
Microwave Door Latch Hook
Fits your LMV1683ST!
$
6.03
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your LMV1683ST!
PartSelect Number PS3522839
Manufacturer Part Number 4026W2A019C
Manufactured by
LG

Check if this fits your product and find model diagrams
Need help finding your model number?
Product Description
Microwave Door Latch Hook Specifications
The locker, also knows as a door latch assembly fits to the inside of the microwave door, and keeps the door closed. If the door on your microwave oven doesn’t appear to close properly, you may have a problem with the door latch assembly. This locker is made of plastic and measures 7 inches long x 2 inches wide. If either of the hooks is broken or does not have any spring tension, you may need to replace the assembly.

How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door not closing properly
This part works with the following products:
Microwave, Microwave Oven Combo, Range.
This part works with the following products:
LG, Kenmore, Amana, General Electric.
Part# 4026W2A019C replaces these:
AP4629678, 4026W2A019A
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Billie
May 22, 2019
Where are the screws located to open the door and install a new door latch?
For model number LVM1683ST/00

Hi Billie,Thank you for your question. Before you begin any repair please unplug the appliance from the electrical outlet. You will need to remove the plastic lining around the inside of the door. There are retainer clips holding the liner in place and you will need to use a putty knife to remove it. Depending on the type of microwave you have, you may have to come in from the bottom or from the top to remove the lining. Gently slide the putty knife in between the lining and the frame and go around the frame and gently pry it loose. On the hinge side you will need to come in from the backside to pry the lining off. The door latch is held in place by tension. There is a spring that is usually attached to the latch and to one of the fins on the door to provide it. With the inner lining removed you can now remove the old latch. Install the new latch by slipping it into the slots in the door and attach the spring to the bottom fin to allow for tension in the latch. Reinstall the lining and close the door. Plug the microwave back in. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gerald
October 5, 2021
Does the spring come with the new door latch?
For model number LMV1600SW

Hello Gerald, Thank you for the question. The Spring, PartSelect Number PS3524607 is sold separately. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Jeff
July 22, 2019
Does the door latch assembly come in any other material than cheap plastic?
For model number LMV1680ST

Hello Jeff, Thank you for the question. Since we only sell OEM parts we only have the original plastic latch that was made for the appliance. Very sorry for the inconvenience, good luck with this repair!
Was this helpful?
Thank you for voting!
Rick
July 24, 2019
My door latch broke tonight. I know the process to take it apart, but my concern is scratching the black ring that goes around the inside of the door. Can anyone tell me the best way to remove it? The right tool? Also, does the film have to be replaced definitely?
For model number mv1502w/01

Hello Rick, Thank you for the question. You will need to use a putty knife to pop the ring out of place carefully. It will just snap back in place. If the film is damaged it should be replaced. Hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The over the stove microwave door would not close.
I unplugged the microwave. I did watch a YouTube video to see how the plastic frame around the door could be removed. I used a putty knife to pry it off. The spring was still in good shape, so I hooked it up to the new latch/locker part and onto the microwave. This was just a little time consuming because I was trying to be careful so I wouldn't break anything on the new part. The plastic frame clicked right back on. I plugged the microwave in and it worked right away. If I can do it, you can do it. Sure beat buying a new microwave. Great experience.
-
Christine from LUXEMBURG, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door locker snapped off
Unplugged the microwave. I opened the door. I used a butter knife to pop the bezel off the inside of the door. I pushed the locker up and to the left and used the butter knife to pry it loose. Disconnected the locker from the spring, and reversed for the installation.
-
Dave from FOREST, VA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave door would not shut completely and would not activate switches
After checking all three switches for continuity I determined that the plastic door lever had warped or gone out of wack. After shutting off power at the breaker box I removed the door, the inside trim piece around the inside of the glass. Removed the black two prong door lever, reattached the new door lever and then reinstalled the trim piece and all screws. Works fine now. Easy fix just make sure your switches are all ok then replace the door lever.
-
Timothy from DELAND, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Latch broken... Spring off
You Tube
-
Toni bc from PORT ORANGE, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Latch spring keeper broke
Removed door from microwave and then popped the inside widow trim ring off. Removed 4 screws from the window bracket, replaced the latch with a new part and then assembled.
-
Gregg J. from WEST CHESTER, PA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
GUY G - December 1, 2022
Verified Purchase
Great part
Great
Clifford M - February 3, 2022
Verified Purchase
part fit great
just what I needed to fix the door and get the microwave back up and working
Myia B - December 1, 2021
Verified Purchase
Easy repair!
Great part easy to repair. Took all of 3 minutes....
Maria C - August 19, 2020
Verified Purchase
Easy repair
Exact match to part that needed to be replaced.
Nityananda H - March 31, 2020
Verified Purchase
Worked as expected
The part was delivered as expected.
Installation was not too difficult. You tube videos were very helpful.
Microwave is back in operation now.
Stan G - May 30, 2019
Verified Purchase
Very Easy Repair
I had the part in 2 days. It took 5 minutes to replace. I am extremely pleased. Thanks.
Cristy F - May 7, 2019
Verified Purchase
Part fixed problem!
The part for our microwave was under $5.00 and took care of the problem. The website was easy to use and clear. Very quick to arrive too!
Lynn K - May 4, 2019
Verified Purchase
Easy Repair
The door of my microwave stopped closing. I Googled how to repair it, ordered and received the part quickly from PartSelect and completed the repair in minutes saving me lots of $$.
Cheryl K - April 26, 2019
Verified Purchase
Latch
Exactly what I needed. Easy to install.
Dennis T - January 22, 2019
Verified Purchase
Worked as expected.
Timely receipt of part, installation was easy.
- < Prev
- 1
- 2
- Next >
You May Also Need?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3522839
Manufacturer Part Number: 4026W2A019C
Manufacturer Part Number: 4026W2A019C
Brand
Model Number
Description
Kenmore
72163293300
Microwave
- Kenmore Microwave Model 721.63293300 (72163293300, 721 63293300) Parts
Kenmore
72163662400
Microwave
- Kenmore Microwave Model 721.63662400 (72163662400, 721 63662400) Parts
