The interior light in your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, or stays on when the door is closed, you could have a faulty switch. The switch is spring-loaded and is a generally closed type of switch meaning there should be no continuity when the button is pushed, and continuity through the switch when it is no longer engaged. This plastic, white, OEM switch is sourced directly from the manufacturer, is sold individually and is easy to replace. The repair usually takes less than 15 minutes and requires a flat-blade screwdriver and needle-nose pliers.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Light not working
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
LG, Kenmore.
Part# 6600JB1010A replaces these:
AP4442090, 6600JB1010A
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peter
November 4, 2019
How do i remove the old switch ?
For model number 795 76203 901
Hello Peter, thank you for your question. First unplug the appliance. Take a small flat head screwdriver and get in between the liner and the switch. There is a tab that you will release on the switch the light can be pulled out, the wire harness disconnected and the new part installed. I hope this helps!
20 people found this helpful.
Was this helpful?
Thank you for voting!
Ruth
November 16, 2017
The light in fridge is not not working at all.If I push the inside gizmo and hold it for a while....maybe the light will come on but it won't stay on.How do I know if it is the light bulb or the mechanism that fits in the place that I push to try to activate the light.How do I problem solve to know the exact thing to order?
For model number 79576202901
Hi Ruth , Thank you for the question. The only way to know for sure what part is defective before placing an order is to test the switch and the socket with an Multi Meter and check for continuity. If the light eventually turns on, it is mostly likely the light switch. If the bulb or socket were bad they usually would not turn on at all. Hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
John
August 1, 2017
Does this part fit my refrig? My existing switch as a pointed tip much like the end of a dowel. Please advise
For model number kenmore 795.77573600
Hi John,
Thank you for the great question. There are two switches listed underneath your appliance. Part number PS3529282, is listed as 402A in your diagram. This part is grey and does have a dowel like tip. If you search the part number in our website you will see a picture of the part. You also have part number PS3529268, which is listed as 406B in your diagram. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Jason
August 9, 2019
I am looking for a filter on the ice machine, where is it located?
For model number 79576203901
Hello Jason, thank you for your question. There is not filtration system on this unit. The water goes to the icemaker directly from the water valve. I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
JUDY
April 15, 2018
The frige is working good as far as cooling and freezing. There is a continual 3 beep alarm when i open the door to the freezer or refrigerator sometime the lights are off i can close the doors and the lights will come on but the beeping continues.
For model number LRBC20512WW
Hello Judy, thank you for your question. The alarm and lights issue could have something to do with the door switches. I would recommend testing the Switch,Push Button 6600JB1010A to see if they are faulty. The switch is spring-loaded and is a generally closed type of switch meaning there should be no continuity when the button is pushed, and continuity through the switch when it is no longer engaged. This can be tested with a multimeter. If the switches are tested and are working properly, the issue is probably with the electronic control board in the unit. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
John
December 10, 2019
Both lights in refrigerator section, as a pair, either work, or not, when door is opened. A couple of years ago this same phenomenon happened and after a couple of days seemed to fix itself. Now, it's back and it's been with us two days now. Also, when these episodes occur, there is a mild electrical smell. Don't think it's the bulbs. Your thoughts?
For model number LFX25950SW
Hello John, thank you for your question. It sounds like the sockets may need to be replaced. We would recommend removing the bulbs, and inspecting the sockets for burns or breaks in the wires. PartSelect Number PS3529355 that is the part number for the socket assembly. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Pam
July 19, 2021
I’ve replaced the refrigerator door switch three times and now it is not functioning again. How many times should this happen. This is getting ridiculous.
For model number 79578099901
Hello Pam, Thank you for the question. This could be an issue with the wiring to the switch or the light socket shorting out the Switch. We suggest checking the wiring. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Edward
May 7, 2022
Need to replace light switch on my Kenmore refrigerator. What switch works on this model ?
For model number 795.76202.901
Hello Edward, thank you for writing. Yes, the number PS3529268 you had chosen is compatible with your model. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ladine
August 21, 2019
What is a multi meter?
Hello Ladine, Thank you for the question. A Multi Meter is a tool used to test electrical parts for Ohms and continuity ect. Here is a video that may help. Good luck with the repair!
https://www.youtube.com/watch?v=bWC44fHn0As
1 person found this helpful.
Was this helpful?
Thank you for voting!
Timothy
February 1, 2020
No light in fridge. When i push the door switch, the fridge/freezer temp readouts toggle on/off (located in same assembly as two light bulbs), but lights do not come on. Is switch working then? Maybe light socket is the culprit?
