This overfill sensor is for washers and sensor detects when water splashes out of the tub.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer, Washer Dryer Combo.
Part# EBD50360202 replaces these:
AP5211167
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
February 12, 2019
Washing machine will not drain. We have already put in new pump. What does this sensor do or what other part could it be. Machine runs normal just won't drain. Thanks
For model number 31523210
Hello Tim, Thank you for contacting us. I suggest checking the following parts: PS3529177 Switch Assembly,Sensor, and PS8751171 SWITCH ASSEMBLY. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Phil
November 14, 2019
My LG washing machine on the bulky/bedding cycle just keeps filling the tub with water regardless of how small the load is, and will overflow at times, what part needs replacing to ensure the water stops at the appropriate level. Thanks for your assistance.
For model number LG WT4970CW
Hello Phil, thank you for your question. We would recommend testing the pressure switch PartSelect Number PS3529177 and the water valve PartSelect Number PS6448324. Please enter the part number into the site for current price and availability. Good luck with your repair!
Was this helpful?
Thank you for voting!
Jason
March 15, 2022
Washer is getting an OE code at last 12 mins of wash and will not drain. Drain pump is working properly. The overflow sensor has no continuity while wet or not. Could this cause this issue.
For model number 79629272001
Hello Jason, Thank you for the question. The most common cause for the OE Error Code is a clogged filter or drain hose. We suggest checking for clogs that are slowing the water flow when draining. The water can still drain, just at a slower rate so it is not finished before the end of the cycle. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Lisa
August 30, 2022
Water does not shut off. Continues to run. Flooded laundry room. Had to shut water off going to washer. The control panel was not lit up when this happened. Like to wash was complete.
For model number WT1701C
Hello Lisa, thank you for contacting us. The water inlet valve (part number: PS3527446) defect is mostly responsible for such overflows. It is the part that controls the flow of water to the washer. The second most probable cause can be the washer overfill sensor that turns off the flow automatically when the water splashes out of the tub. We hope this helps, please feel free to reach out to customer service if you need any help regarding the purchase or repair. Thank you!
