354898-1-M-Whirlpool-4162660 -Door Strike and Latch Kit
Part Location Diagram of 4162660 Whirlpool Door Strike and Latch Kit
See part 28 in the diagram
( Grid squares measure 1x1 inch )
354898-1-S-Whirlpool-4162660 -Door Strike and Latch Kit 354898-2-S-Whirlpool-4162660 -Door Strike and Latch Kit 354898-3-S-Whirlpool-4162660 -Door Strike and Latch Kit Part Location Diagram of 4162660 Whirlpool Door Strike and Latch Kit
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Door Strike and Latch Kit 4162660

 Fits your KCS180S1!

Rated by 2 customers 

A Bit Difficult 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 53.71
  Special Order
Get FREE EconoShip on orders over $100! T&C apply
 Fits your KCS180S1!
PartSelect Number PS354898
Manufacturer Part Number 4162660
Manufactured by Whirlpool
Product Description

Door Strike and Latch Kit Specifications

This kit includes both the old and new style in one kit. The old style is metal with springs and the newer style is a metal plunger and plastic catch. This part helps keep the door shut.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Trash Compactor.
This part works with the following products:
KitchenAid.
Part# 4162660 replaces these:
AP3015893, 3217, 107097, 107098, 113686, 4160788, 4160789, 4161210, 4162024, 4162025, 4162659, 4162660
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.3 / 5.0, 2 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
transmission drive belt broken
Since the belt broke, I had to put the cogged belt on the large driven pulley first, after loosening the four motor mount screws, and sliding the motor as close to the driven belt as I could. After several tries, I positioned the belt successfully on the driven pulley, then slipped it over the pulley on the motor. I pulled the motor as far away from the driven pulley to put proper tension on the belt without being excessive. I snugged the four motor mount bolts, tested the compactor and after a successful run, tightened the bolts on the motor mount. I then replaced the latch assembly, two screws and it was done.
Read less
Other Parts Used:
Door Strike and Latch Kit Drive Belt
  • Luke from Port Clinton, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top door of machine would not latch
Replaced the old latch knob and installed the new one by twisting it in by hand . That was easy. The part in the door itself was not holding the new latch knob. I tried unsuccessfully to take the door apart to install the new part that goes in the door and grabs the knob. When that didn't work, I stuck what looked like an alternative to replacing that part into the old part. It was a flexible part that was supposed to catch the knob. That worked for a while and then came out. Unfortunately, I'm back to putting a piece of cardboard between the door to make it stay up.
Read less
  • Marcia from Prairie Village, KS
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS354898
Manufacturer Part Number: 4162660
Brand
Model Number
Description
KitchenAid
4KUCS181T0
Trash Compactor
KitchenAid
KCS180S1
Trash Compactor
KitchenAid
KUCS180S0
Trash Compactor
KitchenAid
KUCS180S1
Trash Compactor
KitchenAid
KUCS181B0
Trash Compactor
KitchenAid
KUCS181D0
Trash Compactor
KitchenAid
KUCS181T0
Trash Compactor
KitchenAid
KUCS181T1
Trash Compactor
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Door Strike and Latch Kit
$ 53.71
  Special Order
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.