For model number 795.76203.901
Hello and thank you for writing.
It certainly sounds more like it could be a faulty light socket PS3529355 rather than the switch you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Remove and replace light switch
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
Debbie from Waltham, MA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
34 of 52 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fridge light would not come on.
After watching a few iTunes videos I was able to order the light switch from part select and within a week I had the new switch. I had a little trouble getting the switch out. I used a flat screw driver and taped around the edge to keep from damaging the wall inside. I found the clip on the right side and had to use some force to get it popped out, you may need to use pliers to disconnect the switch.
Grace from GALLOWAY, NJ
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
9 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light stopped working
Have had the Sears repairman come to the house to replace this part in 5 minutes for +$100.. twice. When my dad's stopped working, ordered the part and replaced it myself for the cost of the part and shipping. Use a screw driver to pry the right side of the switch and pull out. Best to watch a youtube video first. Takes about 5 minutes.
Tamara from MONDOVI, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad Push Button Switch
I followed the directions! It was so easy that I bought another switch for my sister's fridge (same as mine). Her light was out too!
Dorothy from KINGMAN, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator light not coming on when door opens.
Unplugged the refrigerator. Used small flat head screw driver to push the front tab of the old switch in and pulled it out with pliers. Detached and reattached the wires to the switch. Reinserted back into hole. Plugged refrigerator back in to power. All good.
John from BONITA SPGS, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
interior light switch did not turn off light in ref
pried out old switch, disconnected wires ,placed wires on new switch
Timothy from SUSANVILLE, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator light not working. If I would flick the button it would go on for a minute but not stay on.
The old switch was a little hard to get out....took me a couple tries. I couldn’t move the frig out to unplug it, so just shut the power off in the kitchen. But, I was happy that’s what the problem was and so happy to have the light back on......it was probably three years it didn’t work!
Dawn from NORTH BRANCH, MN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light doesn’t come on when fridge door opens
Pulled fridge away from wall, unplug electrical connection, open fridge door, use knife to prize out door switch, pull off and replace switch from electrical wiring.
Lloyd G from QUEENS VLG, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light switch for refrigerator not functioning
Followed instructions online
shirley from ONALASKA, WI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lights out on refrigerator
Unplugged the refrigerator, Taped around the edges of switch as I had read to prevent possible scratches, used very thin flathead screwdriver to pry out old switch, unplugged old switch, plugged in new switch, put it back in opening, plugged fridge back in, and I had beautiful light! Hardest part was unplugging the refrigerator!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
MARYANN A - February 4, 2023
Verified Purchase
REFRIGERATOR DOOR SWITCH LIGHT
We had not had a light in the fridge for a while this was awesome to put in easy and now we
have light perfect.
★★★★★
★★★★★
Alan M - January 29, 2023
Verified Purchase
Perfect Part, Easy Repair
The part, a refrigerator door switch, arrived in a timely manner. It fit perfectly and was easy to install. The light in my fridge works again. Very happy.
★★★★★
★★★★★
Robin D - December 17, 2022
Verified Purchase
So far,so good.
The light switch I replaced is still working ,so I'm happy.
★★★★★
★★★★★
Robert C - December 16, 2022
Verified Purchase
Replacement Switch
Very satisfied with the condition of the part. Quick and easy to replace on my own. The refrigerator light comes back on without any issues.
★★★★★
★★★★★
James R - November 30, 2022
Verified Purchase
easy to install
Install was easy and took care of the no lite on.
★★★★★
★★★★★
Jennifer M - November 10, 2022
Verified Purchase
Easy repair for this homeowner
Last time we paid a repairman to do this. I saw how easy it was so I did it myself.
★★★★★
★★★★★
Marcelo O - September 14, 2022
Verified Purchase
Easy fix
Fridge is working fine
★★★★★
★★★★★
Joel F - April 13, 2022
Verified Purchase
Exactly what I needed
My refrigerator now has a light.
All as hoped.
★★★★★
★★★★★
Edward K - December 8, 2021
Verified Purchase
LG door light swiitch
The door light switch was shipped and received early. It was easy to install and is now working fine.
★★★★★
★★★★★
Lukas R - December 1, 2021
Verified Purchase
Quality part, pretty easy install
Part came as expected, quality part. Didn't need a manual to replace it. If you have a pocket screw driver and an automotive plastic trim tool, it's easy.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff