Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Gary C - June 22, 2023
Verified Purchase
Easy repair - great part - great service
The part arrived in a timely manner and was in excellent condition. My refrigerator was back working within 15 minutes!
The service from Part Select has ALWAYS been great!!!
★★★★★
★★★★★
Gary L - October 1, 2020
Verified Purchase
Gl , replaced , easy install
What I didn’t like was the part was not in a box and the terminals were bent , I worked it out and installed unit .
★★★★★
★★★★★
JONATHAN G - June 1, 2020
Verified Purchase
Easy Repair , Great Part
Everything worked as expected, no issues!
★★★★★
★★★★★
Glenn S - February 12, 2020
Verified Purchase
Exact fit great shipping time
Water quit comming out of our refrigerator after some checking discovered the water valve was corroded and not functioning thanks to PartSelect we were able to find a direct fit replacement that repaired the problem works like new very satisfied
★★★★★
★★★★★
Grant S - July 26, 2019
Verified Purchase
good part that fit perfectly
received quickly and in good condition. My refrigerator has water and ice again now.
★★★★★
★★★★★
Frank D - November 27, 2018
Verified Purchase
perfect fit, as advertised
Fast delivery, and works as intended
★★★★★
★★★★★
Carolyn R - July 24, 2018
Verified Purchase
Great parts, great price
The RIGHT part ( which helps a lot), arrived quickly, and good price.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 7 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replacement water valve.
Easy job. Just don't get the parts from this place. First part was no good and delivered was past deadline after I paid for expedited shipping. Had to get new part delivered which in three days increased in price and then still waited for ten days WITH expedited shipping. Have not been reimbursed for first part that was no good AND my
... Read more expedited shipping fee. Shop somewhere else.
Read less
Christopher from MECHANICSBURG, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water dispenser not working
Removed back panel and water inlet valve and replaced with a new water inlet valve
Michael from BRAINTREE, MA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water inlet valve was leaking
0) Look on the internet for a DIY/or pro-shop Video 1) Pull the refrigerator away from the wall, unplug the power cable 2) Shut off the water at the wall valve 3) Disconnect the water line at the inlet valve on the refrigerator (lower corner, right side), this is a threaded pipe fitting requiring a small open end wrench
... Read more />4) Remove the lower rear panel 5) Remove the water inlet and distribution valve assembly, there is one sheet-metal screw holding the assembly to the back edge of the refrigerator. 6) Carefully pull the assembly out of the back of the refrigerator, leave the distribution water lines attached, note the orientation 7) Disconnect the electrical connectors, note the orientation/types 8) Disconnect the water line from the inlet valve, remove the retaining clip, then pull out the line. Note - a small metal star shaped tube fitting may come out with the valve, this is fine and will not be used again. 9) Remove the inlet valve from the assembly (there are two small sheet-metal screws that are very tight, the correct/precise size, good quality Philips head screw driver is necessary or use a small set of vice-grips to grab the head of the screw) 10) Attach the new valve to the valve assembly, connect the electrical connectors, note - at the plastic refrigerator water line that connects to the inlet valve, trim/cut a small section off the end of the water line before connecting it to the valve. This will provide a fresh interface for the connection. Push the line in firmly and then install the retaining clip. 11) Perform a quick functional check before putting everything back together - Attach the water line from the wall, turn on the water, attach the electrical connectors, plug in the refrigerator power cable and test for operation and leaks. 12) Assuming no leaks/operational issues, unplug the refrigerator power cable again, turn off the water at the wall, disconnect the water line at the inlet valve and reinstall the valve assembly and rear panel. Reconnect the water line and plug in the power cable and you should be good to go.!
Read less
JONATHAN from ROSWELL, GA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water valve had scaley stuff all over it. Needed changing
Remove back door and then shut water of to the refrigerator. Then remove old valve. Have towel ready for excess water when you remove nut to valve. Install new valve screw to refrig. Turn on water and check for leaks.
Darrell from SNELLVILLE, GA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our refrigerator was not dispencing water or ice.
Turned of water to refrigerator and unplugged refrigerator. Removed the water line from refrigerator. Removed back panel. Removed mounting screw from the water valve, Unhooked wire harness from valve and removed the water line on back of valve. Reconnected wiring harness to new valve, reconnected water line on back of valve. Replaced the
... Read more back panel to refrigerator and put the water line back on the new valve. Turned on water valve and checked for leaks. It's now dispensing water and ice.
Read less
Nancy from NEW ALBANY, IN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
10 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pump for ice maker leaked.
Easy repair. Unplugged refer. Took back cover off with screwdriver. Unscrewed the support for the pump. Unhooked water lines from both ends of bad pump. Pulled electrical line off the old pump. Put the support on the new pump, hooked up lines, and electrical plug and screwed the pump to the frame. Put the coever back on unit. Plugg
... Read moreed back into wall. Worked immediately.
Read less
Thomas from Orlando, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace water valve
I waited for 2 weeks for a professional appliance repairman to fix my water leak. He kept telling me he was trying to get the part. I finally gave up on him and ordered the part online. Only took a few minutes for the repair. Got the part via mail in 3 days.
Gary from Sanford, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tamara
December 19, 2017
First we had a problem with the back plate getting stuck - where you press your cup against to dispense water. The water kept flowing until we opened refrigerator door or got the plate unjammed. A few months later the secondary 1-inch sized water dispense button started getting stuck in the on position. Finally we had to turn off water because it wouldn't stop flowing and shooting on to the floor.
For model number LMX25984ST
Hi Tamara,
Thank you for your question. If the button is getting stuck I would try replacing it if that what was causing the the water to flow continuously. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lori
December 13, 2019
The replacement water intake valve has only two wire leads whereas the old one has 4 wires. What to do?
For model number Lfx25960
Hello Lori,
Thank you for your question. The correct water valve with four wires for your model is under part PS3527439, the valve you have will not work with your specific model. We hope this helps!
