Part Location Diagram of W10439651 Whirlpool Drive Motor
See part 1 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Drive Motor W10439651

★★★★★
★★★★★
1 Review
$ 267.18
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS3652693
Manufacturer Part Number W10439651
Manufactured by Whirlpool
Product Description

Drive Motor Specifications

This drive motor is for trash compactors. The drive motor turns the gears and chain that raise and lower the compactor ram. If your trash compactor will not start or will not stay on during the compaction cycle, you may have a defective drive motor. The start or run switch is used to supply power to the motor to initiate the compaction cycle. If the windings in the motor are open or if the motor centrifugal switch is open, the unit will not start. To check for a defective motor, you will need to remove the unit from the cabinets and disconnect the power.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Trash Compactor.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Jenn-Air.
Part# W10439651 replaces these:
AP5620185, 2311911, 14211330, 14214735, 41001029, 41001030, 41001085, 4163377, 4163461, 7-49061, 7-49077, 7-76013, 7-76171, 7-76828, 7-77707, 7-77709, 7-77710, 7-80162, 7-80164, 7-80360 , 7-80378, 749061, 749077, 776013, 776171, 776172, 776495, 776828, 776851, 777707, 777709, 777710, 777741, 777968, 777970, 777971, 780043, 780162, 780164, 780359, 780360, 780378, 9870343, 99747591, 99909585, W10318887, W10806338, WPW10318887, Y776013, Y776171, Y776828, Y777707, Y777709, Y777710, Y780162, Y780164, Y780360, Y780378 Show less
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
1.0
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

9 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Terry Flanery
February 10, 2020
What is the purpose of the switch mounted to the motor?I thought that was the directional switch.
For model number TU8100XTP3
PartSelect logo
Hello Terry, thank you for your question. The switch on the motor is a centrifugal switch. The switch is used to disconnect the starting winding of the motor once the motor approaches its normal operating speed. The directional switch and the centrifugal switch work together to direct the ram one way, and then return it to the original position. I hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Andy
November 4, 2017
On the down stroke the motor does not reverse. It makes a ratcheting noise and I have to push the off button. Then when I hit the on button it comes up. Is this a motor problem? I was told the motor has a built in reverse switch in it, is this correct?
For model number GX900QPPS2
PartSelect logo
Hello Andy, Thanks for your question. The motor does have a reversing switch, and the most common solution to your issue is replacing the drive gear from the drive gear kit, part number PS398589. I hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:
George
August 8, 2018
Motor hums when turned on. I cleaned the entire unit including the gear box. I turned the gear several turns and it seems to be free. Motor still hums. Is this a bad motor?
For model number KUCC151JSS0
PartSelect logo
Hi George, thank you for your question. Unfortunately more than likely. You may want to test your directional switch just in case. I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
Brian
November 14, 2019
I have replaced the drive gears 2x and the bump stoppers. The motor seems to want to go too far as it doesn't reverse at the bottom until after the gears skip or ultimately strip. Is this a centrifugal switch or motor problem?
PartSelect logo
Hello Brian, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Was this helpful?
Thank you for voting!
Brian
November 14, 2019
I have replaced the gears and the ram stops on my trash compactor however, they have been stripped again. It appears that the motor w10439651 wants to continue past what should be the bottom reverse point. I observed a loud noise accompanied with gear slipping before it reverses to go back up. Is this caused by the centrifugal switch 777971 and can it be replaced without replacing the whole motor?
For model number JQTC407W3
PartSelect logo
Good Day Brian. Thank you for question in regards to your unit (Model Number JQTC407W3). The model number you provided is not recognized. In order for us to assist you we will need you to provide us with the correct model number so we can research into finding information specific to your unit. Please verify the number you provided us. If it is correct, we recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part! Best Regards.

Was this helpful?
Thank you for voting!
Terry
February 8, 2020
Am i able to buy just the directional switch or do i have to buy the motor assembly to get one? Compactor is 28 years old. Thanks.
For model number TU8100XTP3
PartSelect logo
Hello Terry, Thank you for your question The directional switch for your model is under part PS11744742. We hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:
Amy
July 27, 2021
The ram wasn't stopping so we replaced the directional switch, which solved the problem. A week later it started acting up again. We figured the switch must be bad so we replaced with another one. That solved the problem. Turns out the switches were not defective, according to the ohm reader. We didn't think to test the switches before replacing them. What else might cause the ram from stopping if it's not the switches? And why does the problem get fixed when we replace the switch?
For model number GC900QPKQ0
PartSelect logo
Hello Amy, Thank you for the question. We suggest checking the Drive Gear Kit. If your compactor ram is getting stuck, there is excess noise during its cycle, or if your compactor does not stop at the end of its cycle, the driving gear may be the issue. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Mark
October 19, 2021
I just replaced the start switch. Now my unit will only work if I hold the start button. It's supposed to get it started and then run a cycle.
For model number TC507B
PartSelect logo
Hello Mark, Thank you for the question. This normally indicates the Switch on the Motor is defective and will need to be replaced. The Switch is only sold as part of the Drive Motor Assembly. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Dale
September 10, 2022
Can you buy just the centrifugal switch on top of motor?
For model number 6651350194
PartSelect logo
Hi Dale, Thank you for your question. The switch is only sold with the motor. If you need help placing an order for the motor, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3652693
Manufacturer Part Number: W10439651
Brand
Model Number
Description
Kenmore
19025
Trash Compactor - Kenmore Trash Compactor Model 19025 (1988) (19025(1988)) Parts
Whirlpool
2872^0A
Microwave Oven Combo
Roper
2872W0A
Range - Electric
Roper
2893*0A
Range - Ranges, Electric*
Whirlpool
2893^0A
Microwave Oven Combo
Roper
2893W0A
Range - Electric
KitchenAid
4KUCC150S0
Trash Compactor
KitchenAid
4KUCC150S1
Trash Compactor
KitchenAid
4KUCC150S2
Trash Compactor
KitchenAid
4KUCC151T0
Trash Compactor
KitchenAid
4KUCC151T1
Trash Compactor
KitchenAid
4KUCC151T4
Trash Compactor
Kenmore
6221338550
Trash Compactor
Kenmore
6221358550
Trash Compactor
Kenmore
6221388550
Trash Compactor
Kenmore
6228369301NZ
Trash Compactor
Kenmore
6228415001NO
Trash Compactor
Kenmore
6228416001GO
Trash Compactor
Kenmore
62284169900
Trash Compactor
Kenmore
6228419001GO
Trash Compactor
Kenmore
62284199910
Trash Compactor
Kenmore
62284199920
Trash Compactor
Kenmore
6651330590
Trash Compactor
Kenmore
6651336580
Trash Compactor
Kenmore
6651336581
Trash Compactor
Kenmore
6651336582
Trash Compactor
Kenmore
6651338550
Trash Compactor
Kenmore
6651338580
Trash Compactor
Kenmore
6651338581
Trash Compactor
Kenmore
6651338582
Trash Compactor
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service