Door Switch

Hello Deborah, thank you for your question. We would recommend testing the door switch, PartSelect Number: PS3529308 to see if that fixes the issue. If it does not, it could be an issue with the timer switch. The timer is built into the control board on this model, PartSelect Number: PS3646019. It is not repairable so it will need to be replaced. I hope this helps!

Hello Biran, thank you for your question. The first part we would recommend testing/replacing is the door switch. If this doesn't activate the unit will not start its cycles. The door switch for this unit is PartSelect Number PS3529308. I hope this helps!

Hi Akin, Thank you for your question. I would suggest first checking your door switch and your thermal fuse to make sure they are working correctly. They can also cause your appliance to not work. If they are working correctly then it may be your control board that is your issue. I hope that helps. Good luck with your repair.

Hello Cy, Thank you for contacting us! I suggest checking the following two parts: PS3529308 Door Switch and PS3530485 Thermal Fuse. Good luck with your repair!

Hi Joyce, thank you for your question. It does sound like you may want to check your door switch for being the issue. However for no heat issues you might want to check these parts as well: The first parts to check in this case would be all of your thermostats and thermal fuses. You can test those parts with a multi meter and they should be reading 0 ohms to be working correctly. If those parts are fine, you should then go on to testing your heating element as well. You can also test that with a multi meter and it should be reading between 0 - 50 ohms. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. I hope that helps. Good luck with your repair.

Hello Susan, Thank you for the question. The most common part to replace would be the Thermal Fuse, PartSelect Number PS3530485. This thermal fuse acts as a high-limit thermostat, and shuts off the heating element when the dryer overheats by cutting off power to the dryer. If the thermal fuse has blown, the dryer will not start. These fuses cannot be reset, so if yours has blown, you will need to replace it. A common reason for the thermal fuse to blow on a dryer is if the exhaust vent on your dryer is restricted or blocked. Hot air will be confined in the dryer and the fuse will trip and stop the electricity from flowing to the gas valve or heating element.Thank you for your inquiry, good luck with this repair!

Hi Josh, Thank you for your question. Yes, in this situation the issue is with the door switch and it will need to be replaced. I hope this helps. Thank you and have a great day!

Hello Tanner, Thank you for the question. If the door is not staying securely closed, I suggest checking the PartSelect Number PS3522843 Locker and the door strike, PartSelect Number PS3522825. Hope this helps!

Hello Timothy, thank you for inquiring. This is due to either a faulty Door Switch, this part number PS3529308, or Thermostat part number PS3530484 for your model. Good luck with your repair!

Hi Alicia, Thank you for the question. This sounds like an issue with the timer switch. The timer is built into the control board on this model, PartSelect Number: PS3646019. It is not repairable so it will need to be replaced. Hope this helps!