Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Reshad G - September 23, 2021
Verified Purchase
Broken handle
The part was exactly what I needed. Arrived fast. Everything worked out well.
★★★★★
★★★★★
Randy S - May 19, 2020
Verified Purchase
Jack of all trades
Just what I needed.
★★★★★
★★★★★
Lester C - June 3, 2019
Verified Purchase
Great part, get someone to help
The part was of good quality and exactly the one I needed. Replacing it isn't difficult once you figure out the trick (hold the lock and spring in position before closing the cover), but it's much easier if someone else helps you.
★★★★★
★★★★★
Aaron C - April 17, 2018
Verified Purchase
medium repair
The part was pretty easy to replace. The hard part is you have to put tension back onto the springs which I haven't seen anyone mention. Once you have it all put back together you need to position the springs so they press against the two towers then kind of push the door and and it will keep the tension. Hope that helps someone took me awhile to figure that out.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.3 / 5.0, 4 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken Handle
Removed the door by undoing two hex nuts. Then removed the plastic cover over the glass and attached to the metal door frame. Broken part easily came out. But putting back together took two phone calls to you and finally getting the video from you that showed that the tension on the door spring was induced by the attachment of the outer p
... Read morelastic piece. The the spring worked as it should and I could easily return the door to it's place on the machine. I now know how to fix this when it breaks the next time.
Read less
Jeff from LOS ANGELES, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door handle broken and need to be replaced.
After reading thru previously posts by other people, I started: 1) Took pictures of inside door, the hook that involve with the handle and the hinge. So they would be very helpful as needed later. 2) Removed the whole door from the combo and lied it down, 3) Disassembled the door and took a few more pictures, 4) Repla
... Read moreced the handle, 5) Took a look at the picture of the hook in (1) then jammed the hole with a piece of card board that cut to fit the hole. Used tape to secure the card board. Made sure the hook was secured/tighten. (This step is very important because it will make the spring works with the handle properly later!) 6) Reassembled the door, 7) Removed the card board from the hole in step (5). If the hook was tighten as before you start, it will be ok. Meaning the spring was resting properly on the inner door behind the handle (If the hook is not tighten then you have to redo steps (3), (5) and (6) again), and 8) Made sure the handle and the hook were working properly. I think If you follow the steps above it will be easier and faster to replaced the handle!
Read less
Adisak from BROOKLYN, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
BROKEN HANDLE
It's easy, I removed the two bolts that hold the door hinge on, placed the door on a protective surface, removed the screws that hold the cover on, remove the cover, take the old handle and spring out , replace with the new part and reverse the assembly.
Steve from LAND O LAKES, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original handle broke off
My husband couldn't fix it. We called our Handiman/repairman. He had a difficult time and took 2 hours. $197.00 charge. This handle does work better than the original.
Janet from RESTON, VA
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Wrench (Adjustable)
2 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
December 17, 2019
Installing the handle. Read the comments. When i took the old broken one out the part that holds the rocker pin to the catch pin was broken so i had to order the inner door assembly. How does the pin go back in without breaking the plastic housing that holds it in place. Looks like you just pressure it in and hope the plastic doesn't break. (very cheaply built). Also, how does the spring go in to create the tension? It doesn't look like it can be assembled too many ways.
For model number WM1377HW
Hello John and thanks for writing.
For your convenience, we have attached the link to your manual with repair instruction. We hope this helps. Good luck with your repair
https://www.manualslib.com/manual/807521/Lg-Wm1377hw-Series.html
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bill
February 2, 2018
I need instructions for reinstalling the handle assembly
For model number MEB61281101
Hi Bill,
Thank you for your question. Unfortunately the manufacturer has not offered installation instructions for this part but we do have another customer who wrote in with how they installed the part: "It's easy, I removed the two bolts that hold the door hinge on, placed the door on a protective surface, removed the screws that hold the cover on, remove the cover, take the old handle and spring out , replace with the new part and reverse the assembly." I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
