This part is the replacement ice tray for your refrigerator. The tray is made of white plastic and is approximately 9 inches in length, and 3 inches in width. It has the capacity for 8 ice cubes. The ice tray can be filled up with water and is the mold that shapes the ice cubes. If your current ice tray is cracked, warped, or if mineral deposits have settled inside it, it may cause the ice cubes to stick. This part is sold individually and is an authentic OEM part.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking | Ice maker won’t dispense ice
This part works with the following products:
Refrigerator.
This part works with the following products:
LG, Kenmore.
Part# 3390JA1150A replaces these:
AP4438280
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lisa
August 15, 2017
How do i change ice tray on lsc26905tt fridge
Hi Lisa,
Thank you for your inquiry. This is a fairly easy repair. Before starting any repair, unplug the refrigerator. Also there is a button under the unit on the far right that allows ice to be released from the tray. Press it to release the ice to allow for easy removal of the tray. Disconnect the clip from the bottom of old tray and remove the wiring carefully from bottom of tray. Carefully pull the back end of unit that the tray is attached to, to allow one end of tray to disconnect from unit. Then do the same for the other end. This should allow your old tray to come out. Do the reverse when installing the new tray. Please note that once the power to the refrigerator is restored, it may take 24 hours before the ice maker starts to make ice again. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Nic
December 28, 2017
How do i change the ice tray on this model ?
For model number LRSC26915SW
Hi Nic,
Thank you for your question. Unfortunately we do not have any installation instructions for your part specifically. Here is a video that may help you to figure out how the installation is done however: https://youtu.be/UQDha1DT7gQ. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Francesco
November 28, 2018
Kindly ask the exact dimensions of the cubes ice cubes fridge LG 3390ja1150a
For model number 3390JA1150A
Hello Fransesco, thank you for your question. The tray is made of white plastic and is approximately 9 inches in length, and 3 inches in width. It has the capacity for 8 ice cubes. The cubes are roughly 1.5 inches by 1 inches. I hope this helps!
Was this helpful?
Thank you for voting!
Carlene
October 28, 2021
The ice tray in my ice maker has a crack in it & leaks water. Is there a replacement ice cube tray for this model?
For model number LFXS28566M
Hello Carlene, Thank you for contacting us. Very sorry, we have researched the model you have provided and have found the Ice Cube Mold Tray for the Ice Maker is not sold separate from the Ice Maker its self, so the Ice Maker will need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hello Kari, Thank you for the question. The individual parts to the Ice Maker for this model are not sold. The Ice Maker would need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Is this compatible with LG fridge model LFD22786ST? Need to replace a crack in the tray only.
For model number LG LFD22786ST
Hello Caitlin, Thank you for your inquiry. We have researched the model number you have provided and we do not show this part as compatible. The ice tray for your model is only available as part of the ice maker assembly. We hope this helps.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The ice tray had warped and dumped water, which then froze down through the ice bucket and below.
To replace the warped tray, I found the service manual (pg. 124 below) which took some interpreting. Removed the lever. Then removed the assembly by two screws that are forward to the unit and go upwards. The insulation, sensor, and sensor cover are simply pulled down and off and the unit separated to removed the tray, and then insert the new tray. Proceed in reverse. Takes only a few minutes.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Matthew C - June 15, 2019
Verified Purchase
Easy repair, part fit perfectly
The part was easy to install and my icemaker is working perfectly!
★★★★★
★★★★★
Mary H - February 5, 2019
Verified Purchase
Ice cube tray
The part was fine and came quickly. It would have been nice to have instructions as we couldn’t find any for our model online.
★★★★★
★★★★★
Ronald S - September 12, 2018
Verified Purchase
Since there didn't seem to be a way to spread the ice maker mechanism apart to get the old ice tray out, I had to pry the old tray out and then Pread the 2 ends apart agin to get the new one in. Way afraid I'd break the plastic parts but there was just enough give for me to get the job done.
The OEM part matched the old one (except it wasn't warped). It came in a timely manner and works as intended (doesn't leak water that ends up freezing in a pile under the tray.)
★★★★★
★★★★★
Cory M - April 10, 2018
Verified Purchase
Ice Tray
The part I ordered was correct and in perfect condition. My ice maker is back to normal.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3518775
Manufacturer Part Number: 3390JA1150A
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
