Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Diane W - May 9, 2022
Verified Purchase
Exactly as Expected!
The part was exactly what I needed. It was an easy install! I would buy from you again!
★★★★★
★★★★★
Ken E - February 22, 2019
Verified Purchase
Worked perfect, easy fix
Found the part easy by just knowing the machine model number. The picture showed it was a match, and it was! So easy!
★★★★★
★★★★★
Mary Ann W - November 19, 2018
Verified Purchase
Works perfectly, fast shipping!
Our dryer latch finally broke just from being worn out from age/usage. I was so happy to find a replacement. It works perfectly and we received it very quickly! Thank you!
★★★★★
★★★★★
Linda W - June 21, 2018
Verified Purchase
Kenmore dryer part
This part took longer than expected , i got it about two weeks after i ordered it and that is the only negative comment that i can make. I fixed it myself and not being very mechanical nor handy this was a huge deal! Thanks
★★★★★
★★★★★
Richard C - June 5, 2018
Verified Purchase
Great!
Fast shipping and as described, thanks
★★★★★
★★★★★
Thomas T - March 14, 2018
Verified Purchase
Dryer door repair.
So easy, can't believe how easy it was. Thanks PartSelect.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Locker assembly broke
Just unscrewed the original lock and screwed the new one on it was very easy
temeaco from TULSA, OK
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not shut completely.
After replacing the locker assembly (female) on the machine, The door strike(male) was hitting well below the locker. I realized that the screws holding the door hinge were loose. Tightening them brought the strike up far enough to engage the locker, although it still hits a bit low. That might have been the real problem, not the latch, s
... Read moreo check the hinge before you order the latch parts.
Part showed up in 2 days and repair took 2 min. Very easy. Thank you!!
Paul from OVERLAND PARK, KS
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
September 26, 2023
My door shuts but after a few minutes dryer stops, use duct tape to pull tight and works. Could it be the latch?
For model number Dlg2051w
Hi David, thank you for contacting us. Based on our understanding of the issue, we would recommend checking the locker assembly, part number PS3522843, as it is most likely faulty and may need to be replaced. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sid
December 31, 2017
Can the door be set to open from either left or right?
For model number DLGX3371V
Hello Sid, Thank you for your inquiry. We are only showing a hinge for one side. Hope this helps!