
Lint Filter Guide Cover
$
29.93
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number PS3519694
Manufacturer Part Number 3550EL1006B
Manufactured by
LG

Check if this fits your product and find model diagrams
Need help finding your model number?
Product Description
Lint Filter Guide Cover Specifications
Located just inside the dryer door. The guide cover (or grill cover) is where the hot air circulates through the appliance. This part may crack or become damaged over time, causing clothes to get caught on it while it is in motion. Open the dryer door, remove the lint screen, and remove the screen using your screwdriver. Line up the new grill cover with the moisture sensor and the housing on either side, and it should snap into place. Once it is firmly in place, use your screwdriver to put the screws back in.

How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
LG, Kenmore.
Part# 3550EL1006B replaces these:
AP4439958, 3550EL1002A, 3550EL1006D
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
DEREK
January 8, 2020
I need the replacement for the lint screen assembly housing. However, mine has a sensor that plugs in. None of the replacement models shown have the sensor plugs.
For model number DLG2102W

Hello DEREK and thank you for writing.
The assembly is not available for your model so you would have to order the parts you need individually:
Lint filter PS3527578
Lint filter guide cover PS3519694
Guide PS3524629
Sensor PS3529161
We hope this helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Patricia
June 4, 2022
LG Electric Dryer I am trying to replace the guide cover but I need the one in which the sensor fits into the guide cover.
For model number DLE4970W

Hello Patricia, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3534930. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 2.4 / 5.0, 4 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
screen and filter need to be replaced
remove filter , unscrew old screen , clean old area and screw back screen and replace filter
Other Parts Used:
-
mary f from BERMUDA DUNES, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Doesn’t fit
The parts do not fit my dryer. The guide cover is about 1/4 in off. Screws don’t align with the holes. I can get one screw in but than Carly get the other one aligned. Lots of wasted time and frustration.
Other Parts Used:
-
Michelle from HOLTON, KS
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The holder for the lint screen was removed to vacuum lint. It broke when turned on.
I found that the screws that hold it in were a bit too short. After several cleanings I re inserted the screen only to have it dislodge and break. I ordered a new part and after using a drift pin and lamp I found that the screws were too short and the threads needed to secure it were worn. Longer screws solved the problem.
Other Parts Used:
-
George from Croton on Hudson, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint filter
Screw driver, headlight lamp.. a lot of cursing lol it wasn’t too bad I just couldn’t get it in at first
-
Eliza from HAUSER, ID
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Diane C - November 4, 2021
Verified Purchase
Worked wonderfully
Came quickly and was easy to replace.
Robert C - March 18, 2021
Verified Purchase
Easy repair
Part was new, arrived quickly and fit perfectly
Amber F - March 18, 2021
Verified Purchase
Worked as Expected
We ordered the Guide Cover the original one broke in half and a sock got sucked under the drum and the dryer quit working. Part arrived as scheduled. Only downside was that this part didn't include screws. We had to hunt for an original screw to know what to buy.
Brian B - November 19, 2020
Verified Purchase
Perfect fit. Got the part in 3-4 days and it took 5 minutes to replace. Works great!
Great part replacement
Leonel R D - October 8, 2020
Verified Purchase
Excellent
Very good
Rosetta S - August 5, 2020
Verified Purchase
Dryer part...
The part came in a timely manner and I was able to install it once I watch a you tube video. Dryer working well!!
Damon R - May 27, 2020
Verified Purchase
Part Recieved, fit great, was as described .
Thank you, My dryer is back up and running.
James K - May 13, 2020
Verified Purchase
Great part
It was a perfect fit to fix my problem..Thaks for a quick and easy replacement.10-12 minutes tops. Great part
Gloria M - June 16, 2019
Verified Purchase
Easy repair
Was perfect thanks
Raul Q - April 30, 2019
Verified Purchase
yes
ok
- < Prev
- 1
- 2
- Next >
You May Also Need?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3519694
Manufacturer Part Number: 3550EL1006B
Manufacturer Part Number: 3550EL1006B
Brand
Model Number
Description
