Radiant Heater 5300W1R004A

Hi Ray, thank you for your question. You will need to check both your radiant element and your switch to determine which part is causing your issue. You may also just want to check that the wiring is properly connected as well. You can test both parts with a multi meter. For the switch, it should read closed when you turn the switch to an on position (after removing it from your appliance and power). If it reads open then the switch is bad. Your radiant element should be reading between 0 and 120 ohms of resistance. If it does not show that then the element will need to be replaced. I hope that helps. Good luck with your repair.

Hello Roger, thank you for your inquiry. For your model LSC5622WS, the correct radiant element is part number PS3527756. We hope this information helps!

Hi John, Thank you for your question. If you have tested all of these parts and they are working correctly, then the issue is with either the wiring or the electronic control board and you will need to check these parts to see which one is causing the issue. We hope this helps! If you have any questions, please let us know.

Hi Michael, Thank you for your question. The part number listed under your model number for the right-front burner element is PS8752623. The part number listed for the left front burner element is PS7795472. If you need help placing an order for these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Hello Frank, thank you for your inquiry. The right front element for your model is part number PS3535351. You may need to replace the left front burner switch, part number PS3533613, to fix the high-setting issue. We hope this helps, good luck with this repair!