They are all strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
Part# 5301EL1001J replaces these:
AP4439759, AEG72910301
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
January 14, 2018
Dryer runs but does not heat up at all would this be the part?
For model number DLEX7177WM
Hi John, Thank you for the question. In most cases you can see physical damage to the element if it is burnt out. I suggest testing the element with a multi meter. You can also test the Thermostat , Part Number: PS3530481 and the Thermal fuse, Part Number: PS3530485 on the element fuse and the Thermister, Part Number: PS3529026 and the thermostat, Part Number: PS8747887 on the blower housing. In most cases one of these parts are defective. Hope this helps!
What should the ohm reading be for the heating element?
For model number LG DLE8377NM
Hello Amber, Thank you for your question. The heating element should be reading between 0-50 ohms of resistance. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Don
January 26, 2020
How can I tell if my heating element is bad before taking the dryer all apart? I have made sure that lint is not a problem. I have reset the breaker and made sure that full power is to the terminal block.
I have preformed the heat test by getting the code 1n5. As the test completes, the only code that shows up is no or n0.
For model number DLEX2801W
Hi Don,
Thank you for your question. You will need to test the part with a multi-meter. Disconnect your dryer from the power source and locate the heating element. Depending on your model, you may need to open your dryer’s cabinet to access the heating element. Remove the heating element from the dryer and visually inspect it for signs of damage or burning. Set your multi-meter to the Rx1 setting and touch the probes to element terminals to test for continuity. If you receive a reading of infinity, you need a replacement heating element. We hope this helps. Thank you and have a great day.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Debi
January 14, 2022
Can you tell me the difference between part #5301EL1001A and 5301EL1001J? Both are indicated for the same part in the parts diagram (F110) and this model # is indicated on the model cross reference for both parts.
For model number DLE5977S
Hello Debi, Thank you for your inquiry. We are showing that part# 5301EL1001J is the updated replacement for 5301EL1001A. We hope this helps.
Does the heating element 5301EL1001J have 2 or 3 terminals?
For model number DLE2516W
Hello Sheila, Thank you for your inquiry. We show that this part has two wires, so two terminals. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
