3522854-1-M-LG-4036ER2003A-Gasket
Part Location Diagram of 4036ER2003A LG Gasket
See part K125 in the diagram
( Grid squares measure 1x1 inch )
3522854-1-S-LG-4036ER2003A-Gasket 3522854-2-S-LG-4036ER2003A-Gasket 3522854-3-S-LG-4036ER2003A-Gasket Part Location Diagram of 4036ER2003A LG Gasket
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Gasket 4036ER2003A

★★★★★
★★★★★
1 Review

Rated by 3 customers 

Difficult 

More than 2 hours 

Ratings submitted by customers like you who bought this part.

$ 25.22
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS3522854
Manufacturer Part Number 4036ER2003A
Manufactured by LG
Product Description

Gasket Specifications

This genuine OEM drum seal gasket prevents water from leaking between the outer tub and spin basket of your washer. It is made of black rubber and measures 2.5 inches in diameter. If your washer is leaking, and running noisier than usual, check for wear on the gasket, and to ensure it is properly fitted.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking | Burning smell
This part works with the following products:
Washer.
This part works with the following products:
LG, Kenmore.
Part# 4036ER2003A replaces these:
AP4437693, 4036ER3001A, AGF69478196
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
3.0
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    0
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Stephen D - December 25, 2018
  Verified Purchase
Did not look like the correct part.
Did not use. New part was in bag. I just used the old one. Replaced spider and tub gasket with no issues. Washer works and sounds like a new one.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 1.7 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
While replacing the tub support (spider) I chose to replace the gasket.
The spider repair and the tub seal replacement are fairly complicated, and time-consuming, but manageable with patience. I viewed the youtube video that showed the process, which gave me confidence. It entails disassembling the machine and removing quite a few major pieces. Take care with the numerous screws and bolts, and be patient and you can be successful. Plan a lot of time for all the steps.
The hardest part is putting the door bellows back on.
Read less
  • Robert from HYDE PARK, VT
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bearings were going out. Washer made extremely loud noise while spinning at high or medium speed. Also had burning smell when spinning
I followed the 35 min video on front loader bearing and seal replacement to a T. I went step by step pausing the video as the technician completed the task. It took 5 hours for me to complete which included the cleanup time. I am extremely happy how this turned out. It runs as good as a new machine. I did however find that our particular machine had an extremely large amount of mildew and mold inside the outer tub casing and attached to the spider arm. More than likely after seeing all this mold when it comes time for the next repair we will probably buy a new top loader. The repair parts and video were perfect! Thanks for the help. Local repair company recommended to me to just buy a new washer when I inquired about them repairing.
Read less
Other Parts Used:
BEARING,BALL Ball Bearing Gasket
  • David from BOWLING GREEN, KY
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable)
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the bearings on the tub were noisey when it was spinning fast speed.
disassembled the top and front installed the shipping bolts in the tub back housing, removed the rear bolt on the stator and removed the shell the magnets have some strong pull, had to split the plastic inner tub in half, removed the 2 lower front shocks and then removed the inner drum,, both bearings and the seal were bad, drove out inner bearing and seal with bearing driver about 2 ft. long and then drove out the rear bearing, cleaned bore and installed new bearings and seal, the spider on the back of the inner drum was damaged from rust damage in the seal area, replaced with new part and reassembled the hardest thing was the 2 side springs, broke one of the plastic noise brackets will order another, got the rest of the washer back together , will install the top after replacing spring noise bracket., block of wood and car spring pliers for rear brakes would probably be easier for the spring install. .Took about 6 hours to disassemble and install new parts. The repair manual was ok for top and front disassembly but no further info on removing the other parts. Used common sense for the rest, used to repair garbage trucks.
Read less
Other Parts Used:
Ball Bearing Manual,Service BEARING,BALL Gasket Gasket
  • Steven from PHOENIX, AZ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench set
13 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Gasket
$21.71
$21.71
  Special Order
BEARING,BALL
$39.06
$39.06
  In Stock
Ball Bearing
$45.55
$45.55
  In Stock
SPIDER
$204.11
$204.11
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3522854
Manufacturer Part Number: 4036ER2003A
Brand
Model Number
Description
LG
40021
Washer - LG Washing Machine Model 40021 Parts
LG
48842
Washer - LG Washing Machine Model 48842 Parts
LG
48842800
Washer Dryer Combo - Washer-Dryer
LG
48852
Washer - LG Washing Machine Model 48852 Parts
Kenmore
79640021900
Washer
Kenmore
79648842800
Washer
Kenmore
79648852800
Washer
LG
F1072FD
Washer - LG Washing Machine Model F1072FD Parts
LG
F1141FD
Washer - LG Washing Machine Model F1141FD Parts
LG
F1141FD1
Washer - LG Washing Machine Model F1141FD1 Parts
LG
WD-10580BD
Washer - LG Washing Machine Model WD-10580BD (WD10580BD, WD 10580BD) Parts
LG
WD-10583BD
Washer - LG Washing Machine Model WD-10583BD (WD10583BD, WD 10583BD) Parts
LG
WD-1070FH
Washer - LG Washing Machine Model WD-1070FH (WD1070FH, WD 1070FH) Parts
LG
WD-1243FHB
Washer - LG Washing Machine Model WD-1243FHB (WD1243FHB, WD 1243FHB) Parts
LG
WD-90282BD
Washer - LG Washing Machine Model WD-90282BD (WD90282BD, WD 90282BD) Parts
LG
WD-90286BD
Washer - LG Washing Machine Model WD-90286BD (WD90286BD, WD 90286BD) Parts
LG
WD1243FHB
Dryer - Dryer
LG
WM1812CW
Washer - Residential WASHER
LG
WM1814CW
Washer - Residential WASHER
LG
WM1815CS
Washer - Residential WASHER
LG
WM2010CW
Washer - Residential WASHER
LG
WM2016CW
Washer - Residential WASHER
LG
WM3431H
Washer - WASHER
LG
WM3431HS
Dryer - Dryer
LG
WM3431HW
Dryer - Dryer
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Gasket
$ 25.22
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.