Power Cord Kit

Hi Bruce, Thank you for your question. Your electrical box should be located behind the kickplate of your machine on the bottom right hand side. Good luck with your repair.

Hi Jim, this would be a question for the store/seller you bought the unit from. Thank you for your question and good luck with your repair!

Hello Janet, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS972325. Thank you for your inquiry, good luck with this repair!

Hi James, Thank you for the question. To install this power cord you will need to turn off the water and unplug the appliance. You will then need to remove the front bottom kick plate panel to expose the water valve to remove the fill hose from the valve and the drain hose. You will then need to remove the screws at the top front that mount the dishwasher from the counter top. Then you can adjust the leveling legs to a lower position ans pull the appliance out to gain access to the back of the appliance. At the bottom corner you will see a box held closed by a screw. Open up the box and disconnect the wiring for the power cord. There is a washer with tabs around the hole for the power cord wiring. You can loosen it by pushing the tabs with a flat head screw driver and then unscrew it completely. Once the washer is removed you can pull the power cord out from the hole at the back of the box. Insert the new cord through the hole and reattach the washer with tabs. Reattach the wiring and close up the box. Reverse the steps for the hoses and mounting the appliance. Hope this helps!

Hello Simon, Thank you for the question. Very sorry but we do not have the specs of the Cord, we just have the parts lists and diagram and can guarantee the PartSelect Number PS358548 is the correct cord for this model and will be the same cord that came with the appliance with the same Specs. We hope this helps!