This switch controls the stove top surface burner. This surface element control switch is for ranges.
Surface element control switch turns the surface element on and off and controls how much heat the element produces.
Unplug the range or shut off the house circuit breaker for the range before installing this part.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Range Dual surface element switch
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Kelvinator.
Part# 316238201 replaces these:
AP5325508, 2026203, 316238201, 316238200
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.5
Filter By Rating:
5 Stars
2
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Pauline C - April 6, 2022
Verified Purchase
Exactly what I needed
Dual switch replacement part, easy install and works like a charm. Thanks for being reliable.
★★★★★
★★★★★
Kerry D - April 28, 2021
Verified Purchase
Easy repair for surface burner switch
The Surface Burner Switch came very quickly from PartSelect and was in great shape, no trouble repairing my stove, it’s back to normal ! Thanks PartSelect !
★★★★★
★★★★★
James R - February 5, 2021
Verified Purchase
Easy to repair.
The part fixed my problem.
★★★★★
★★★★★
Philip P - June 16, 2018
Verified Purchase
Great job!
I received my part in the time it was promised, it was the correct one and it fixed my problem as the on line clinic said it should. Thank you, PartSelect!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.1 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The front left dual element stopped regulating temperature
Replaced the dual element switch and that fixed it up
Replaced switch by according to video with no issues, Terminals were nearly identical as the new switch.
The terminals on the new burner were not located in the same position as the terminals on the old burner. I had to reference the wiring diagram to locate the correct wire to terminal location. There was not enough slack in t
... Read morehe wires to position the new burner in the same position as the old burner. I had to rotate the new burner so the wires would reach. This cause me to have to rotate the warming burner because rotating the new burner, the terminals interfered with the terminals on the warming burner. I also had to reposition some of the wires so they would not contact the burner and terminals.
Ask our experts a question about this part and we'll get back to you as soon as possible!
16 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alfie
April 21, 2018
Received new part (infinite control switch) for large burner on Kenmore range. Prongs in back are different than old part. Not sure if part was updated or i received wrong part. If part is correct i need to figure out where the wires on the old prongs go on the new part.
For model number 7909611340A
Hello Alfie, thank you for your question. The burner switch for the large burner on your appliance is part number Surface Element Switch 316436001 - the part number 316238201 is for the dual element. The switches are specific to each size burner, so you would want to order part number Surface burner control switch for the large surface element part number 316436001. I hope this helps!
13 people found this helpful.
Was this helpful?
Thank you for voting!
David
January 24, 2019
The front left burner on my oven is stuck on high. What part do i need to replace?? i'm guessing it's the thermostat? or possibly the element?? any thoughts?
For model number LGEF3045KFH
Hello David thank you for your question. If the element is stuck on high that means that the switch that controls the burner is not functioning properly. You will want to replace the surface burner switch that controls that burner. Good luck with your repair!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Kristen
July 19, 2021
The front right dual burner will only work on high. What part do i need to order to make this repair? Thank you.
For model number 790.95429303
Hi Kristen,
Thank you for your question. Where the burner is only working on high, you will need to replace the front right burner switch. The part number listed under your model number for the front right burner switch is PS3504401. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
3 people found this helpful.
Was this helpful?
Thank you for voting!
John
October 30, 2017
My stove top & oven still isn't working after replacing the terminal block & the electronic control broad. What else could it be? Any suggestions?
For model number 79094359701
Hi John, Thank you for the question. I suggest checking all the wiring. A mouse may have got in and chewed some wires, or it may have shorted out. Other then the terminal block and the wiring there is no one part that would control the top and the oven. The control board controls the oven and each cooktop burner has its own control switch. The switches and the board all hook into a wire harness. If the new terminal block didn't fix the issue, I would look at the wire harness. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Gina
March 2, 2018
One of the cooktop burners isn’t working (getting hot)- all other burners work. I think it’s a switch but does each burner have their own switch or is there one switch box for the whole stove?
For model number 79094459700
Hi Gina, Thank you for the question. Each burner has its own switch. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Baocheng
December 13, 2019
My right front element (larger one) heats up intermittently (e.G. On/off intermittently). What is reason for it? Thanks, baocheng
For model number 790.9419
Hi Baocheng, this could be a faulty burner or switch. However According to our database, the model number you provided is just a portion of a model number with multiple possible variations. To ensure that we recommend parts that will work for your model, please check your information again; you will need to provide us with the full model and serial numbers located on the sticker on the unit itself. Once we have that information, we would be happy to find the part you need. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tim
January 16, 2020
Is this the switch that controls the dual surface burner on the right front of the stove for high and low temperatures?
For model number PS3504401
Hi Tim,
Thank you for your question. Yes, this would be the correct switch for the dual surface burner. We hope this helps. Thank you and have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Howard
August 10, 2021
My front right dual burner switch continuously clicks trying to control the on time for the burner(s). It does this in both the single (inner) burner and dual both burner position. Only the outer burner heats and controls. The inner burn will not not turn on. How do I know or check to see if it's the dual burner or the switch? All other burners work properly.
For model number 790.96532503
Hello Howard, Thank you for the question. We suggest testing the element for continuity. The Element should read closed. You can also remove the elements and look for brakes or burnt spots on the ribbon cable or in the element. We hope this helps!
Rt.front 11 inch element stays on high.temp, control doesn’t respond.has been making cracking noises since we purchased it.s/nvf64524487
For model number lfef3048qfa
Hi Travis, thank you for reaching out. Based on the description that you have provided, we would recommend checking the following parts: dual surface element, part number PS6012259, dual surface element switch, part number PS3504401, and knob, part number PS2581841. We hope this sorts out your problem!
Burner switch was ordered to replace 316238200. Replacement part 316238201 was received. The connection prongs on the back are different than the original. Need instructions on installing myself to save service call charge.
For model number LGEF3031KWB
Hello Dewayne, Thank you for the question.Looking at the old switch, you will see markings on the spades. They should match the new switch but may not be in the same location on the unit. Match L1 to L1 and L2 to L2 ect. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
