Door Shelf End Cap Set

I forgot to order all the parts i needed, and when I placed a second order for the remaining parts on the same day, PartSelect contacted me and asked if I wanted to consolidate the order and save on shipping. I thought this was very thoughtful. Anyway, the lower door handle was very easy to replace, I just cut the handle to the correct length with a hacksaw, put the new end cap on, and screwed it in. The inside shelf end caps were a snap too. Just remove the old ones and snap the new ones in place. Done!

The part for this refrigerator/freezer is no longer made by Whirlpool so a longer retainer bar was recommended and it was necessary to cut the bar to fit our freezer shelf. It's easy to cut if you have a powered mitre saw but if you don't have one, you would have to ask someone to cut it for you and that could take you some time and additional expense. It might be better to ask a service company to do this for you if you don't have the powered mitre saw.

Remove old parts, install old bar to new caps and snap in place. So easy even a caveman can do it!

replaced caps

The brackets were surprisingly inexpensive, arrived in lightning time, and were so simple to install! A bonus is that the CORRECT parts arrived! I didn't have to send anything back. I just snapped them into the shelf and that was that!

I followed the directions that came with the new part. Thank you for making it so easy. You sent me everything I needed to make the repair.

Slid the end caps onto the shelf, placed the tape on the pieces as noted in the directions, and put the shelf back in place. Fast service, exact part, easy to find on the web site! Great!

I slid the bar into the end caps, then slid the end caps into the slots on the door. No tools were required. My fridge is old, and I was very pleased that I was able to find the part.

Simply replaced broken ones.

snapped the new ones on the aluminum bar and inserted into the freezer