts,replaced the old rollers with the new ones, intalled the drum back, the tenssioner and the new belt, reinstalled the front pannel, and done...easy and fast job, like new dryer, works nice...save some money...the new one will do the same..just dry the clothes.
28 of 30 people found this instruction helpful.
Was this instruction helpful to you?
wendy from bush, LA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
4392065
Dryer Came On & Made Alot Of Noise
Took off the front of & lifted the top up. Pulled the drum out & replaced the two wheels that turn the drum, replaced the belt & replaced the pully wheel that turns the belt & dryer motor & put back together. The dryer now runs like a new one. Has no noise when running.
25 of 764 people found this instruction helpful.
Was this instruction helpful to you?
Richard from Groveland, MA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
4392065
Belt broke, dryer stopped.
Replaced the belt and the wheels supplied with the kit. I also cleaned the inside of the unit. It looks and works like new.
22 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Shawn from Akron, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
4392065
Dyer drum doesnt turn
It was really quite esy remove the screws from the back and pop the top off . then remove 2 top inside screws from the front , lift the front off the sides , support the drum and lift out , you will then see the idler wheels, replace them with the new ones ,replce the tensioner , wrap the belt around the drum, need help putting the drum back in the case, have someone hold the drum in place while you lay on the ground and put the belt around the motor pulley and the tensioner on the bottom.you then put the front panel back into place and secure with the 2 inside screws, then put the rest back together in reverse oder. ... hope this helps someone
21 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Charles from Gray, TN
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
4392065
Drayer Was Making Squeaking Sound
Took off the top and front panel. Found that the belt tensioner was worn out. Decided to pull drum out,and replace the belt and drum rollers also. Put it back together, and it works fine.
20 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
95 Reviews
4.5
out of 5
Filter By Rating:
  • 5 Stars
    76
  • 4 Stars
    6
  • 3 Stars
    3
  • 2 Stars
    2
  • 1 Stars
    8
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Multi Rib Belt - 92-1/4"
$15.88
PartSelect #: PS346995
This multi rib belt is an important part in your dryer, it is what helps rotate the drum. The belt attaches to the drum, idler pulley, and motor pulley. As the armature of the motor rotates, the belt begins to move and t...
Rear Drum Support Roller Kit
$21.24
PartSelect #: PS347627
The drum support roller kit allows the dryer to tumble properly by supporting the drum cylinder. The kit includes two drum rollers, four tri-rings, and one palnut (or retaining washer). The kit does not include a belt or...
Idler Pulley Assembly
$16.70
PartSelect #: PS11743765
This part provides the tension required for a multi-ribbed belt. It also helps the belt rotate the drum and attaches to the idler pulley wheel. If your dryer will not start or tumble, takes too long to dry, or is noisy d...
Tri Ring
$6.69
PartSelect #: PS11755850
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pulley shaft, or on the...
Support Roller Clip
$4.88
PartSelect #: PS11746832
Sold Individually.
Model Cross Reference

This part works with the following models:

PartSelect Number: PS373087
Manufacturer Part Number: 4392065
Brand
Model Number
Description
Kenmore
110.796228
Dryer - Kenmore Dryer Model 110.796228 (110796228, 110 796228) Parts
Kenmore
11060012001
Dryer
Kenmore
11060172001
Dryer
Kenmore
11060232001
Dryer
Kenmore
11060522900
Dryer
Kenmore
1106062110
Dryer
Kenmore
11061202010
Dryer
Kenmore
11061202011
Dryer
Kenmore
11061252010
Dryer
Kenmore
11061252011
Dryer
Kenmore
11062102310
Dryer - 29" ELECTRIC DRYER
Kenmore
11062202101
Dryer
Kenmore
11062212101
Dryer
Kenmore
11062512101
Dryer
Kenmore
11062514101
Dryer
Kenmore
11062602101
Dryer
Kenmore
11062612101
Dryer
Kenmore
11062622101
Dryer
Kenmore
11062702101
Dryer
Kenmore
11062712101
Dryer
Kenmore
11062722101
Dryer
Kenmore
11062724101
Dryer
Kenmore
11062802101
Dryer
Kenmore
11062812101
Dryer
Kenmore
11062822101
Dryer
Kenmore
11062824101
Dryer
Kenmore
11062852101
Dryer
Kenmore
11062872101
Dryer
Kenmore
11063102100
Dryer
Kenmore
11063112100
Dryer