Quick Question!

Have you ever purchased from PartSelect.com before?

358749-1-S-Whirlpool-4318273           -Door Switch Kit
358749-1-S-Whirlpool-4318273           -Door Switch Kit 358749-2-S-Whirlpool-4318273           -Door Switch Kit 358749-3-S-Whirlpool-4318273           -Door Switch Kit https://www.partselect.com/Schematics/Whirlpool/PN1HI8UE.gif

Door Switch Kit

Your Price

$41.59
Order within the next 12 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS358749
Manufacturer Part Number 4318273
Manufactured by Whirlpool

This kit comes with 2 micro switches and a wire harness.

This part works with the following brands: Whirlpool, Kenmore, Roper, KitchenAid, Estate, Inglis, Crosley.

This part works with the following products: Dishwasher, Microwave.

This part fixes the following symptoms:

  • Will Not Start.
  • Door latch failure.
  • Door won’t close.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful

Question:

Not sure if this kit deals with our problem. The selected wash, rinse, & dry buttons light up as usual and "washing" status lights up, but we hear no noise and no water runs. The dishwasher worked fine yesterday.

Bill for model number DU980QPDQ3
Answer:

Hello Bill, thank you for contacting us. The door switch kit would be a good place to start. If the switches send bad signals to the board it will think the door is open and will not start, but everything lights up as if it should work. Hope this helps!

Question:

My dishwasher will start & run, but my start switch light will not come on.

Doug for model number kudm25shwh0
Answer:

Hi Doug, Thank you for the question. If everything is working as normal and it is just the light then it should like the light is burnt out. The light is part of the Control Panel so it would need to be replaced. Hope this helps!

Related Parts: Control Panel

Most Recent

Question:

I have just replaced the fuse and harness but the machine won't work (confirmed that the replaced fuse is busted using continuity tester) . I have checked the door switch and there is power going thru the fuse (used voltage detector). There is clicking sound when i close the door but there is no light in the panel. Please help. Thank you.

Leo for model number 66513593K600
Answer:

Hi Leo, Thank you for your question. I would say that perhaps it may be your actual board that is the problem, if you are not getting any power to it. You may want to check that part next. Good luck with your repair.

Question:

No funciona la maquina y esta prendido el boton contro locked

rene for model number du1000cgq2
Answer:

Hola Rene Gracias por su consulta. Puede que tenga que desenchufar el lavavajillas o apagarlo para ver si esto ayuda a desbloquear el botón. Si esto no ayuda, hay algunas partes que necesitará comprobar para ver cuál está causando el problema. Tendrá que comprobar el fusible y el arnés térmico, el kit de interruptor de puerta, el termostato de límite alto, el tablero de control electrónico y la palanca de cierre. Espero que esto ayude. ¡Gracias y que tengas un buen día! ________________________________________________________________________________ Hi Rene, Thank you for your inquiry. You may have to unplug the dishwasher or turn the power off to it to see if this helps unlock the button. If this does not help there are some parts that you will need to check to see which one is causing the issue. You will need to check the thermal fuse and harness, the door switch kit, the high limit thermostat, the electronic control board and the latch lever. I hope this helps. Thank you and have a great day!

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.7 / 5.0, 5 reviews What's this?
1-5 of 5
 

126 of 188 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers
Customer: Thomas from Dunwoody, GA

Broken latch on dishwasher prevented operation

Photograph or diagram how the wires connect to the switches before taking out the old assembly. I could have salvaged switches from the old assembly by pulling out the white pins (and avoided buying the new switch kit). There's only one way the pieces go back together, so the wire connections are the only point that required special care and attention.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

29 of 42 people found this instruction helpful

Parts Used:
  • Door Switch Kit
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: David from Bay City, TX

Dishwasher stopped in middle of wash cycle..

I disasembled the inner door and replaced the door switches with new ones.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

22 of 28 people found this instruction helpful

Parts Used:
  • Door Switch Kit
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: Jay from Alexandria, VA

Dishwasher would not turn on. Switch fuse broke.

I removed inner face of door, cut wires leading to door switches, and then installed the new door switches and wire harness.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

19 of 25 people found this instruction helpful

Parts Used:
  • Door Switch Kit
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Nat from Raleigh, NC

It would turn off and on mid-cycle and finally quit completely

I turned off the circuit. I removed the interior side of the door and then the plastic covering over the electrical wires and switches (I counterbalanced the door with a couple of half gallon juice containers). I removed the wires attached to the switch on the door handle and the door handle itself. The handle and switch parts disassembled and I replaced the switches (part of kit). I cut off the singed wire and the other three beyond the damaged portion and stripped the wires and connected the extensions (part of kit). I attached the new wires to the switches and closed up the interior door. Lastly, I turned the circuit breaker back on. All was well!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Door Switch Kit
Level of Difficulty: Very Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Kathy from Memphis, TN

Dishwasher wouldn't run

Turned off electricity. Removed the interior door cover. Removed door switch. Replaced switches & reversed process. By the way - I am a woman & diagnosised, ordered part & fixed it myself - I have no experience in this field. THANKS for all your information on your site.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-5 of 5

Model Cross Reference

This part works with the following models:

PartSelect Number: PS358749
Manufacturer Part Number: 4318273
Brand Model Number Description
Kenmore110723120Dishwasher
Kenmore110773811Dishwasher
Kenmore110773812Dishwasher
Kenmore110773813Dishwasher
Kenmore110773881Dishwasher
Kenmore110773882Dishwasher
Kenmore110773883Dishwasher
Kenmore66513173K704Dishwasher
Kenmore66513402K900Dishwasher
Kenmore66513402K901Dishwasher
Kenmore66513409K900Dishwasher
Kenmore66513409K901Dishwasher
Kenmore66513442K900Dishwasher
Kenmore66513442K901Dishwasher
Kenmore66513443K900Dishwasher
Kenmore66513443K901Dishwasher
Kenmore66513444K900Dishwasher
Kenmore66513444K901Dishwasher
Kenmore66513449K900Dishwasher
Kenmore66513449K901Dishwasher
Kenmore66513492K600Dishwasher
Kenmore66513499K600Dishwasher
Kenmore66513592K600Dishwasher
Kenmore66513593K600Dishwasher
Kenmore66513594K600Dishwasher
Kenmore66513599K600Dishwasher
Kenmore66513692K600Dishwasher
Kenmore66513699K600Dishwasher
Kenmore66513882K800Dishwasher
Kenmore66513882K801Dishwasher