This door closing cam kit is intended for use with the bottom of refrigerator and freezer door hinges. The cam helps with the closing of the doors and to keep them slightly in position when opened.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Refrigerator Door Closing Cam Kit
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close | Door Sweating | Fridge too warm | Clicking sound
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Janice M - May 3, 2023
Verified Purchase
Didn’t Fit
The part didn’t fit our refrigerator, but forced it to work, at least temporarily. The “how to” repair video, however, was most helpful.
★★★★★
★★★★★
James B - March 13, 2023
Verified Purchase
Just what the doctor ordered!
It took me all of 10 minutes to replace these door hinge parts. Fridge now closes all by itself and doesn’t make a horrible grinding sound. Just a little hint, apply a little grease before hanging door back on.
★★★★★
★★★★★
William C - October 5, 2022
Verified Purchase
Door cam repair
Watch the youtube for how to do the repair.
★★★★★
★★★★★
Linda C - April 15, 2021
Verified Purchase
Easy repair
Saved me $$$ on a repair person. Delivery was quick, repair was easy!
★★★★★
★★★★★
Barbara K - March 26, 2021
Verified Purchase
Refrigerator door
Easy install, works perfectly
★★★★★
★★★★★
Roger B - January 27, 2021
Verified Purchase
Easy repair, works fine
The part was as advertised and fixed the problem
★★★★★
★★★★★
Robert C - December 31, 2020
Verified Purchase
Perfect!
They supplied everything including the very informative "How to" video.
★★★★★
★★★★★
David S - September 6, 2020
Verified Purchase
Everything I needed
Great seller. Good website, fast shipping, perfect.
★★★★★
★★★★★
Paul R - July 10, 2020
Verified Purchase
Simple replacement; Door Closes by itself now.
The only puzzling thing was the odd mesh crescent-shaped parts. I have no idea what they are for. The video does not mention them and I did not find any when I removed the door. Oh well, the door works fine without them.
★★★★★
★★★★★
Thomas K - April 15, 2020
Verified Purchase
Easy Fix
Quick delivery, great fit perfect as usual.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 46 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
door would not stay shut on refrigerator side
Remove one 5/16 screw from top hinge cover plate. Trace outline of hinge on top of refrigerator with sharpie, so you will know where to put hinge back. Remove 3 5/16 screws from hinge. Lift door up out of bottom hinge, place on table to be able to work on. Remove one 5/16 screw and upper cam piece from bottom of door and replace with new
... Read more upper cam piece. Remove one 5/16 screw and lower cam piece from bottom hinge on refrigerator. Replace with new lower cam piece and one screw Set door back in place and reattach top hinge with 3 screws adjust refrigerator door as needed for a nice even gap between freezer and refrigerator doors. Tighten screws down and put hinge cover back on with one screw.
Read less
tom from BASSETT, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
badly worn cam
Exactly as the demo instructed. It was very detail friendly and was very easy to follow.
harry from KINGSPORT, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator door clunking on opening and closing
Following the instructions on the site I removed the upper hinge cover and hinge(after removing the shelves from the door). I replaced both cams on the bottom hinge, reinstalled the door and the problem was solved. A couple of hints that may speed up the process: 1. On installing the door cam, I didn't get the holes in the door and cam al
... Read moreigned well due to a bit of interference from the metal tab on the door, so I temporarily inserted the upper hinge pivot in the bottom hole and retightened the cam. 2. I decide to re-align the freezer door . After this, the ice and water dispensers didn't work. Turns out the internal freezer light switch which also acts as a cutoff switch for the door dispensers wasn't being activated. Easy to adjust once the cause was discovered.
Read less
Bruce from Stuart, FL
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door just wouldn't close and sometimes stopped just close enough that it looked closed and ran all night
It was so easy I could have done the video. Many thank you's for saving me $79.00 in house call fees.... cindi
Cynthia from bethlehem, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
refrigerator door would not stay closed
Just as shown on a you tube video showing the steps involved, except I did not need to drill and tap the hole in the door. Cam repair kit contained all the correct parts.Freezer door is still working fine so I did not need to repair that door.
steve from spotsylvania, VA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
refrig warm door cam broken
Follow instructions from owners manual. top hinge first then move door upward and replace broken cam with new parts
Richard from Boca Raton, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer door would not shut without a re-enforced push
I followed your on line video, that was a fantastic help. Easy as 1,2,3. I used the tools he recommended and followed his steps. I replaced the cam on the door and on the bottom pin, its works like new.
Earl from Sandy, UT
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Socket set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
refregerator would not close by itself
Your on line video was fantastic, it led me all the way through the repair. As they say, "A picture or video is worth 1000 words". I wish everyone had instructions like you. Great Job!!!
