Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
February 23, 2018
Where is the pump filter supposed to sit in the drain mechanism? I just took apart the rubber drain tube before the pump looking for something slowing the draining way down and i see the pump filter thru the opening, i’ve done this same procedure a few times and have never seen that.
For model number GLTF2940FS0
Hello Sarah, Thank you for your inquiry. The pump filter is supposed to sit down inside the bellow part of tub-to-pump rubber drain hose at approximately the second rib of the bellow. The video for the drain hose-part# 134455900 shows how to take the filter/coin trap out. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
November 30, 2019
I am replacing f35 (drain pump) but noticed the filter inside the drain hose. The filter just floats/sits inside at the bottom of the drain hose bellow. (part 134455900). Is that the correct orientation? To just sit inside the below unattached?
Hi Gino, that is correct, it is unattached. It should have a fairly snug fit. Thank you for your question and good luck with your repair!
Also the filter shown in the picture above is empty inside.The one I have seems to have something like a screen or something inside of it blocking the holes. Is that normal? Also I couldn't find the video you told Sarah about on how to remove the filter.
Hi Gino, that seems normal, this part is a replacement for the original so it may look slightly different. The video is here: https://www.youtube.com/watch?v=2iqN8Ly-WcE&feature=emb_title. Thank you for your question and good luck with your repair!