Compresser Mounting Kit 4388295

This compressor mounting kit is a set of components used to secure and support the compressor in refrigerators. The kit is supplied by the original manufacturer, and it includes 4 rubber grommets/bushings and 4 mounting screws. The rubber bushings function as buffers between the compressor and mounting brackets to reduce movement and noise from the appliance, and the mounting screws hold the compressor in place to provide additional stability. Over time it is normal for these components to wear down or become damaged or loose, leading to increased vibrations, excessive noise, and potential damage to the compressor and surrounding parts. Disconnect the power supply and remove the rear appliance cover to access the compressor unit. Remove the mounting screws and lift the compressor out of the refrigerator. Carefully remove the rubber bushings off the unit and press the new ones into place. Place the compressor back in the refrigerator and secure it with the new mounting screws. Reattach the rear cover to complete your repair.