Part Location Diagram of 4317943 Whirlpool Replacement Ice Maker
See part 100 in the diagram
Replacing your Kenmore Refrigerator Replacement Ice Maker
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Replacement Ice Maker 4317943

 Fits your 10650504991!
★★★★★
★★★★★
222 Reviews

Rated by 215 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 131.03
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 10650504991!
PartSelect Number PS358591
Manufacturer Part Number 4317943
Manufactured by Whirlpool for Kenmore, Whirlpool, KitchenAid, Maytag
Product Description

Replacement Ice Maker Specifications

This ice maker (Complete Icemaker Assembly, Whirlpool Icemaker Kit, Ice Maker Assembly, Refrigerator Ice Maker, Icemaker) receives water from the water inlet valve, freezes it, and dispenses it into the ice bucket until the bucket is full. Ice makers will need to be replaced every 3-10 years depending on the frequency of usage, and water quality. You can perform a voltage test with a multimeter or perform an inlet valve test. If you’re unable to make ice, or notice leaks then it may be a sign your ice maker is damaged and could be in need of a replacement. This model measures approximately 11x5 inches, is constructed of plastic and metal, and comes in black/silver. This ice maker is a complete assembly; the whole assembly attaches to the wall of your freezer. ***NOTE: Ice maker does NOT come with the bail or shut off arm. You must order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. The harness can be reused. The ice maker will not fit refrigerators that have the ice auger mounted on the door.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos
Difficulty: Easy | Tools Required: Nutdriver,Screw drivers
Repair Tip: To remove the shut off arm from your existing icemaker, lift the arm to the up position, unhook it from the fill cup bearing, and pull it out of the module. If you require the shutoff arm for your new replacement ice maker, be sure to order the replacemen

Replacing your Kenmore Refrigerator Replacement Ice Maker

Replacing your Kenmore Refrigerator Replacement Ice Maker

How to Troubleshoot a Refrigerator That Doesn't Make Ice

How to Troubleshoot a Refrigerator That Doesn't Make Ice

How Does an Ice Maker Work?

How Does an Ice Maker Work?

How to Troubleshoot an Ice Maker That is Not Working

How to Troubleshoot an Ice Maker That is Not Working

Test If Your Electrical Part is Failing - Multimeter Tool

Test If Your Electrical Part is Failing - Multimeter Tool
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Leaking | Ice maker won’t dispense ice | Ice maker dispenses too little ice
This part works with the following products:
Refrigerator, Ice Maker, Wine and Beverage Cooler.
Part# 4317943 replaces these:
AP2984633, 1857, 4317943, 4210317, 4211173, 4317943, 4317943R, 4317943VP, 46000978556, 46004211173, 480616, 480617, 482014, 482015, 482016, 482017, 482018, 482019, 482020, 482394 , 482433, 482990, 625601, 625603, 625610, 625611, 625622, 625625, 625653, 625656, 625660, 626002, 626201, 626237, 626366, 626461, 626489, 626608, 626609, 626626, 626636, 626640, 626670, 626687, 627572, 68972-4, 797991, 8114, 833701, 978552, 978553, 978556, 99989730, IC14B, M626687, W10122496, W10190952, W10281545, W10632400 Show less
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
222 Reviews
4.8
Filter By Rating:
  • 5 Stars
    190
  • 4 Stars
    22
  • 3 Stars
    4
  • 2 Stars
    1
  • 1 Star
    5
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 215 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Ice maker stopped working
Our ice maker had been overfilling and causing a big block of ice in the bin for some time, but it finally stopped working completely. In trying to determine the problem, I read the comments on the PartSelect website from other customers and thought I needed either a new valve or a new ice maker. I replaced both because when I took the old ice maker out, it had a lot of mineral deposits in it and looked very unappetizing. The videos on how to replace the valve and ice maker were very helpful. Other customers comments on replacing the valve were also great. The only thing I would add is that after getting the parts installed and the water line and electricity reconnected, it takes an hour or so for the ice maker to to fill. I suppose there is a temperature sensor that won't fill it until gets down to a certain point. I am very pleased with the outcome of this project on our 28 year old refrigerator.
Other Parts Used:
Refrigerator Single Water Inlet Valve Replacement Ice Maker
  • Martin from DESOTO, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The ice maker only make two cubes of ice per tray
I replaced the old icemaker with a new one but the problem is still occurring in the new one. It only fill with enough water to make about two ice cubes
  • Clinton from EUSTIS, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped working. Thought it might be the timer. Actually teflon coating coming off.
Removed the ice maker. Used a small mirror (wife's make up mirror) to find the screws. Inspected and found most teflon coating missing. Ordered new ice maker and installed. Works perfect.
  • David from NASHUA, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
freezing water tube and frozen rotation bar whuch caused water to overflow and freeze inside freezer.
put arm up to stop icemaker from creating new ice cubes. us nut driver to unscrew 3 of the nuts holding icemaker in place do not completely remove the 2 top screws. lift off the screws and unplug from inside wire connection...make sure water tub is removed and frig unplugged. clean off ice anywhere inside freezer...take out new icemaker and connect wire plug...attach icemaker on to the 2 top screws...use nut driver to tighten into place. add and tighten bottom screw...leave arm down...replace clean and dried water tube into back and make sure it slid into ice maker...tighten screws in back and attatch water hose to tube...plug frid back on slide back into place...will start making ice in an hr or so....
  • Donna from CUMBERLAND, RI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old ice maker didn't work
3 screws and plugged in the new ice maker. It was slightly difficult to unplug the old ice maker and place the plug in the new ice maker. Still really easy. New ice maker works great!
  • Peter from SKANEATELES, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace ice maker
Replace was very easy. Just undid three small bolts from freezer and old unit came straight away. Disconnected wiring, and just reversed the process with the new unit. After about four hours, the unit kicked in and started making ice. The only difficult part was reaching into the freezer as space was limited in this model (side by side freezer/fridge doors).
Other Parts Used:
Refrigerator Dispenser Overflow Grille Replacement Ice Maker
  • Andrew from ROCKY POINT, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace ice maker
Pullout the broken ice maker and replaced with new unit. Repair went smooth
Other Parts Used:
Refrigerator Crisper Drawer with Humidity Control Replacement Ice Maker
  • Pam from Geneva, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Ice
I watched the demo on how to replace the ice marker and it was that simple. I removed three screws and unplugged it from the freezer. The difficult part was removing the wire on, off switch. You must pull it out carefully. It is a sung fit.
  • Dennis from OAK LAWN, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker did not make ice
Ordered new ice maker from this site . Installation was very easy. Was happy to see that many electrical plugs were included. Chose the correct electrical plug and installed in 30 minutes. One note, be patient as it takes a while for ice maker to produce ice. When I heard the sound of ice dropping in the bin, I was very happy. Just in time for summer cold drinks. :)
  • Alfred from CANTERBURY, CT
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Could not get the replacement Ice Maker back on the top brackets...
Removal was easy...Removing and installing arm was a bit difficult...Called a service man to install...He also had a bit of difficulty, but had it done in less than 45 minutes... He mentioned that my brackets had a different set up than most...
  • wilfried from LAKESIDE, CA
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