Joseph from Scottsdale, AZ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door not closing right
repair was easy. watch the video
kenneth from soddy daisy, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Socket set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
refrigerator door did not seal and was out of alignment
I was quoted $212.00 by a service co. to make this repair. When I investigated online @ Part Select, they had all of the parts shown on schematics of each section of the refrigerator/freezer (side by side)with part numbers shown. It was easy to find the necessary parts.The cam kit came as a package for both doors and cost $12.00 plus ship
... Read moreping. Installation instructions were included.It took me an kour to make the repair. The hardest part was removing all the condiments from the shelves and remembering from which shelf they had to be returned. Net savings $200.00
Read less
joseph from haddon heights, NJ
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
22 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rick
August 14, 2017
I need to replace the bottom door cam on the refrigerator side what part numbers do i use? Are they wpz182179 and wpw10329686? Do i need (2) ps11742745 also?Thanks
For model number ED27DQXAB05
Hi Rick,
Thank you for your inquiry. The kit that you have referenced in your question, part number 4318165, contains all the parts that you will need. I hope this helps. Thank you and have a great day!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Gareth
April 26, 2019
Will this kit work on my KitchenAid ksrg25fkss04 refrigeration? When i search for the part(s) by the model number it only lists the individual cam pieces and not the kit as an option.
For model number KSRG25FKSS04
Hi Gareth, thank you for your question. Unfortunately this kit is not listed underneath your appliance model information so we cannot guarantee that every part inside of it will work for your model. According to your model information the parts are sold separately from each other. We would be able to guarantee anything that you find directly underneath your model number as being correct for your model. This kit seems like it would work, however unfortunately we cannot guarantee it for you. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
June 6, 2019
I apologize for my lack of knowledge. Will the parts in this kit work on a Whirlpool side by side model no. Ed2chqxkq05?
For model number ED2CHQXKQ05
Hello Richard, thank you for writing. This part is not shown as compatible to your model. On your model it does not come in a kit. There is the Lower Door Closing Cam part PS11739042 (the Screw is part PS11741512), and the Door Cam part PS11752991 (the Screw is part PS11742755).
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nancy
April 18, 2023
will this work my above model? Can you give dimensions on the parts?
For model number KSRB22FHSS02
Hi Nancy, Thank you for writing. The Lower Door Closing Cam for this model is PartSelect Number PS11739042 and PartSelect Number PS11752991. The parts sit on a 1" Grid to show approximate dimensions and are a guaranteed fit for this model. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
William
December 10, 2019
Refrigerator door has to be pushed closed. Unlike the freezer door which closes itself.
For model number ED5PHAXMQ00
Hello William and thanks for writing.
Troubleshoot the most common items that can cause a bad seal on a refrigerator door. Check inside the refrigerator to ensure there aren't any food containers, open crisper drawers or misaligned shelves that could keep the door from closing properly. ... If the door still fails to shut tightly, check the door gasket. # PS323906 if the gasket checks ok, then your cam might be faulty # PS11739045. We hope this helps. Please contact us anytime.
The lower cam on my fridge (ordered from this site) only fits in the grooves of the upper cam when the door is halfway open. It has to be pushed firmly to shut. The teeth seem to be off my 45 degrees. Is there a different part for my model?
For model number WRS325FDAM02
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS11739042. Thank you for your inquiry, good luck with this repair!
The light plastic swing in the door broke. The light will not go on and now it
Seems the fridge is off. Does this affect the operation of the fridge! How can I teplace
The part
For model number Wrt311fzdb02
Hello Rhonda, thank you for reaching out. The part that you are referring to is the door closing cam kit, part number PS358690. It helps the door open and close smoothly. We have attached a relevant video that can help you replace this part. We hope this information helps!
Was this helpful?
Thank you for voting!
Keith
October 13, 2023
Refrigerator section door normally stays closed, but easily can stay open. It's like there is supposed to a be a magnet to hold it closed, but it is worn.
For model number 1069555923
Hi Keith, thank you for reaching out. You may need to inspect the door gasket. If it is faulty, you may need to replace it to fix the issue. The door gasket for the fresh food section of your model comes in two colors. The white door gasket is part number PS323900, and the black door gasket is part number, PS323906. We hope this information helps!
I need 2 kick plate clamps, can't find model number, fridge old.
Hello Juanita , Thank you for the question. Here is a link to help you locate the model number sticker with the model number we need to locate parts. Hope this helps!
https://www.partselect.com/Model-Number-Locator+9+repair.htm
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
