Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David W - September 2, 2018
Verified Purchase
Wrong!
The part was not what I was looking for and the tech said that the description was what I needed. Factory drawings are pretty poor.
★★★★★
★★★★★
James K - May 12, 2018
Verified Purchase
Part could have been mailed in an envelop, not ups. very small
needed to remove d/w from cabinet to repair.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher gave the Ne code
When I turned the dishwasher over I discovered the PS3579323 diverter motor had failed due to a leak around the PS3536016 valve, check. No use replacing the diverter motor without fixing the leak so I turned the machine back over and disassembled the spray arms and top of the pump cover which reveled the case assy and the valve, check. U
... Read morepon removal of the valve, check I discovered hair wrapped around it which compromised the MO31 packing and caused the leak. I probably could have just cleaned out the hair and reassembled it but because my installation is a bit of a pain I elected to change the case assy (because of a slight depression where the packing sets) the M031 packing, the MO25 valve, check, and the MO35 pump gasket. After that was accomplished I turned the machine upside down and replaced the MO26 diverter motor and reinstalled the dishwasher. End result: Ne code cleared, no leaks and now the dishes are clean on the top shelf and the wife is happy. There are great instruction videos on YouTube. Good luck!
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Matt
December 7, 2021
There is a rubber cam seal that sits between the DC circulation motor (diagram M060) and the impeller assembly (diagram M130). I cannot find this part in the "sump assembly parts" diagram. Can it be bought separately? is it included with the impeller assembly (diagram M130) or the upper case (diagram M131) ?
I can send a photo if it is helpful.
thanks,
For model number LDF7774ST
Hello Matt, thank you for your question. There is not a rubber cam seal that is in between the motor and impeller. Good luck and have a great day.
Was this helpful?
Thank you for voting!
Marcos
March 19, 2018
Need to replace the motor shaft seal on a Kenmore dishwasher. From diagrams i get a (3920ed4009b). But is sending me to an LG model.Can you please help me?
For model number 66513033K110
Hi Marcos,
Thank you for your question. You will want to search underneath your model number: 66513033K110. The parts for this machine are actually made by Whirlpool. From what I am seeing in your diagrams, your seal does not come separately from the sump. I have listed that part down below for you. I hope that helps. Good luck with your repair.
