Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Denise F - September 7, 2020
Verified Purchase
Easy repair
I found a YouTube video to help with installation and it went smoothly. Can’t believe we lived with a broken door for years.
★★★★★
★★★★★
Alan B - April 3, 2020
Verified Purchase
Easy Job
Easy job , just make sure you get the opener lever inserted into the solenoid piston,or you'll be taking it back apart !
★★★★★
★★★★★
Shellie W - July 18, 2018
Verified Purchase
Ice Mountain again!
Having a working ice door has allowed us to begin making ice again. The repair was relatively simple. Care needs to be given in removing the unit from the outside of the door since the tabs can break pretty easily. But once removed, just one screw and replacing the spring, and the repair was complete. Part was exactly what was needed.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice chute door would open ok, but would not close unless you stuck your finger up inside and closed it.
Found a LG parts video and followed each step. Simple except getting the end of rod into the solenoid arm. Took a few tries, but got it.
I replaced solenoid, flapper heated door, and broken spring. Very easy instructions on "YouTube"
Wesley from WILTON, NH
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
6 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
February 12, 2020
Ice dispenser door (flap) will not open when ice falls into chute.
For model number LFX25950**
Hi Bill,
Thank you for your question. If ice is not dispensing, there are some parts that you will need to check to see which one is causing the issue. You will need to check the solenoid assembly, the ice chute door, the micro switch and the lever spring. We hope this helps. Thank you and have a great day.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Joan
January 2, 2018
I am looking for the recess grille that is shown in the dispenser parts diagram on your website. Is this part available? The part number inside the grille is abs 3806ja2149. It is impossible to clean as the water from the water dispenser accumulates and leaves white streaks.
For model number LSC27950SB
Hello Joan,
Thanks for your question. The dispenser grille you are needing is part number PS3521903, which we label as the drain decor. It can be ordered through our website or by calling us.
I hope this helps.
Hello Aurelio, Thank you for your inquiry. Remove the dispenser housing from the door. Then unhook the water line under the door. Pull the old tube out through the dispenser housing. Push new tube into the hole of the dispenser and feed it down through the door and out of the hinge hole. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
