Quick Question!

Have you ever purchased from PartSelect.com before?

See part K610 in the diagram

Shock Absorber Assembly

Your Price

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS3522309
Manufacturer Part Number 383EER3001E
Manufactured by LG

Sold individually

This part works with the following brands: LG.

This part works with the following products: Washer.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 1.5 / 5.0, 1 reviews What's this?
1-1 of 1

80 of 140 people found this instruction helpful

Parts Used:
  • Gasket
  • Shock Absorber Assembly
Level of Difficulty: Difficult
Time to do repair: More than 2 hours
Tools: Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Customer: Anthony from Crystal Lake, IL

Worn bearings

To replace the bearings a complete disassembly of the washer was required. After pulling the tube assembly from the cabinet and separating the tube enclosure halves and removing the rotor and stator, since the washer uses direct drive, a gear puller was required to push the drive shaft through the old bearings since they didn’t separate easily as seen in several YouTube videos. After removing the tube assembly it is recommended that you also separate from the spider, which contains the drive shaft, from the tube itself since a significant amount of sediment had caked inside the indentations on the inside of the spider. Since the front bearing, part number 4280FR4048D, was no longer available I used an NTN double sealed bearing, part number 6306LLUC3/L627. The only other tricky aspect of the repair was pushing the drive shaft through the new bearings since pushing it by hand did not produce enough force to get it through to expose enough of the shaft on the other side to be able to reconnect the rotor. The solution was to pull the shaft through rather than pushing it. To do this I placed a 1 3/4 inch drive socket over the outer ring of the rear bearing, and then I used a 3 inch 10mm x 1.50 mm bolt through the drive socket with enough large washers to use as spacers between the bolt head and the drive socket. I then threaded about a half inch of the bolt into the center of the drive shaft by hand to remove any gap between the bolt head and the washers. As I turned the bolt clockwise with a 17mm drive socket wrench the bolt pulled the drive shaft through the bearings with ease. I did follow the manufacturer’s recommendation to replace the seal between the two tube enclosure halves and the three dampers with new ones since they do eliminate much of the vibration during the spin cycle. I also replace the top bellows since I noticed that a large hole had been formed on it by rubbing against the inlet hoses which are situated directly above. The repair took a week only because I had to wait for parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1

Model Cross Reference

This part works with the following models:

PartSelect Number: PS3522309
Manufacturer Part Number: 383EER3001E
Brand Model Number Description
LGWM0532HWWasher - Residential WASHER
LGWM0642HWWasher - Residential WASHER
LGWM0742HGAWasher - Residential WASHER
LGWM0742HWAWasher - Residential WASHER
LGWM1832CWWasher - Residential WASHER
LGWM2032HSWasher - Residential WASHER
LGWM2032HWWasher - Residential WASHER
LGWM2042CWWasher - Residential WASHER
LGWM2075CWWasher - Residential WASHER
LGWM2077CWWasher - Residential WASHER
LGWM2277HBWasher - Residential WASHER
LGWM2277HSWasher - Residential WASHER
LGWM2432HWWasher - Residential WASHER
LGWM2442HWWasher - Residential WASHER
LGWM2677HSMWasher - Residential WASHER
LGWM3677HWWasher - Residential WASHER