
Spring,Hinge
$
16.98
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number PS3524564
Manufacturer Part Number 4970ED4004G
Manufactured by
LG

Check if this fits your product and find model diagrams
Need help finding your model number?
Product Description
Spring,Hinge Specifications
The door spring, used in dishwashers, adds tension to the door through the door hinge to keep it from opening too fast. If you have a door latch failure or your washer door drops too quickly when opened, it is best you replace this part to fix the problem. Refer to the manual provided by the manufacturer for installation instructions and further repair guidance. Unplug your dishwasher from the power source before you begin this repair project as a safety precaution.

How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door latch failure | Door won’t close
This part works with the following products:
Dishwasher.
This part works with the following products:
LG.
Part# 4970ED4004G replaces these:
AP4997045, 4970ED4004A
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
October 22, 2017
In order to pull out the dishwasher unit there is a door gasket (not the tub gasket) that is flush with the surrounding cabinet. It is an upside down "u" shape in three straight pieces, and i cant figure out how to remove it without damaging it. I am trying to replace the door springs as the door is currently falling all the way open. Is there a way to remove it and put it back without damaging it, or should i try to slide the unit out with the gasket in place? If there is a way to send a picture i can do that. Thank you, bill
For model number LDF7932ST

Hi Bill,
Thank you for your question. Actually you do not have to remove that gasket at all when pulling out your dishwasher. To remove the gasket, you actually have to remove your mounting brackets at the top of your dishwasher and then pull the machine out a little bit. You would then slide the left and right sides up from your dishwasher and then pull your gasket off. I hope that helps! Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken door spring allows the door to overextend to the floor if not propped.
Simple, removed screws securing machine in the cabinet, then pull the unit out of the cabinet space about 10 inches. Springs are accessible within this extension. You need strong hands to extend the springs and attach them. Once attached, push machine back in place and re-install the anchor screws. In my situation, only one spring was broken, so the attached side revealed the correct slot to place the hook on the top position, the bottom position has a plastic lead for the spring, and that lead is attached to a rope to the door hinge. Note: Replace BOTH springs, even if only one is broken.
-
Gregory L from INDEPENDENCE, OH
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
23 of 25 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door was very heavy due to spring problem
Turn off the power at breaker box. Disconnect the power at dishwasher since I needed to pull the unit all the way out of the cabinet to get to screws on the back side for this model. Find and remove the screws to the cover. Remove cover. In my case, the rope on the connector assembly had snapped. I replaced spring and connector identically to functioning side. Did need a pair of pliers to provide enough tension on spring to install. Reconnected cover and power and moved back into the cabinet. Easy repair and my wife wondered why I hadn't done it sooner.
Other Parts Used:
-
Greg S from BELLE ISLE, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Supply line leaked afterwards. Had to replace it. Installers(Home Depot) had it rigged and now it is loose. Going to have to rig it somehow.
Loosened 3 screws and unhooked supply line and electric box and pulled it out.
Other Parts Used:
-
Mark from IRWIN, PA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench (Adjustable)
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Don D - June 2, 2020
Verified Purchase
eazy repsir
spring came fast and fixed the problem
Charles R - August 8, 2018
Verified Purchase
Easy install drip pan
The instructions were simple as was installation.
- < Prev
- 1
- Next >
You May Also Need?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3524564
Manufacturer Part Number: 4970ED4004G
Manufacturer Part Number: 4970ED4004G
Brand
Model Number
Description
