SOCKET,LAMP EAG62831801

Hello Lou, Thank you for your inquiry. Open up both doors, take the light lens out by using a putty knife to release the tabs. Use a philips screwdriver to remove the light housing cover screws, then a putty knife to release the locking tab in the front, just slide it under the edge of the cover and twist it to release the tab and pull the housing down and out. Disconnect the wiring harness by reaching up and press the locking tab on the bottom and pull the plug off. Pull the assembly completely out of the fridge. Remove the bulbs to avoid damaging them. Turn the assembly over and remove the wiring and light sockets. Remove the grounding wire with a flat head screwdriver, then use a Philips head screw driver to remove the screws from the safety device. Once you have the screws out, take a flat head screw driver and release the locking tabs in the middle of the sockets that hold them to the metal plate by pushing them in. You can then remove the sockets and wiring through the metal plate. Carefully feed the wires of the new socket through the metal plate and snap the new sockets in placem you want to make sure that tabs on the socket go underneath the far left and far right side of the metal plate. Once you have the sockets in place, you can press down and lock the locking tab in on the other side, it is best to do one side at a time. Once the sockets are in place, flip the metal plate over and put the rest of the wires on. Hook the ground wire back up into its mounting tab. Re-attach the screws that hold the bracket of the safety. Put the bulbs back in, then re-attach the wiring harness back in (it only goes in one way). Then line up the mounting tabs on the back of the housing, and slide the back of the housing into place. Rotate it upwards, and push in the longer locking tab in the front and snap the housing in place, then re-attach the screws. Replace the light lens, back tabs first, then snap the front into place. I have included a link for a repair video for a similar lamp socket to give you a general idea of the procedure. Hope this helps! https://www.youtube.com/watch?v=WPNTth0piRI&t=0s&index=184&list=PL3EB33F2356EAFCD4

Hello Juanita, Thank you for your inquiry. We have researched the model number that you have provided and show the light bulb as part# PS3530413. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!