Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

GASKET ASSEMBLY,DOOR

★★★★★
★★★★★
5 Reviews
$79.62   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS3639262
Manufacturer Part Number ADX73350609
Manufactured by LG
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Kenmore, LG.
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Robert
    September 5, 2019
    Please send the part numbers for left and right door gaskets on LG refrigerator model Lfx25978st
    For model number LFX25978ST
    Hello Robert, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part #: PS12588651 and Part #: PS3639262. Hope this helps!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Andrew
    September 11, 2019
    Does this door gasket include magnetic strip to help seal the door to body? Also, the LG cust serv rep mentioned needing adhesive for this gasket replacement which i've never heard of. Is this right or was he wrong?
    For model number LFC25765ST
    Hi Andrew, thank you for your question. Yes it would and no you do not need adhesive to install this part. There is a door gasket retainer that keeps it in place. I hope that helps. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 5.0 / 5.0, 4 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Broken spring door million torn door gasket
        Door million undid 2 screws in plug wire easy no need for directions. Gasket pull off old one fit New in with index finger no tools needed.
        • GUY from HECTOR, NY
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Screw drivers
        • Parts Used:
          AGU73530705, ADX73350609
        5 of 6 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Original gasket became deformed creating bad seal.
        Soak new gasket in hot water in bathtub to soften while removing old gasket. No tools required, it was a little difficult pulling old gasket out but once you get it started part way out it will come out real easy. By the time you get the old gasket out the new gasket will be warm and easy to get started into the groove it pops into. Starting on back (hinged) side is of door, begin pushing new gasket into groove. Work up and down pushing gasket into place working towards the corners and around to the front side of door. Your all done. This is a job I went into a little nervous thinking I might be calling a service man out to fix, but it turned out to be really easy.
        • Stanley from Armona, CA
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
        • Parts Used:
          ADX73350609
        3 of 3 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Gaskets were deteriorating from use
        I started with the right door and just pulled the gasket off. I then made sure which gasket was for that door and aligned it with the old gasket to make sure of top and bottom. Then it just pushes in with your thumb. It took about 5 minutes. The left door is a little more complicated. First remove 2 screws that hold the mullion. Gently hit the bottom of the mullion In an upward motion with the flat of your hand. The mullion comes loose and can just hang by the wires. Remove old gasket and install the new one. Reinstall the mullion and you are done. This one takes about ten minutes. DONE!!
        • Rick from STAMFORD, NY
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        • Parts Used:
          ADX73350636, ADX73350609
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        The gasket was torn and leaking cold air.
        Pulled the old gasket out.l. Started at the top left corner of the gasket and pushed the Corning in tight and push the gasket in to the other corner down the right side th the corner, across to the left bottom corner and up the right side to the start of the beginning. Very easy installation.

        Delivery was fast. Satisfied with part select.com. Spoke to a representative in customer service and she checked to make sure I was ordering the correct part. Very satisfied with your service.
        • CONNIE from YORK, PA
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
        • Parts Used:
          ADX73350609
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          5 Reviews
          4.6
          Filter By Rating:
          • 5 Stars
            4
          • 4 Stars
            0
          • 3 Stars
            1
          • 2 Stars
            0
          • 1 Star
            0
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

              Get in touch, we're here to help!

              Open until 10PM EST

              Contact Customer Service