3528955-1-M-LG-6322FR2046G-Thermistor,NTC
Part Location Diagram of 6322FR2046G LG Thermistor,NTC
See part K350 in the diagram
( Grid squares measure 1x1 inch )
3528955-1-S-LG-6322FR2046G-Thermistor,NTC 3528955-2-S-LG-6322FR2046G-Thermistor,NTC Part Location Diagram of 6322FR2046G LG Thermistor,NTC
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Thermistor,NTC 6322FR2046G

 Fits your WT1101CW!
★★★★★
★★★★★
4 Reviews

Rated by 3 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 37.55
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your WT1101CW!
PartSelect Number PS3528955
Manufacturer Part Number 6322FR2046G
Manufactured by LG
Troubleshooting
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
LG, Kenmore.
Part# 6322FR2046G replaces these:
6323EL2001G, AGF78408516
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.8
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jennifer B - October 16, 2022
  Verified Purchase
Great, fast service
Recommend them. I had to deal with customer service. They were great.
★★★★★
★★★★★
Mike B - January 6, 2021
  Verified Purchase
Simple repair, 5 minute job.
Perfect fit, easy repair.
★★★★★
★★★★★
Robyn D. S - March 4, 2019
  Verified Purchase
Repair went well.....
Part was easy to install and fixed the error code, unfortunately there was another issue we didn't know about. It had NOTHING to do with the part we ordered, that worked.
★★★★★
★★★★★
Angelica C - October 12, 2018
  Verified Purchase
Easy repair
The part took forever to arrive (1-2 weeks), but was fortunately in great condition. My washing machine is working perfectly now.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.3 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washing machine was displaying te code. Quick google search to diagnose the issue.
Very simple repair after watching YouTube video on how to complete repair.
  • Richard from DICKSON CITY, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was stopping during the spin cycle and making a grinding noise.
Our Samsung HE washer started making a grinding noise and stopping at the end of the rinse/spin cycle. I had replaced the clutch and seal 2 years ago and it sounded like it was going out again, however we were not getting the gunk inside the tub like before (seal) and the machine was throwing the tE error code when it stopped which it did not do last time. According to the manual this meant a thermistor error and the solution was "Call for Service". The machine is 9 years old and way out of warranty so....uh No! I ordered the new thermistor for $15 plus shipping to correct the tE code before looking to replace the clutch again or get a new machine. The new thermistor arrived, leaned the machine on its back, unplug one connector, remove two screws and pull the old one out of it's hole, push the new one in, replace two screws and the connector and GO! Problem fixed! No tE code, no stopping, no grinding noise. As best I can tell, the old thermistor was faulting during the spin cycle and the machine went into emergency stop mode which made the grinding noise. It was not the clutch or bearing at all. Most of the repair time was moving the machine out and disconnecting lines so I could lean it onto its back. Note: If your machine is stopping before draining, it will have water inside the tub which will drain out of the hole where the thermistor goes when you pull the old one out. It has an o-ring to seal it, so just expect a little water to come out and be ready to catch all the water or put the new one in quickly.
Read less
  • Mike from MANOR, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top loading washing machine displayed "tE" error
Disconnect machine from power source. Then, disconnect any tubes from the back side (make sure you close any water valves before doing so). Then, lay the machine on its back to access the bottom of the machine. Then, locate the thermistor and replace it with the new one (the thermistor will have two screws holding it in place, simply remove the screws and replace the thermistor, then screw it back in). After the new part is installed, stand the machine back up and make sure to connect any tubing to its proper place. Done.
Read less
  • Angelica from HOUSTON, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Wrench (Adjustable)
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
September 3, 2019
Washer started to make a loud noise like gears grinding. I replaced the clutch mechanize, but it still makes the noise. I tried just using the spin function and it continues to sound as if the gears are not connecting. What other parts could cause this issue? Thanks
For model number WT5070CW
PartSelect logo
Hello Jerry, Thank you for the question. This could be an issue with the Rotor Assembly, PartSelect Number PS3522937. Hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Rotor Assembly
$318.28

  In Stock
  • 1
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3528955
Manufacturer Part Number: 6322FR2046G
Brand
Model Number
Description
LG
048231013369
Washer Dryer Combo - Washer-Dryer
LG
048231013635
Washer Dryer Combo - Washer-Dryer
LG
25667
Washer Dryer Combo - Washer-Dryer
LG
29002
Washer Dryer Combo - Washer-Dryer
LG
29272
Washer - Washer
LG
29472
Washer - Washer
LG
31463
Washer - Washer
LG
31512
Washer Dryer Combo - Washer-Dryer
LG
31513
Washer - Washer
LG
31522
Washer Dryer Combo - Washer-Dryer
LG
31552
Washer Dryer Combo - Washer-Dryer
LG
31553
Washer - Washer
LG
31622
Washer Dryer Combo - Washer-Dryer
LG
31623
Washer - Washer
LG
35452
Washer Dryer Combo - Washer-Dryer
LG
35563
Washer Dryer Combo - Washer-Dryer
LG
42652115
Washer Dryer Combo - Washer-Dryer
LG
793396
Washer Dryer Combo - Washer-Dryer
Kenmore
79629002000
Washer
Kenmore
79629002010
Washer
Kenmore
79629272000
Washer
Kenmore
79629272010
Washer
Kenmore
79629272900
Washer
Kenmore
79629278000
Washer
Kenmore
79629278010
Washer
Kenmore
79629278900
Washer
Kenmore
79629472000
Washer
Kenmore
79629478000
Washer
Kenmore
79631522210
Washer - Kenmore Washing Machine Model 796.31522210 (79631522210, 796 31522210) Parts
LG
LGWT7700HVA
Washer Dryer Combo - Washer-Dryer
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Thermistor,NTC
$ 37.55
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.