Circulation Pump Motor - 120V 60Hz 4681EA2002H | Official LG Part | Fast Shipping | PartSelect
Circulation Pump Motor - 120V 60Hz – Part Number: 4681EA2002H
Circulation Pump Motor - 120V 60Hz – Part Number: 4681EA2002H Circulation Pump Motor - 120V 60Hz – Part Number: 4681EA2002H Circulation Pump Motor - 120V 60Hz – Part Number: 4681EA2002H Circulation Pump Motor - 120V 60Hz – Part Number: 4681EA2002H https://partselectcom.azureedge.net/Schematics/LG/138536-1.gif

Circulation Pump Motor - 120V 60Hz

Product Description

Circulation Pump Motor - 120V 60Hz Specifications

On a washer, this part is used for circulating the water. On a dishwasher, it is used for draining the water during operation. If you notice your appliance is not draining properly, the circulation pump motor may need to be replaced. If this part is for your washer, you may notice your clothes are not cleaning properly. In your washer, to access this part you will need to remove the entire front panel. The circulation pump is 120 volts and 30 watts. The part is white in color and is sold individually. This OEM part comes directly from the manufacturer.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Will not drain | Not draining | Noisy

This part works with the following products:

Dishwasher, Washer.

This part works with the following brands:

LG, Kenmore.

Part # 4681EA2002H replaces these:

1461702, 4681EA2001S, 4681EA2002D, 4681EA2002H, 4681EA2002H, AP4438603.
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 3.1 / 5.0, 3 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dean from COMMACK, NY
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
4681EA2001T, 4681EA2002H
Drain pump needed to be replaced
Replaced drain pump following easy to follow video. Also replaced circulation pump at same time, as it is connected to common sump housing and only added a few more minutes to repairs.
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Gregory from DENVER, CO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Parts Used:
4681EA2002H
leak from bottom front left.
Disconnect washer - pull out and turn on it's right side. Remove bottom plate (2 screws). Water intake valve is attached to water line. Disconnect water line. On the other end of the pump is a rubber hose. Disconnect hose by using a pair of pliers to open pipe clamp. Disconnect the electric line by pulling the pronged plug out of the pump. The part is composed of the pump and a metal mounting plate. They are connected by 4 screws. Remove the screws and pull out the back half of the pump. The front of the pump is attached to the washer frame by 2 screws. When removed you will notice an o-ring that forms the seal between the two halves. Remember this when installing the new pump. You will have to take the new pump apart because the whole part will not fit through the frame opening, thus the need to make sure the o-ring is properly seated. You can either install the mounting plate to the frame then attach the pump half or with half of the part in front of the frame and the other half behind the frame connect the two, then attach it to the frame. Reconnect incoming water line using teflon tape and a crescent wrench. Reconnect out-flow line with the pipe clamp and attach the power line. Since you have to take the new pump apart make sure the o-ring is properly seated as it will have a tendency to fall out. Reassemble the rest.
1 person found this instruction helpful.
Was this instruction helpful to you?
Patricia from N VERSAILLES, PA
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Parts Used:
4681EA2002H
She sent the wrong part!!!!!!
She sent me the wrong part.Well I sent you the wrong part back diagram number M050 is a pump .We were on the same diagram I told her I needed part #M060 it is a 120 volt electric motor.Very disappointed in her service! I got the part elsewhere.
1 person found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
2 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS3523285
Manufacturer Part Number: 4681EA2002H
Brand
Model Number
Description
LG
41022
Washer - LG Washing Machine Model 41022 Parts
LG
41028
Washer - LG Washing Machine Model 41028 Parts
LG
41029
Washer - LG Washing Machine Model 41029 Parts
LG
41542
Washer - LG Washing Machine Model 41542 Parts
LG
41548
Washer - LG Washing Machine Model 41548 Parts
LG
41549
Washer - LG Washing Machine Model 41549 Parts
LG
41722
Washer - LG Washing Machine Model 41722 Parts
LG
41728
Washer - LG Washing Machine Model 41728 Parts
LG
41729
Washer - LG Washing Machine Model 41729 Parts
LG
42192
Washer - LG Washing Machine Model 42192 Parts
LG
42198
Washer - LG Washing Machine Model 42198 Parts
LG
42199
Washer - LG Washing Machine Model 42199 Parts
LG
48231009799
Washer
Kenmore
79640441900
Washer
Kenmore
79640448900
Washer
Kenmore
79641022900
Washer - Kenmore Washing Machine
Kenmore
79641028900
Washer
Kenmore
79641029900
Washer
Kenmore
79641372210
Washer - WASHER
Kenmore
79641372211
Washer - WASHER
Kenmore
79641542110
Washer
Kenmore
79641548110
Washer
Kenmore
79641549110
Washer
Kenmore
79641722010
Washer
Kenmore
79641728010
Washer
Kenmore
79641728900
Washer
Kenmore
79642192900
Washer
Kenmore
79642198900
Washer
Kenmore
79642199900
Washer
LG
D1401TB
Dishwasher - LG Dishwasher Model D1401TB Parts