102 questions answered by our experts.
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alan
September 23, 2017
Ice maker is not making ice. It does not appear water is going into the tray area, yet water is coming into the refr. As you can still use the water glass fill, at the door. I could always order a new ice maker, but hate to do same, removing and installing a new one and finding the problem is elsewhere. Help!
For model number ed2chqxkq05
PartSelect logo
Hello Alan, thank you for contacting us. That sounds like it would be the icemaker control assembly. This part controls all the ice maker functions as well as the solenoid which controls the water flow to the ice maker. When this fails you will still get water to the dispenser as the water inlet valve still works properly. Hope this helps!

82 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Rudy Burger
December 5, 2017
How do i set the water level in my ice maker
For model number 4317943
PartSelect logo
Hello Rudy, Thank you for your inquiry. The ice maker has an adjustment screw that needs to be turned to set the water level. Remove the cover of the icemaker. The adjustment screw is on the right side of the control module. Turn the screw clockwise to reduce the water level, but no more than 2 complete revolutions. Hope this helps you!

28 people found this helpful.

Was this helpful?
Thank you for voting!
Cameron
May 1, 2018
My ice maker stopped producing ice. I thought it had to do with the arm not initiating the ice making mechanism, as i believe i tinkered with it a bit and it worked for a little bit more. Also i just realized there is no water coming out of the water dispenser (it has always been pretty low flow, perhaps a filter issue). Any suggestions? Do i just get the replacement ice maker or could the issue have to do with water?
For model number Whirlpool ED5HEXNB00
PartSelect logo
Hello Cameron, thank you for your question. It sounds like you may have a water flow issue. If the water is slow to the dispenser, and the icemaker wasn't work, then was tinkered with and worked for a bit more the water may not be coming into the icemaker enough to make the ice. I would suggest replacing the Water Inlet Valve Part Number: W10408179 and perhaps the filter, if it hasn't been changed in a while. If the issue continues with the icemaker, we would recommend testing the icemaker to determine if its an issue with the motor module, which is basically like the timer for the icemaker. It calls for ice, allows the water to freeze, activates the dump cycle then calls for more water. I hope this helps!

13 people found this helpful.

Was this helpful?
Thank you for voting!
Cynthia
September 16, 2019
Ice maker makes the ice but won’t dispense it. Then it turns the ice in the ice maker to become a solid iceberg. Could this be the points and/or the module? Help!
For model number ED25DQXAW00
PartSelect logo
Hello Cynthia, Thank you for the question. I suggest removing the Ice Bin and check it over for any damaged parts. Also make sure there is no ice build up preventing it from dispensing ice. If the parts are all good but the dispenser motor in the ice bin is not working to turn the auger, it may need to be replaced. PartSelect Number PS11739113. Hope this helps!

