Refrigerator Door Gasket Retainer - Right Side 4930JJ2028A

Hi Ernie, Thank you for your question. This part is the right side door gasket retainer. The cam shaft does attach to the top of this part. I hope that helps. Good luck with your repair.

Hello Richard, Thank you for your inquiry. We do not have video at this time, but you can replace the holder by pulling off the door trim, then pulling the gasket back and detaching the holder from the door liner with a screwdriver. Pull the edge of the gasket away from the liner and turn it outward. You can now slide the old gasket holder off. Install the new holder by sliding onto the gasket. Realign the gasket on the door liner. Make sure the edge of the gasket holder is placed behind the lip of the door frame. Top the holder spring into the slot in the liner, then snap the holder into place. Re-install the door trim. Hope this helps!

Hi Jo Ann, Thank you for your question. The holder gaskets would have different part numbers for each door. The part number listed under your model number for the left side holder gasket is PS3524321. The part number listed for the right side holder gasket is PS3524318. I hope this helps. Thank you and have a great day!

Hello Kay, thank you for your question. The Right Door gasket retainer Part PS3524318 measurements are ?approximately 39 x 1.25 x 1.25 inches and the Left Door gasket retainer part PS3524319 measures approximately 38" x W: 1" x H: 1". We hope this helps.

Hello Joseph, Thank you for your question. To install the gasket retainer, first you want to unplug your refrigerator. After you've made sure there is no power going to your appliance, proceed to remove the door trim from the side of the door. Next you pull the gasket back and remove the gasket retainer from the door liner. You will see that near the corner, it will look like an average hinge at first glance. There is one on the bottom corner as well. Once you have removed the retainers, simply just place the new retainer into the gasket. You are going to want to make sure the edge of the gasket retainer is tucked behind the door frame. Check your retainer spring and tucked it into the slot, before finally pushing the retainer firmly in place. Do this for the top and bottom corners and simply just place the retainer bar back on to finish your installation. We hope this helps you.

Hello Rosari, Thank you for the question. Just enter the 4930jj2028a into the search box on the sit and it will show the current price right beside the Add to Cart button. Hope this helps!

Hello Herbert, Thank you for writing. Your Freezer Gasket is PartSelect Number PS3654116. We also have both the Left Door Gasket PartSelect Number PS3654117 and the Right Door Gasket PartSelect Number PS3652446. Good luck with your repair.

Hi Glenn, thank you for your inquiry. According to our research, your model has only one gasket retainer, part number PS3524323, and it measures approximately 37 1/2 inches. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!

Hello JEAN and thank you for writing. Gasket part number: PS3654118 is in the list of compatible items for your model. We hope this helps. Please contact us anytime. If you would like to place an order with our company or inquire about pricing, availability, and shipping, you will have to contact our customer service. You can do so one of two ways: online: www.partselect.com or telephone: 888-738-4871. Thank you.

Hi Mike, Thank you for the question. We have the 4930JJ2028A listed as the right side. It will be your right side as you are standing in front of the appliance looking at it. Hope this helps!