Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bradford E - April 2, 2022
Verified Purchase
Piece of cake!
Everything was great...the part was a perfect match, went in easy even for a dope like me. Works like a charm, no more leaks.
★★★★★
★★★★★
THOMAS J - October 29, 2021
Verified Purchase
no problem
installed easily and functioned with no problem
★★★★★
★★★★★
Matthew L - October 1, 2020
Verified Purchase
Quick repair
Thank you , thank you so much! Being able to do certain repairs on your own is so wonderful and cheap!
This worked and happy to have ice again!
★★★★★
★★★★★
Norm K - November 20, 2022
Verified Purchase
Ice Marker H2O Valve
The valve arrived promptly just a little pricey it fit like a glove & worked as advertised Thanks
★★★★★
★★★★★
Carl B - July 21, 2018
Verified Purchase
Valve assembly for ice maker
Part was identical to the original. We are making ice again. Part installed in about a half hour.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice maker not working but making a sound when turned on (buzzing). Water valve not functioning when tested with a multitester (multimeter).
I removed the old water valve, disconnected the water tube going in and tube going out to the back of the refrigerator. New water valve bracket different than the previous one which resulted in my having to modify it to fit. Not an easy task as it was preformed metal. Once hooked up, water turned on, and ice maker turned on, the sound
... Read moreI'm getting now is clunking and not making ice. My debate is whether or not to purchase a new ice maker or revert to the tried and true method with ice trays which work every time.
Read less
shirley from FLORISSANT, MO
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench set
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donald
April 4, 2018
Listing shows 2 water valve replacement parts how do i know which one i need
For model number Lfc20740sw
Hello Donald, thank you for your question. The water valve assembly comes with a main valve and secondary valve. You can test the valves using a multimeter to verify which one has failed. The manufacturer part number for the valve is part number AJU55759303. Here is some information on testing the valve:
Locate your water inlet valve, it is typically located behind a refrigerator. Gently pull your refrigerator away from the wall. You may want to place scraps of carpet, of some other soft material below the fridge to prevent damage to the floor. Turn of the water valve's water supply by closing the shut-off valve in the waterline leading to the water valve.
Place a container under the valve to catch any water that may spill from the water valve and its fill tube. Remove the water valve's fill tubing. Loosen the flare nut on the brass fitting that is found on the inlet side of the water valve. You can use a wrench to loosen the flare nut.
Your water inlet valve is held in place on your refrigerator by means of a metal bracket. Use a screwdriver or a nutdriver to remove the screw that holds the water valve's bracket to the refrigerator cabinet. Gently pull the water valve out of the cabinet, and remove the tube from the outlet port.
There are two wires connecting to the terminals of your water inlet valve. If yours is a double solenoid water valve, it will have four wires. Be sure to label each wire so that you know where to reconnect them later. Firmly grasp the metal connector of the wires in order to remove the wires. You may need to use a pair of needle-nosed pliers. Do not pull on the wires themselves.
Set your multitester to the R X 1 ohms setting to test for continuity. Place each of the multitester's leads on a terminal. Your multitester should display a reading between 200 and 500 ohms. Closely examine your water inlet valve. The exact ohm resistance rating you should test for may be marked on the valve.
If the test you conduct with your water inlet valve does not produce these results, then you should replace the component.
13 people found this helpful.
Was this helpful?
Thank you for voting!
Mary
February 25, 2018
Will this part fix the jackhammer sound when ice maker is filling?
Hello Mary, thank you for your question. The issue might be the water inlet valve, or the water filter housing if your appliance has a water filter option. I would recommend checking the filter, filter housing, and the water inlet valve. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jeff
February 17, 2018
When i turn on the ice maker all i get is water running through it. Does not make ice.
For model number 795.78093.901
Hello Jeff, Thank you for your inquiry. Check the freezer temperature first to make sure it is at least 15 degrees Fahrenheit. Next, test the temperature sensor/thermistor and the defrost thermostat with a multimeter to see if they have continuity. If they test ok, you may need to replace the ice maker assembly. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Helen
January 15, 2019
If this part doesn't fit is it returnable?
For model number aju55759303
Hi Helen,
Thank you for your question. We have a 30 day return policy. Here is a link to our policy, https://www.partselect.com/Thirty-Day-Returns.htm. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Curtis
August 22, 2019
Will this part fix the ice maker to make ice? Ice maker just stopped making ice. Is there a filter for ice maker?
For model number LFC20770ST
Hi Curtis,
Thank you for your question. If the ice maker is not making ice, then the water inlet valve is one of the parts you will need to check. You will also need to check the ice maker. You will need to test the parts with a multimeter. Here is a link to one of our videos on YouTube that you may reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Cheryl
August 27, 2019
Water doesn’t stop filling ice tray. Does the fill valve need replacing?
For model number 79579009901
Good Day Cheryl. Thank you for your question in regards to your unit (Model Number 79579009901). Based on our research you may need to replace the Water Assembly Valve (PartSelect Number PS3533114). You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Francis
November 11, 2019
On this solenoid there are 2 posts one has 2 wires one has 1 wire what is the correct connection procedure with the valve in position 2 wires on the right or left
For model number AJU55759303
Hi Francis, from what I am understanding , the correct answer would be that the it does not matter where the two wires on the valve assembly. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Keith
May 26, 2024
My ice maker is making ice but clumps together after its in the bin, is this a water valve issue and where is the valve?
For model number LFC25765ST
Hi Keith, thank you for the question. Based on our research, the issue is not with the water valve. If the ice bin is not regularly cleaned, ice particles can build up in the ice bin and can cause clumping. You may need to clean the ice bin with water and a soft cloth. If the issue persists, we would recommend replacing the defrost sensor assembly, part number PS3636324. We hope this sorts out your problem!
