Quick Question!

Have you ever purchased from PartSelect.com before?

See part K122 in the diagram


Your Price

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS3522891
Manufacturer Part Number 4280FR4048C
Manufactured by LG

Tub bearing supports the spin basket shaft at the bottom of the washer tub. If your tub bearings are damaged or faulty, the washer will run noisier than usual during the spin cycle. Tub bearings are meant to ensure free movement of the wash basket. In top-loading washers, there will typically be two bearings: one where the shaft connects to the clothes basket and one at the bottom or transmission input. In front-loading washers, both bearings will be supporting the clothes basket shaft at the back of the outer tub. The bearings have an outside diameter of approximately 3 inches.

This part works with the following brands: LG, Kenmore.

This part works with the following products: Washer, Washer Dryer Combo.

This part fixes the following symptoms:

  • Noisy.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.0 / 5.0, 1 reviews What's this?
1-1 of 1

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver, Screw drivers, Socket set, Wrench set
Customer: Steven from PHOENIX, AZ

The bearings on the tub were noisey when it was spinning fast speed.

disassembled the top and front installed the shipping bolts in the tub back housing, removed the rear bolt on the stator and removed the shell the magnets have some strong pull, had to split the plastic inner tub in half, removed the 2 lower front shocks and then removed the inner drum,, both bearings and the seal were bad, drove out inner bearing and seal with bearing driver about 2 ft. long and then drove out the rear bearing, cleaned bore and installed new bearings and seal, the spider on the back of the inner drum was damaged from rust damage in the seal area, replaced with new part and reassembled the hardest thing was the 2 side springs, broke one of the plastic noise brackets will order another, got the rest of the washer back together , will install the top after replacing spring noise bracket., block of wood and car spring pliers for rear brakes would probably be easier for the spring install. .Took about 6 hours to disassemble and install new parts. The repair manual was ok for top and front disassembly but no further info on removing the other parts. Used common sense for the rest, used to repair garbage trucks.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1

Model Cross Reference

This part works with the following models:

PartSelect Number: PS3522891
Manufacturer Part Number: 4280FR4048C
Brand Model Number Description
LGWM1812CWWasher - Residential WASHER
LGWM1814CWWasher - Residential WASHER
LGWM1815CSWasher - Residential WASHER
LGWM2010CWWasher - Residential WASHER
LGWM2016CWWasher - Residential WASHER