12 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Gerard
February 26, 2020
Ice maker 4317943 stopped making ice. I get water from dispenser and also when I close the circuit on the module so I think the water valve is ok. The tray and heater are in good shape. The strange thing is if I fill the tray with water eventually it will make cubes. Also the thermostat test ok. I replaced the module and no change. Any thoughts?
For model number 106.57071791
PartSelect logo
Hello Gerard, Thank you for the question. The Valve has 2 ports, for the ice maker and the water dispenser. It is possible the Valve could be defective. You can check with a multi meter to see if there is power going to the water valve when the icemaker cycles. Please see the link below for help testing a Water Valve as well. We hope this helps. https://www.partselect.com/Refrigerator+test-water-valve+repair.htm

9 people found this helpful.

Was this helpful?
Thank you for voting!
John
September 10, 2017
Ice maker does not shut off when arm is lifted
For model number KTRA22EMSS04
PartSelect logo
Hi John, Thank you for your inquiry. You would have to replace your icemaker to fix this issue. Good luck with your repair.

9 people found this helpful.

Was this helpful?
Thank you for voting!
Terry
August 8, 2018
I'm having problems with ice maker or in that area. What tells the water to shut off after it fills tray, is there a sensor in ice maker? The problem is water is not shutting off sometimes and makes a frozen waterfall in freeze (what doesn't hit the hardwood floors) thank you
For model number jrsd2490t
PartSelect logo
Hi Terry, Thank you for your question. There would be two parts that could cause this issue. It is either the ice maker is calling up too much water, or the water inlet valve is sending up too much water. I would suggest testing your water inlet valve first, to make sure it is not malfunctioning. If that part is fine then it would be your ice maker that is the problem. I hope that helps. Good luck with your repair.

9 people found this helpful.

Was this helpful?
Thank you for voting!
Cathy
January 30, 2018
Hi - the part to my icemaker that guides the water into the dispenser is broken in the sense that the plastic detached from the holder, but I can and have manually put it into its proper place and it continued to work. I think my husband knocked it loose and then water went all over the insides of the freezer. I was worried that something inside was broken because I found a bit of water on the floor. I'm sorry to say i have a very dirty water filter that needs replacing. Could a dirty filter cause a water backup problem? Additionally, the water pan under the refrigerator does not have any water in it, but when I looked in there today, after I had shut off the water supply to the refrigerator, there was something that resembled black dirt in the tray. I wondered if there would be any sort of rubber or spongy material insulating anything that could have crumbled into the tray from being dry or frayed from age? Thanks for any direction with this!
For model number KSCS25FJSS01
PartSelect logo
Hi Cathy, Thank you for the question. The inlet tube just pushes into place so it may have just been bumped.If you were able to reinsert it and it is working then you will be fine. If the filter needs to be replaced the water flow will be slow or stop and it can cause a leak. The dirt in the tray could just be dirt. The fan helps evaporate the water in the try so it is normal not to see water sitting in the tray.There is no foam or filter in the tray to absorb or insulate. Hope this helps!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Kenneth Miller
February 10, 2018
How long dose it take this ice maker to fill tub
For model number whirlpool 4317943
PartSelect logo
Hello Kenneth, Thank you for your inquiry. It can take about 24 hours for it to start producing ice, and since it usually dumps around every 1-2 hours, it can take 24 to 48 hours to fill the ice bin depending on the side. Hope this helps!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Rudy
August 15, 2017
How can i adjust the water into my ice maker?
For model number PS358591
PartSelect logo
Hello Rudy, that is a great question. The ice maker control board would have a solenoid in it, this controls the water flow to the ice maker to keep it from over flowing. Hope this helps!

7 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS358591
Manufacturer Part Number: 4317943
Brand
Model Number
Description
Kenmore
1061105299
Ice Maker
Kenmore
10647021790
Refrigerator
Kenmore
10647021791
Refrigerator
Kenmore
10647022790
Refrigerator
Kenmore
10647022791
Refrigerator
Kenmore
10647028790
Refrigerator
Kenmore
10647028791
Refrigerator
Kenmore
106482394
Ice Maker
Kenmore
10648562893
Refrigerator
Kenmore
10650022000
Refrigerator
Kenmore
10650022004
Refrigerator
Kenmore
10650027001
Refrigerator
Kenmore
10650027002
Refrigerator
Kenmore
10650027003
Refrigerator
Kenmore
10650027004
Refrigerator
Kenmore
10650032000
Refrigerator
Kenmore
10650032003
Refrigerator
Kenmore
10650032004
Refrigerator
Kenmore
10650037000
Refrigerator
Kenmore
10650037001
Refrigerator
Kenmore
10650037004
Refrigerator
Kenmore
10650202991
Refrigerator
Kenmore
10650202992
Refrigerator
Kenmore
10650202993
Refrigerator
Kenmore
10650203993
Refrigerator
Kenmore
10650209991
Refrigerator
Kenmore
10650257000
Refrigerator
Kenmore
10650257001
Refrigerator
Kenmore
10650259001
Refrigerator
Kenmore
10650259002
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service